Ph.D, (Manufacturing Engineering), Imperial College London, UK
Master of Science (MSc), (Industrial and Production Engineering), Bangladesh University of Engineering and Technology
Bachelor of Science (BSc), (Industrial and Production Engineering), Bangladesh University of Engineering and Technology

Honors and Achievements

World's Top 2% Scientist, Stanford University, 2022
Commonwealth Scholarship, Commonwealth Scholarship Commission in the UK, 2019
Outstanding Reviewer, Elsevier, 2018
Invited Talk on Research and Publications: What, When, and How, Department of IPE, BUET, 2018
Dean's Scholarship, Bangladesh University of Engineering and Technology, 2009

Publications

Novel comparison concept between CBN and Al2O3 grinding process for eco-friendly production, Journal of Cleaner Production, 2022
Development of process performance simulator (PPS) and parametric optimization for sustainable machining considering carbon emission, cost and energy aspects, Renewable and Sustainable Energy Reviews, 2021
Swarm intelligence based selection of optimal end-milling parameters under minimum quantity nano-green lubricating environment, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021
Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review, Journal of Manufacturing Processes, 2021
Multi-response optimization of the actively driven rotary turning for energy efficiency, carbon emissions, and machining quality, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2021
Investigation of surface modification and tool wear on milling Nimonic 80A under hybrid lubrication, Tribology International, 2021
Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: a review and future prospect, Journal of Materials Research and Technology, 2021
Surface modification for osseointegration of Ti6Al4V ELI using powder mixed sinking EDM, Journal of the Mechanical Behavior of Biomedical Materials, 2021
Modeling and Optimization Algorithms in Rapid Prototyping, Submerged Arc Welding, and Turning, Modeling and Optimization in Manufacturing: Toward Greener Production by Integrating Computer Simulation, 2021
Investigation on Mechanical, Tribological and Microstructural properties of Al-Mg-Si-T6/SiC/Muscovite-hybrid metal-matrix composites for high strength applications, Journal of Materials Research and Technology, 2021
Machine-learning for automatic prediction of flatness deviation considering the wear of the face mill teeth, Journal of Intelligent Manufacturing, 2021
Metrological analysis of surface quality aspects in minimum quantity cooling lubrication, Measurement, 2021
Energy, Environmental, Economic, and Technological Analysis of Al-GnP Nanofluid- and Cryogenic LN2-Assisted Sustainable Machining of Ti-6Al-4V Alloy, Metals, 2021
Performance Assessment of Minimum Quantity Castor-Palm Oil Mixtures in Hard-Milling Operation, Materials, 2021
Recent developments in fire retardant glass fibre reinforced epoxy composite and geopolymer as a potential fire-retardant material: A review, Construction and Building Materials, 2021
Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method, The International Journal of Advanced Manufacturing Technology, 2021
Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy, Tribology International, 2021
Investigation into the surface quality and stress corrosion cracking resistance of AISI 316L stainless steel via precision end-milling operation, The International Journal of Advanced Manufacturing Technology, 2021
The effects of through tool cryogenic machining on the hole quality in GLARE® fibre metal laminates, Journal of Manufacturing Processes, 2021
Investigation on the mechanical, tribological, morphological and machinability behavior of stir-casted Al/SiC/Mo reinforced MMCs, Journal of Materials Research and Technology, 2021
Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti–6Al–4V alloy, Tribology International, 2021
Episodes of chip formation in micro-to-nanoscale cutting of Inconel 625, International Journal of Mechanical Sciences, 2021
Influence of Feed Rate Response (FRR) on Chip Formation in Micro and Macro Machining of Al Alloy, Metals, 2021
Effects of calcium-treatment of a plastic injection mold steel on the tool wear and power consumption in slot milling, Journal of Materials Research and Technology, 2021
A hybrid approach of cooling lubrication for sustainable and optimized machining of Ni-based industrial alloy, Journal of Cleaner Production, 2021
Evaluation of machinability-based sustainability indicators in the eco-benign turning of Ti3Al2.5V alloy with textured tools, The International Journal of Advanced Manufacturing Technology, 2021
Effect of ball-milling process parameters on mechanical properties of Al/Al2O3/collagen powder composite using statistical approach, Journal of Materials Research and Technology, 2021
Parametric Optimization for Improving the Machining Process of Cu/Mo-SiCP Composites Produced by Powder Metallurgy, Materials, 2021
Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800, Journal of Cleaner Production, 2021
Sustainability Assessment, Investigations, and Modelling of Slot Milling Characteristics in Eco-Benign Machining of Hardened Steel, Metals, 2020
Mathematical modeling and intelligent optimization of submerged arc welding process parameters using hybrid PSO-GA evolutionary algorithms, Neural Computing and Applications, 2020
Influences of TiAlN coating and limiting angles of flutes on prediction of cutting forces and dynamic stability in micro milling of die steel (P-20), Journal of Materials Processing Technology, 2020
Investigations on Surface Roughness and Tool Wear Characteristics in Micro-Turning of Ti-6Al-4V Alloy, Materials, 2020
Chapter 10 - High speed machining of magnesium and its alloys, High Speed Machining, 2020
Six sigma optimization of multiple machining characteristics in hard turning under dry, flood, MQL and solid lubrication, Journal of Production Systems and Manufacturing Science, 2020
Influence of CO2-snow and subzero MQL on thermal aspects in the machining of Ti-6Al-4V, Applied Thermal Engineering, 2020
Wear behaviour of TiAlN coated solid carbide end-mill under alumina enriched minimum quantity palm oil-based lubricating condition, Tribology International, 2020
Application of hybrid nature-inspired algorithm: Single and bi-objective constrained optimization of magnetic abrasive finishing process parameters, Journal of Materials Research and Technology, 2020
Comprehensive analysis on orthopedic drilling: A state-of-the-art review, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2020
Manufacturing of Al Alloy Microrods by Micro Cutting in a Micromachining Center, Micromachines, 2020
Comprehensive Study on Tool Wear During Machining of Fiber-Reinforced Polymeric Composites, Composites Science and Technology, 2020
Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy, Journal of Cleaner Production, 2020
Influence of silicon carbide and porcelain on tribological performance of Al6061 based hybrid composites, Tribology International, 2020
Mechanical Strength Enhancement of 3D Printed Acrylonitrile Butadiene Styrene Polymer Components Using Neural Network Optimization Algorithm, Polymers, 2020
Evolution of tool flank wear and its influence on machining characteristics in pressurized-oil jet assisted hard turning, Journal of Production Systems and Manufacturing Science, 2020
Effects of Turning Parameters and Parametric Optimization of the Cutting Forces in Machining SiCp/Al 45 wt% Composite, Metals, 2020
Internal Cylindrical Grinding Process of INCONEL® Alloy 600 Using Grinding Wheels with Sol–Gel Alumina and a Synthetic Organosilicon Polymer-Based Impregnate, Micromachines, 2020
Impact of layer rotation on micro-structure, grain size, surface integrity and mechanical behaviour of SLM Al-Si-10Mg alloy, Journal of Materials Research and Technology, 2020
Investigation of the specific cutting energy and its effect in shearing dominant precision micro cutting, Journal of Materials Processing Technology, 2020
Synergistic effect of silica and pure palm oil on the machining performances of Inconel 690: A study for promoting minimum quantity nano doped-green lubricants, Journal of Cleaner Production, 2020
Modeling and performance evaluation of Al2O3, MoS2 and graphite nanoparticle-assisted MQL in turning titanium alloy: an intelligent approach, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020
Multi-Response Optimization of Electrical Discharge Drilling Process of SS304 for Energy Efficiency, Product Quality, and Productivity, Materials, 2020
Progress for sustainability in the mist assisted cooling techniques: a critical review, The International Journal of Advanced Manufacturing Technology, 2020
Cryogenic turning of in-house cast magnesium based MMCs: A comprehensive investigation, Journal of Materials Research and Technology, 2020
Sustainability-based performance evaluation of hybrid nanofluid assisted machining, Journal of Cleaner Production, 2020
Machinability investigations of hardened steel with biodegradable oil-based MQL spray system, The International Journal of Advanced Manufacturing Technology, 2020
Milling of Ti–6Al–4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining, The International Journal of Advanced Manufacturing Technology, 2020
State-Of-The-Art and Trends in CO2 Laser Cutting of Polymeric Materials—A Review, Materials, 2020
Artificial Intelligence-Based Hole Quality Prediction in Micro-Drilling Using Multiple Sensors, Sensors, 2020
Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4 V alloy, Sustainable Materials and Technologies, 2020
Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloy, Tribology International, 2020
Green machining for the dry milling process of stainless steel 304, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2020
High-Accuracy 3D Optical Profilometry for Analysis of Surface Condition of Modern Circulated Coins, Materials, 2020
Energy-Based Novel Quantifiable Sustainability Value Assessment Method for Machining Processes, Energies, 2020
Assessment of CVD- and PVD-Coated Carbides and PVD-Coated Cermet Inserts in the Optimization of Surface Roughness in Turning of AISI 1045 Steel, Materials, 2020
Influence of Variable Radius of Cutting Head Trajectory on Quality of Cutting Kerf in the Abrasive Water Jet Process for Soda–Lime Glass, Materials, 2020
Evaluating the sustainability pillars of energy and environment considering carbon emissions under machining ofTi-3Al-2.5 V, Sustainable Energy Technologies and Assessments, 2020
Sustainability-Based Optimization of the Rotary Turning of the Hardened Steel, Metals, 2020
Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel, Journal of Cleaner Production, 2020
Modeling, multi-objective optimization and cost estimation of bone drilling under micro-cooling spray technique: an integrated analysis, International Journal on Interactive Design and Manufacturing (IJIDeM), 2020
Taguchi S/N and TOPSIS Based Optimization of Fused Deposition Modelling and Vapor Finishing Process for Manufacturing of ABS Plastic Parts, Materials, 2020
Modeling and Evaluation of Energy Efficiency of New Hybrid Turning-Burnishing Process in Terms of Surface Properties, Energies, 2020
Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants, Tribology International, 2020
Influence of single and dual cryogenic jets on machinability characteristics in turning of Ti-6Al-4V, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2019
Multi-objective optimization of surface roughness, thrust force, and torque produced by novel drill geometries using Taguchi-based GRA, International Journal of Advanced Manufacturing Technology, 2019
Analysis of the Deviation in a Low-Cost System for Stepless Digital Control of Conventional Lathe Spindle Speeds, Applied Sciences, 2019
Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V, Journal of Cleaner Production, 2019
Optimization of hole quality produced by novel drill geometries using the Taguchi S/N approach, International Journal of Advanced Manufacturing Technology, 2019
Multi-objective parametric appraisal of pulsed current gas tungsten arc welding process by using hybrid optimization algorithms, International Journal of Advanced Manufacturing Technology, 2019
Influence of Different Grades of CBN Inserts on Cutting Force and Surface Roughness of AISI H13 Die Tool Steel during Hard Turning Operation, Materials, 2019
Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V, International Journal of Advanced Manufacturing Technology, 2019
Parametric optimization and process capability analysis for machining of nickel-based superalloy, International Journal of Advanced Manufacturing Technology, 2019
Tribo-corrosion characterization of NiTiCu alloy for bio-implant applications, Materials Research Express, 2019
Effect of the Relative Position of the Face Milling Tool towards the Workpiece on Machined Surface Roughness and Milling Dynamics, Applied Sciences, 2019
Multi-Response Optimization of Face Milling Performance Considering Tool Path Strategies in Machining of Al-2024, Materials, 2019
Evaluation of Copper-Based Alloy (C93200) Composites Reinforced with Marble Dust Developed by Stir Casting under Vacuum Environment, Materials, 2019
Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool, International Journal of Advanced Manufacturing Technology, 2019
Optimization of Power Consumption Associated with Surface Roughness in Ultrasonic Assisted Turning of Nimonic-90 Using Hybrid Particle Swarm-Simplex Method, Materials, 2019
Intelligent Optimization of Hard-Turning Parameters Using Evolutionary Algorithms for Smart Manufacturing, Materials, 2019
Obtaining Various Shapes of Machined Surface Using a Tool with a Multi-Insert Cutting Edge, Applied Sciences, 2019
Maximization of Sewing Line Production Using Taguchi Signal-to-Noise Method, International Scientific Conference on Sustainability of Global Garment Industry, 2019
Experimental Studies on MoS2-Treated Grinding Wheel Active Surface Condition after High-Efficiency Internal Cylindrical Grinding Process of INCONEL® Alloy 718, Micromachines, 2019
Influence of Al 2 O 3 and palm oil–mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules–based FIS model in eco-benign milling, International Journal of Advanced Manufacturing Technology, 2019
Investigations of surface integrity, bio-activity and performance characteristics during wire-electrical discharge machining of Ti-6Al-7Nb biomedical alloy, Materials Research Express, 2019
Mathematical modeling and intelligent optimization of submerged arc welding process parameters using hybrid PSO-GA evolutionary algorithms, Neural Computing and Applications, 2019
Multi-objective optimization for MQL-assisted end milling operation: an intelligent hybrid strategy combining GEP and NTOPSIS, Neural Computing and Applications, 2019
Sustainability assessment associated with surface roughness and power consumption characteristics in nanofluid MQL-assisted turning of AISI 1045 steel, International Journal of Advanced Manufacturing Technology, 2019
Carbide tool life prediction and modeling in SiCp/Al turning process via artificial neural network approach, IOP Conference Series: Materials Science and Engineering, 2019
Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts, International Journal of Advanced Manufacturing Technology, 2019
Ecological trends in machining as a key factor in sustainable production–a review, Journal of Cleaner Production, 2019
Machinability improvement in Inconel-718 by enhanced tribological and thermal environment using textured tool, Journal of Thermal Analysis and Calorimetry, 2019
Multi-Objective Optimization of Energy Consumption and Surface Quality in Nanofluid SQCL Assisted Face Milling, Energies, 2019
Internal Cracks and Non-Metallic Inclusions as Root Causes of Casting Failure in Sugar Mill Roller Shafts, Materials, 2019
GEP- and ANN-based tool wear monitoring: a virtually sensing predictive platform for MQL-assisted milling of Inconel 690, International Journal of Advanced Manufacturing Technology, 2019
Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool, International Journal of Advanced Manufacturing Technology, 2019
GEP- and ANN-based tool wear monitoring: a virtually sensing predictive platform for MQL-assisted milling of Inconel 690, International Journal of Advanced Manufacturing Technology, 2019
Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy, Materials, 2019
Evaluation of machinability and economic performance in cryogenic-assisted hard turning of α-β titanium: a step towards sustainable manufacturing, Machining Science and Technology, 2019
Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing, International Journal of Precision Engineering and Manufacturing-Green Technology, 2019
Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms, Materials, 2019
Selection of an ideal MQL-assisted milling condition: an NSGA-II-coupled TOPSIS approach for improving machinability of Inconel 690, International Journal of Advanced Manufacturing Technology, 2019
Evaluating the effect of micro-lubrication in orthopedic drilling, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 2019
Improvement of tribological behavior of H-13 steel by optimizing the cryogenic-treatment process using evolutionary algorithms, Tribology International, 2019
Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy, Journal of Materials Processing Technology, 2018
Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy, International Journal of Advanced Manufacturing Technology, 2018
Machinability Investigations of Inconel-800 Super Alloy under Sustainable Cooling Conditions, Materials, 2018
Modeling flatness deviation in face milling considering angular movement of the machine tool system components and tool flank wear, Precision Engineering, 2018
Synthesis, Characterization, Corrosion Resistance and In-Vitro Bioactivity Behavior of Biodegradable Mg–Zn–Mn–(Si–HA) Composite for Orthopaedic Applications, Materials, 2018
Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning, Measurement, 2018
Prediction and optimization of surface roughness in minimum quantity coolant lubrication applied turning of high hardness steel, Measurement, 2018
Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition, Measurement, 2018
Modeling and optimization of tool wear in MQL-assisted milling of Inconel 718 superalloy using evolutionary techniques, The International Journal of Advanced Manufacturing Technology, 2018
Mathematical modeling and optimization of MQL assisted end milling characteristics based on RSM and Taguchi method, Measurement, 2018
Influence of Ranque-Hilsch vortex tube and nitrogen gas assisted MQL in precision turning of Al 6061-T6, Precision Engineering, 2018
An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions, Journal of Cleaner Production, 2018
Modeling of Surface Roughness Using RSM, FL and SA in Dry Hard Turning, Arabian Journal for Science and Engineering, 2018
Multi-Objective Optimization for Grinding of AISI D2 Steel with Al2O3 Wheel under MQL, Materials, 2018
Multi-response optimization of end milling parameters under through-tool cryogenic cooling condition, Measurement, 2017
Optimization of Surface Roughness and Cutting Temperature in High-Pressure Coolant-Assisted Hard Turning using Taguchi Method, International Journal of Advanced Manufacturing Technology, 2017
Optimization of MQL flow rate for minimum cutting force and surface roughness in end milling of hardened steel (HRC 40), International Journal of Advanced Manufacturing Technology, 2017
High pressure coolant on flank and rake surfaces of tool in turning of Ti-6Al-4V: Investigations on forces, temperature and chips, International Journal of Advanced Manufacturing Technology, 2017
High-pressure coolant on flank and rake surfaces of tool in turning of Ti-6Al-4V: investigations on surface roughness and tool wear, International Journal of Advanced Manufacturing Technology, 2017
Mono-objective and multi-objective optimization of performance parameters in high pressure coolant assisted turning of Ti-6Al-4V, International Journal of Advanced Manufacturing Technology, 2017
Effect of time-controlled MQL pulsing on surface roughness in hard turning by statistical analysis and artificial neural network, International Journal of Advanced Manufacturing Technology, 2017
Performance prediction of high-pressure coolant assisted turning of Ti-6Al-4V, The International Journal of Advanced Manufacturing Technology, 2017
Effects of internal cooling by cryogenic on the machinability of hardened steel, The International Journal of Advanced Manufacturing Technology, 2017
Prediction and optimization by using SVR, RSM and GA in hard turning of tempered AISI 1060 steel under effective cooling condition, Neural Computing and Applications, 2017
Energy Harvest from Water Wave–Bangladesh Prospect, Journal of Thermal Energy Systems, 2017
Study of surface roughness and cutting forces using ANN, RSM, and ANOVA in turning of Ti-6Al-4V under cryogenic jets applied at flank and rake faces of coated WC tool, The International Journal of Advanced Manufacturing Technology, 2017
Prediction of surface roughness in hard turning under high pressure coolant using Artificial Neural Network, Measurement, 2016
Effects of cutting parameters and machining environments on surface roughness in hard turning using design of experiment, International Conference on Mechanical Engineering, 2016
Response surface and neural network based predictive models of cutting temperature in hard turning, Journal of Advanced Research, 2016
Investigations on surface milling of hardened AISI 4140 steel with pulse jet MQL applicator, Journal of the Institution of Engineers (India): Series C, 2016
Modeling of Principal Flank Wear: An Empirical Approach Combining the Effect of Tool, Environment and Workpiece Hardness, Journal of The Institution of Engineers (India): Series C, 2016
Effects of Cutting Parameters and Flow Rate on Cutting Force and Surface Roughness in Surface Milling of Hardened AISI 4140 Steel, International Conference on Mechanical Engineering, 2015
Effect of Pulse Jet MQL in Surface Milling of Hardened Steel, Journal of Mechanical Engineering, 2015
Effect of high pressure coolant jet on cutting temperature, tool wear and surface finish in turning hardened (HRC 48) steel, Journal of Mechanical Engineering, 2015
Improvement of Productivity in Ready Made Garment Through Line Balancing, Journal of Textile Engineering, 2015

Ahsanullah University of Science and Technology

Faculty of Engineering

Department of Mechanical and Production Engineering

Ahsanullah University of Science and Technology

141 & 142, Love Road, Tejgaon Industrial Area, Dhaka-1208

Tel. (8802) 8870422, Ext. 107, 114, Fax : (8802) 8870418

Email: info@aust.edu, regr@aust.edu

Contact Credits