Department of
| Title | Type | Journal Name | Year | Author | URL |
|---|---|---|---|---|---|
| [Under Review] Design, Experimental and Numerical Analysis of a Two Buoy Floating Wave Energy Convertor | Journal Article | Ocean Engineering | 2024 | Mr. Inzamam Ul Haq | |
| Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications | Journal Article | AIP Advances | 2024 | Mr. Rezaul Karim Nayeem | Paper Link |
| Mechanical characterization of mulberry silk reinforced hybrid composite for enhanced application | Journal Article | Results in Materials | 2024 | Mr. Rezaul Karim Nayeem | Paper Link |
| Surface roughness and cutting force in turning of alkaline-treated banana fibre-reinforced polymer composite: Compressed air cutting | Journal Article | Journal of Reinforced Plastics and Composites | 2024 | Mr. Rezaul Karim Nayeem | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Mr. Rezaul Karim Nayeem | Paper Link |
| Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications | Journal Article | AIP Advances | 2024 | Mr. Shah Md. Ashiquzzaman Nipu | |
| A new approach to inventory classification using a multi-criteria decision-making method to increase business efficiency | Journal Article | Int. J. Management Concepts and Philosophy | 2024 | Mr. Shah Md. Ashiquzzaman Nipu | |
| Additive manufacturing-based composites for sensors and other applications | Book | Materials Science and Materials Engineering | 2024 | Mr. Shah Md. Ashiquzzaman Nipu | Paper Link |
| Nanomaterials for sensors and other applications | Book | Comprehensive Materials Processing (Second Edition) | 2024 | Mr. Zahid Hasan Shuvo | Paper Link |
| Applications of biocomposites—Tissue engineering and regenerative medicine | Book | Comprehensive Materials Processing (Second Edition) | 2024 | Mr. Zahid Hasan Shuvo | Paper Link |
| Additive manufacturing-based composites for sensors and other applications | Book | Comprehensive Materials Processing (Second Edition) | 2024 | Mr. Zahid Hasan Shuvo | Paper Link |
| Numerical Analysis of Different Passive Microfluidic Channels for Enhanced Fluid Transportation | Journal Article | JOURNAL OF ENGINEERING AND TECHNOLOGY (JET) | 2024 | Mr. Aquib Rahman | Paper Link |
| Extraction of Cellulosic Compound from Jackfruit Peel Waste and Characterization of PVA Cellulose Composite as Biodegradable Film | Journal Article | Journal of Engineering | 2024 | Mr. Aquib Rahman | Paper Link |
| Mechanical, Thermal and Morphological Characterization of Graphene/Al2O3-Reinforced Epoxy Hybrid Nanocomposites | Journal Article | Macromolecular Materials and Engineering | 2024 | Mr. Shadman Sharar Alam | Paper Link |
| Extraction of Cellulosic Compound from Jackfruit Peel Waste and Characterization of PVA Cellulose Composite as Biodegradable Film | Journal Article | Journal of Engineering | 2024 | Mr. Shadman Sharar Alam | Paper Link |
| Disruptive supply chain technology assessment for sustainability journey: A framework of probabilistic group decision making | Journal Article | Heliyon | 2024 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Municipal solid waste management: Identification and analysis of technology selection criteria using Fuzzy Delphi and Fuzzy DEMATEL technique | Journal Article | Heliyon | 2024 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Mr. Rafat Rahman | Paper Link |
| Embracing Sustainability in Green Supplier Evaluation: A Novel Integrated Multi-Criteria Decision-Making Framework | Journal Article | Contemporary Mathematics | 2024 | Mr. Rafat Rahman | Paper Link |
| Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications | Journal Article | AIP Advances | 2024 | Mr. Sheak Salman | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Mr. Sheak Salman | Paper Link |
| The pathways to lean manufacturing for circular economy: Implications for sustainable development goals | Journal Article | Journal of Responsible Production and Consumption | 2024 | Mr. Sheak Salman | Paper Link |
| Stacking Sequence and Weight Fraction Effect on Tensile and Flexural Properties of Woven Jute and Woven Carbon-Jute Reinforced Polyester Composites | Conference Proceedings | Materials Science and Engineering | 2024 | Mr. Golam Fahim | Paper Link |
| Recent trends in the customization of sensor materials for biomedical applications | Book | Elsevier Reference Collection in Materials Science and Materials Engineering | 2024 | Mr. Golam Fahim | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceuticals industry: a Bayesian best worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Ms. Sadia Hasanat | |
| A pythagorean fuzzy approach to evaluate the challenges to implementing circular economy in the glass manufacturing industry: Implications for sustainable development | Journal Article | Results in Engineering | 2024 | Ms. Afia Ahsan | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Ms. Afia Ahsan | Paper Link |
| "A review of existing research works on ball burnishing based on tools and work materials" | Journal Article | Journal of Engineering and Technology (JET) | 2024 | Mr. Ashraf Siddiquee Ashrafee | Paper Link |
| Integrating Supply Chain Partners through Implementing Industry 4.0 Technologies to Enhance Competitiveness | Journal Article | Jordan Journal of Mechanical and Industrial Engineering | 2024 | Mr. Rafid Ahmed Chowdhury | Paper Link |
| Mechanical property enhancement of graphene-kenaf-epoxy multiphase composites for automotive applications | Journal Article | Composites Part A: Applied Science and Manufacturing | 2024 | Mr. Chowdhury Ahmed Shahed | Paper Link |
| Mechanical Investigation of Kenaf/Carbon Hybrid Composites for Building and Construction Applications | Journal Article | Journal of Composites for Construction | 2024 | Mr. Chowdhury Ahmed Shahed | |
| Thermo-mechanical performance of wolframite mineral reinforced siloxane-modified epoxy-based intumescent coating for structural steel | Journal Article | Polymers for Advanced Technologies | 2024 | Mr. Chowdhury Ahmed Shahed | |
| Recycling of Plastic Polymer: Reinforcement of Building Material Using Polymer Plastics of Used COVID-19 Syringes | Journal Article | Advances in Sustainable Building Materials and Construction | 2023 | Prof. Dr. Mohammad Sarwar Morshed | |
| Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Mr. Rezaul Karim Nayeem | Paper Link |
| Assessing the barriers to lean manufacturing adoption in the furniture industry of Bangladesh: a fuzzy-DEMATEL study | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Rezaul Karim Nayeem | Paper Link |
| A decision support system for classifying supplier selection criteria using machine learning and random forest approach | Journal Article | Decision Analytics Journal | 2023 | Mr. Shah Md. Ashiquzzaman Nipu | |
| Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Mr. Shah Md. Ashiquzzaman Nipu | |
| An Experimental Investigation for Multi-objective Optimization of Turning Parameters on Graphene/Al2O3 Reinforced Polymer Hybrid Nanocomposite using RSM Combined with GRA | Conference Proceedings | 14th International Conference on Mechanical Engineering December 18-19, 2023 | 2023 | Mr. Shah Md. Ashiquzzaman Nipu | |
| Progress in recovery, recycling and reuse of polymers, biopolymers and their composites | Book | Comprehensive Materials Processing (Second Edition) | 2023 | Mr. Zahid Hasan Shuvo | Paper Link |
| Prediction & Cutting Parameter Optimization for Surface Roughness of Laser Machining of SS-304 Using Taguchi Method | Journal Article | Research and Reviews: Journal of Mechanics and Machines | 2023 | Mr. Zahid Hasan Shuvo | |
| Experimental Investigation on the Effects of Different Oil-based MQL on the Surface Roughness of Aluminum 6061 Alloy | Journal Article | Research and Reviews: Journal of Mechanics and Machines | 2023 | Mr. Zahid Hasan Shuvo | |
| Composite materials from synthetic and natural sources: Fabrication techniques and applications | Book | Comprehensive Materials Processing (Second Edition) | 2023 | Mr. Zahid Hasan Shuvo | Paper Link |
| Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Ms. Mahjabin Moon | Paper Link |
| Prediction & Cutting Parameter Optimization for Surface Roughness of Laser Machining of SS-304 Using Taguchi Method | Journal Article | Research and Reviews: Journal of Mechanics and Machines | 2023 | Mr. Aquib Rahman | |
| Review of developments in sensor technology for monitoring of health-related conditions | Book | Comprehensive Materials Processing | 2023 | Mr. Aquib Rahman | Paper Link |
| Investigation of the effect of vibration in the multi-objective optimization of dry turning of hardened steel | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Aquib Rahman | Paper Link |
| Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Mr. Aquib Rahman | Paper Link |
| Review of Recent Developments in processing and application of Aluminium Matrix Composites with Alumina particles | Book | Comprehensive Materials Processing | 2023 | Mr. Aquib Rahman | Paper Link |
| Review of the current issues of connectivity, durability and reliability of sensors & their solutions | Book | Comprehensive Materials Processing | 2023 | Mr. Aquib Rahman | Paper Link |
| FABRICATION & MECHANICAL CHARACTERIZATION OF JUTE, COIR AND BANANA FIBER-REINFORCED HYBRID EPOXY COMPOSITE | Journal Article | Journal of Mechanical Engineering | 2023 | Mr. Shadman Sharar Alam | Paper Link |
| Drivers for Internet of Things (IoT) adoption in supply chains: Implications for sustainability in the post-pandemic era | Journal Article | Computers and Industrial Engineering | 2023 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Behavioural factors for Industry 4.0 adoption: implications for knowledge-based supply chains | Journal Article | Operations Management Research | 2023 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| An integrated approach to explore the barriers to lean manufacturing in the context of the COVID-19 pandemic: implications for sustainability | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Critical success factors for circular economy in the waste electrical and electronic equipment (WEEE) sector in an emerging economy: Implications for stakeholders | Journal Article | Journal of Cleaner Production | 2023 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Investigation of the effect of vibration in the multi-objective optimization of dry turning of hardened steel | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| Review of new developments in different types of sensors over the past 15 years | Book | Materials Science and Materials Engineering | 2023 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| Review of the current issues of connectivity, durability and reliability of sensors and their soluti | Book | Materials Science and Materials Engineering | 2023 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| Review of the developments in composite materials over the last 15 years | Book | Comprehensive Materials Processing | 2023 | Mr. A K M Sarower Kabir | Paper Link |
| Review of New Developments in Different Types of Sensors Over the Past 15 Years | Others | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Developments in Coatings technologies for optical fibre sensors | Book | Comprehensive Materials Processing, 2nd Edition. | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Review of Developments in Sensor Technology For Monitoring of Health-Related Conditions | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Review of The Current Issues of Connectivity, Durability and Reliability of Sensors and Their Solutions | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Review of the Developments in Composite Materials Over the Last 15 Years | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Review of Recent Developments in processing and application of Aluminium Matrix Composites with Alumina particles | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Critical success factors for circular economy in the waste electrical and electronic equipment (WEEE) sector in an emerging economy: Implications for stakeholders | Journal Article | Journal of Cleaner Production | 2023 | Ms. Prattusha Bhattacharjee | Paper Link |
| Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Rafat Rahman | Paper Link |
| Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Sheak Salman | |
| Assessing the barriers to lean manufacturing adoption in the furniture industry of Bangladesh: a fuzzy-DEMATEL study | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Sheak Salman | Paper Link |
| An integrated approach to explore the barriers to lean manufacturing in the context of the COVID-19 pandemic: Implications for sustainability | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Sheak Salman | Paper Link |
| Municipal solid waste management: Identification and analysis of technology selection criteria using Fuzzy Delphi and Fuzzy DEMATEL technique | Journal Article | Heliyon | 2023 | Mr. Sheak Salman | Paper Link |
| Recycling of Plastic Polymer: Reinforcement of Building Material Using Polymer Plastics of Used COVID-19 Syringes | Journal Article | MDPI | 2023 | Mr. Golam Fahim | Paper Link |
| Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Ms. Sadia Hasanat | |
| Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys: A review | Journal Article | Journal of Magnesium and Alloys | 2023 | Mr. Chowdhury Ahmed Shahed | Paper Link |
| Interface and mechanical properties of graphene/copper composite with sonication induced Au decoration of graphene | Journal Article | Powder Technology | 2023 | Mr. Chowdhury Ahmed Shahed | |
| STUDY AND ANALYSIS OF METAL PARTS FABRICATED THROUGH FUSED DEPOSITION MODELLING, DE-BINDING AND SINTERING PROCESSES | Journal Article | Journal of Engineering Science and Technology | 2023 | Mr. Chowdhury Ahmed Shahed | |
| Microstructure and mechanical performance of low-cost biomedical-grade Titanium-316L alloy | Journal Article | Journal of Materials Research and Technology | 2023 | Mr. Chowdhury Ahmed Shahed | |
| Influence of Drilling Parameters on the Delamination and Surface Roughness of Insulative-Coated Glass/Carbon-Hybrid Composite | Journal Article | Advances in Polymer Technology | 2023 | Mr. Chowdhury Ahmed Shahed | |
| Review of the developments in composite materials over the last 15 years | Others | 2023 | Mr. Chowdhury Ahmed Shahed | Paper Link | |
| INVENTORY MANAGEMENT OF READYMADE GARMENT INDUSTRIES | Journal Article | Journal of Mechanical Engineering | 2022 | Prof. Dr. Mohammad Sarwar Morshed | |
| Barriers to achieving sustainability in pharmaceutical supply chains in the post-COVID-19 era | Journal Article | International Journal of Emerging Markets | 2022 | Prof. Dr. Mohammad Sarwar Morshed | Paper Link |
| Sustainable supply chain in emerging economies during and post COVID-19 pandemic: a systematic literature review and future research directions | Journal Article | International Journal of Emerging Markets | 2022 | Mr. Sayem Ahmed | Paper Link |
| Multi-objective multi-echelon distribution planning for perishable goods supply chain: a case study | Journal Article | International Journal of Systems Science: Operations & Logistics | 2022 | Mr. Sayem Ahmed | Paper Link |
| Reducing plastic pollutants through catalyzing consumer roles: A novel application of fuzzy total interpretive structural modeling | Journal Article | Journal of Cleaner Production | 2022 | Mr. Sayem Ahmed | Paper Link |
| Sustainable supply chain in emerging economies during and post COVID-19 pandemic: A systematic literature review and future research directions | Journal Article | International Journal of Emerging Markets | 2022 | Ms. Humaira Nafisa Ahmed | Paper Link |
| Reducing plastic pollutants through catalyzing consumer roles: A novel application of fuzzy total interpretive structural modeling | Journal Article | Journal of Cleaner Production | 2022 | Ms. Humaira Nafisa Ahmed | Paper Link |
| Effects of Minimum Quantity Lubrication (MQL) on Surface Roughness in Milling Al Alloy 383 / ADC 12 Using Nano Hybrid Cutting Fluid | Journal Article | EVERGREEN - Joint Journal of Novel Carbon Sciences and Green Asia Strategy | 2022 | Mr. Md. Sazzad Hossain Ador | Paper Link |
| MACHINING PARAMETERS OPTIMIZATION FOR TURNING OPERATION FOR AL ALLOY 4343 ON VERTICAL CNC MILLING MACHINE USING TAGUCHI ANALYSIS AND GENETIC ALGORITHM | Journal Article | Journal of Mechanical Engineering | 2022 | Mr. Zahid Hasan Shuvo | |
| Optimization of Turning Parameters to Improve Surface Roughness and Material Removal Rate of AA 7XXX: A Taguchi Approach | Journal Article | Recent Trends in Production Engineering | 2022 | Mr. Zahid Hasan Shuvo | |
| Influence of alkalisation and eggshell particles on mechanical, thermal and physical properties of rattan-bamboo fibre reinforced hybrid polyester laminated composite | Journal Article | Advances in Materials and Processing Technologies | 2022 | Mr. Shadman Sharar Alam | Paper Link |
| Barriers to achieving sustainability in pharmaceutical supply chains in the post-COVID-19 era | Journal Article | International Journal of Emerging Markets | 2022 | Ms. Sharmine Akther Liza | Paper Link |
| Barriers to achieving sustainability in pharmaceutical supply chains in the post-COVID-19 era | Journal Article | International Journal of Emerging Markets | 2022 | Mr. Naimur Rahman Chowdhury | Paper Link |
| Improving the Benefits and Cost of Using Emerging Technologies for Sustainable Recovery from COVID-19 in Manufacturing Industries | Journal Article | Frontiers in Environmental Science | 2022 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| What are the challenges that make the journey towards industrial symbiosis complicated? | Journal Article | Journal of Cleaner Production | 2022 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Effects of Minimum Quantity Lubrication (MQL) on Surface Roughness in Milling Al Alloy 383 / ADC 12 Using Nano Hybrid Cutting Fluid | Journal Article | EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy | 2022 | Mr. A K M Sarower Kabir | |
| Synergistic effects of tubular halloysite clay and zirconium phosphate on thermal behavior of intumescent coating for structural steel | Journal Article | Journal of Materials Research and Technology | 2022 | Mr. A K M Sarower Kabir | Paper Link |
| What are the challenges that make the journey towards industrial symbiosis complicated? | Journal Article | Journal of Cleaner Production | 2022 | Ms. Prattusha Bhattacharjee | Paper Link |
| Barriers to achieving sustainability in pharmaceutical supply chains in the post-COVID-19 era | Journal Article | International Journal of Emerging Markets | 2022 | Mr. Shah Murtoza Morshed | Paper Link |
| Improving the Benefits and Cost of Using Emerging Technologies for Sustainable Recovery from COVID-19 in Manufacturing Industries | Journal Article | Frontiers in Environmental Science, section Environmental Economics and Management | 2022 | Mr. Sheak Salman | Paper Link |
| Behavioural factors for Industry 4.0 adoption: implications for knowledge-based supply chains | Journal Article | Operations Management Research | 2022 | Mr. Sheak Salman | Paper Link |
| What are the challenges that make the journey towards Industrial Symbiosis complicated? | Journal Article | Journal of Cleaner Production | 2022 | Mr. Sheak Salman | Paper Link |
| An Incineration Method to Produce Energy from Waste in Rajshahi City, Bangladesh | Conference Proceedings | International Conference in Industrial and Mechanical Engineering and Operations Management (IMEOM) | 2022 | Mr. Ahtashamul Haque | Paper Link |
| Analyzing Musculoskeletal Disorders in Farmers Involved in Cultivation of Rice in Selected Villages of Bangladesh | Conference Proceedings | 5th International Conference in Industrial and Mechanical Engineering and Operations Management (IMEOM) | 2022 | Mr. Rafid Ahmed Chowdhury | Paper Link |
| Preparation and Characterization of leather Buffing Dust Filled Thermoplastic Composite | Journal Article | Journal of Mechanical Engineering | 2021 | Prof. Dr. Mohammad Sarwar Morshed | |
| Intelligent Vehicle Scheduling and Routing for a Chain of Retail Stores: A case study of Dhaka, Bangladesh | Journal Article | Logistics | 2021 | Prof. Dr. Mohammad Sarwar Morshed | Paper Link |
| Occupational safety and health and productivity in the garment industry – contradictory or complementary? | Book | 2021 | Prof. Dr. Mohammad Sarwar Morshed | ||
| Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool | Journal Article | Sustainability | 2021 | Mr. Rezaul Karim Nayeem | Paper Link |
| Investigation of Surface Roughness in MQL Aided Turning of AlCuZr Alloy using PCD Tool | Conference Proceedings | Intelligent Manufacturing and Energy Sustainability | 2021 | Mr. Rezaul Karim Nayeem | Paper Link |
| Challenges to COVID-19 vaccine supply chain: Implications for sustainable development goals | Journal Article | International Journal of Production Economics | 2021 | Mr. Sayem Ahmed | Paper Link |
| Addressing critical success factors for improving concurrent emergency management: lessons learned from the COVID-19 pandemic | Journal Article | Annals of Operations Research | 2021 | Mr. Sayem Ahmed | Paper Link |
| Evaluation of Flexible Strategies to Manage the COVID-19 Pandemic in the Education Sector | Journal Article | Global Journal of Flexible Systems Management | 2021 | Mr. Sayem Ahmed | Paper Link |
| A supply chain disruption risk mitigation model to manage COVID-19 pandemic risk | Journal Article | Environmental Science and Pollution Research | 2021 | Mr. Kazi Safowan Shahed | Paper Link |
| A Taguchi Approached Comparative Study on Inventory Cost Optimization Considering Shortage and Backlogging Cost for Perishable Products | Journal Article | Journal of Advanced Research in Industrial Engineering | 2021 | Mr. Zahid Hasan Shuvo | |
| Combined Business Strategy in Coastal Area after Covid-19 Situation A Case Study in Cox’s Bazar | Journal Article | International Journal of Students’ Research in Technology & Management | 2021 | Mr. Zahid Hasan Shuvo | |
| Design and Development of Automatic Sieving Machine for Granular/Powder Materials | Journal Article | Recent Trends in Automation and Automobile Engineering | 2021 | Mr. Zahid Hasan Shuvo | |
| Optimization of Inventory Total Cost Equation Considering both Shortage and Backlogging Cost by Taguchi Analysis | Journal Article | Recent Trends in Production Engineering | 2021 | Mr. Zahid Hasan Shuvo | |
| Comparative Analysis on the Effect of Minimum Quantity Lubrication and Chilled Air Cooling During Turning Hardened Stainless Steel | Book | Intelligent Manufacturing and Energy Sustainability | 2021 | Ms. Mahjabin Moon | |
| Examining risks and strategies for the spice processing supply chain in the context of an emerging economy | Journal Article | International Journal of Emerging Markets | 2021 | Mr. Kazi Wahadul Hasan | Paper Link |
| Integrated economic design of quality control and maintenance management: Implications for managing manufacturing process | Journal Article | International Journal of System Assurance Engineering and Management | 2021 | Mr. Kazi Wahadul Hasan | Paper Link |
| Application of nature inspired algorithms for multi-objective inventory control scenarios | Journal Article | International Journal of Industrial Engineering Computations | 2021 | Ms. Mahjabin Rahman | |
| Simulation on Mechanical Heart valve: Generative Design and Blood Flow Analysis of a Mechanical Heart Valve | Conference Proceedings | International Conference on Industrial & Mechanical Engineering and Operations Management | 2021 | Mr. Aquib Rahman | Paper Link |
| Effect of Different Fibers Loading on Palm and Aramid Fiber Reinforced Hybrid Epoxy Composite | Journal Article | Advances in Materials and Processing Technologies | 2021 | Mr. Shadman Sharar Alam | Paper Link |
| Assessing Performance and Improving Productivity Through Identification of Sewing Defects: A Multi Criteria Based Case Study in an Apparel Firm in Bangladesh | Conference Proceedings | In Proceedings of the 2nd South American International Conference on Industrial Engineering and Operations Management | 2021 | Ms. Sharmine Akther Liza | Paper Link |
| Recognizing Critical Drivers to Mitigate Supply Chain Disruptions in Pharmaceutical Industry During COVID-19 | Conference Proceedings | In Proceedings of the 2nd South American International Conference on Industrial Engineering and Operations Management | 2021 | Ms. Sharmine Akther Liza | Paper Link |
| Assessing Performance and Improving Productivity Through Identification of Sewing Defects: A Multi Criteria Based Case Study in an Apparel Firm in Bangladesh | Conference Proceedings | 2nd South American International Conference on Industrial Engineering and Operations ManagementAt: Sao Paulo, Brazil | 2021 | Mr. Naimur Rahman Chowdhury | |
| Recognizing Critical Drivers to Mitigate Supply Chain Disruptions in Pharmaceutical Industry During COVID-19 | Conference Proceedings | 2nd South American International Conference on Industrial Engineering and Operations ManagementAt: Sao Paulo, Brazil | 2021 | Mr. Naimur Rahman Chowdhury | |
| Assessing Disruptive Crises of Supply Chain in Firms Amidst COVID-19: An application of Multi Category-SVM using k-means Clustering | Conference Proceedings | 2nd South American International Conference on Industrial Engineering and Operations Management, Sao Paulo, BrazilAt: Brazil | 2021 | Mr. Naimur Rahman Chowdhury | |
| Evaluation of Flexible Strategies to Manage the COVID-19 Pandemic in the Education Sector | Journal Article | Global Journal of Flexible Systems Management | 2021 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Addressing critical success factors for improving concurrent emergency management: lessons learned from the COVID-19 pandemic | Journal Article | Annals of Operations Research | 2021 | Ms. Aliza Sharmin | Paper Link |
| Reducing plastic pollutants through catalyzing consumer roles: A novel application of fuzzy total interpretive structural modeling | Journal Article | Journal of Cleaner Production | 2021 | Ms. Aliza Sharmin | Paper Link |
| Effects of Waste Glass Powder Filler on Intumescent Coating for Steel Structures Application, IOP Conference Series: Materials Science and Engineering, Vol. 1176(1) 2021 | Journal Article | 2021 | Mr. A K M Sarower Kabir | Paper Link | |
| Analysis of Thermal Performance of Mica-Mineral Reinforced Intumescent Coating for Structural Steel Application, Transdisciplinary Research and Education Center for Green Technologies, Kyushu University, 2021 | Journal Article | 2021 | Mr. A K M Sarower Kabir | Paper Link | |
| Fire-Resistant Properties of Modified Epoxy Based Intumescent Fire-Retardant Coating: Hybridizing of Oyster Shell Powder with Glass Frit, IOP Conference Series: Materials Science and Engineering, Vo. 1176 (1), 2021 | Journal Article | 2021 | Mr. A K M Sarower Kabir | Paper Link | |
| Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool | Journal Article | Sustainability | 2021 | Mr. Shah Murtoza Morshed | Paper Link |
| Investigation of Surface Roughness in MQL Aided Turning of Al/Cu/Zr Alloy Using PCD Tool | Book | Intelligent Manufacturing and Energy Sustainability: Proceedings of ICIMES 2020 | 2021 | Mr. Shah Murtoza Morshed | Paper Link |
| Evaluation of Flexible Strategies to Manage the COVID-19 Pandemic in the Education Sector. | Journal Article | Global Journal of Flexible Systems Management | 2021 | Mr. Mohiuddin Sarker | Paper Link |
| Reducing plastic pollutants through catalyzing consumer roles: A novel application of fuzzy total interpretive structural modeling | Journal Article | Journal of Cleaner Production | 2021 | Mr. Rafat Rahman | Paper Link |
| Parametric Optimization in Powder-Mixed Electric Discharge Machining of Titanium Alloy | Conference Proceedings | Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021) 12 – 14 December 2021, Chattogram, Bangladesh | 2021 | Mr. Sheak Salman | |
| Investigation of Surface Roughness in MQL Aided Turning of Al/Cu/Zr Alloy using PCD Tool | Conference Proceedings | Springer Link | 2021 | Mr. Md. Sabbir Hossain Shawon | Paper Link |
| Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool | Journal Article | Sustainability - MDPI | 2021 | Mr. Md. Sabbir Hossain Shawon | Paper Link |
| Inventory Management of Readymade Garment Industries | Journal Article | JOURNAL OF MECHANICAL ENGINEERING | 2021 | Ms. Afia Ahsan | |
| Analyzing Musculoskeletal Discomforts of the Selected Bangladeshi University Students Using Laptops | Conference Proceedings | Proceedings of the International Conference on Industrial & Mechanical Engineering and Operations Management (IMEOM 2021); Held: December 26-27, 2021, Dhaka, Bangladesh | 2021 | Mr. Qawsar Ali | Paper Link |
| A Relative Comparison Between Transmission Dynamic and Exponential Growth Model of Covid19 In SAARC Affiliated Countries | Conference Proceedings | 6th International Conference On Engineering Research, Innovation and Education (ICERIE 2021) Held: 26-28 February 2021, Sylhet, Bangladesh | 2021 | Mr. Qawsar Ali | |
| Prioritizing Suppliers by using AHP tool for managing risk factors in Logistics | Conference Proceedings | 1st International Conference on Industrial and Mechanical Engineering and Operations Management | 2020 | Prof. Dr. Mohammad Sarwar Morshed | |
| Methodology for Baseline and Intervention Study - Project: Productivity and occupational health and safety in the garment industry in Bangladesh (POHS-BD) | Book | 2020 | Prof. Dr. Mohammad Sarwar Morshed | ||
| Study of Surface Roughness and MRR in Turning of SiC Reinforced Al Alloy Composite Using Taguchi Design Method, ANN and PCA Approach under MQL Cutting Condition | Book | Advanced Materials Research | 2020 | Mr. Rezaul Karim Nayeem | |
| Improving supply chain sustainability in the context of COVID-19 pandemic in an emerging economy: Exploring drivers using an integrated model | Journal Article | Sustainable Production and Consumption | 2020 | Mr. Sayem Ahmed | Paper Link |
| Critical success factors for implementing green supply chain management in the electronics industry: an emerging economy case | Journal Article | International Journal of Logistics Research and Applications | 2020 | Mr. Sayem Ahmed | Paper Link |
| Comparative Analysis of Fuzzy-AHP and TOPSIS Approach for Supplier Evaluation in a Cement Manufacturing Company | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Sayem Ahmed | Paper Link |
| Comparison of Fuzzy-AHP and AHP Approach for Supplier Evaluation and Selection in a Cement Manufacturing Company | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Sayem Ahmed | Paper Link |
| Strategies to Manage the Impacts of the COVID-19 Pandemic in the Supply Chain: Implications for Improving Economic and Social Sustainability | Journal Article | Sustainability | 2020 | Ms. Humaira Nafisa Ahmed | Paper Link |
| Comparison of Fuzzy-AHP and AHP Approach for Supplier Evaluation Selection in a Cement Manufacturing Company | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Md. Sazzad Hossain Ador | |
| Multi-Objective Mixed Model Assembly Line Balancing Using Mixed Integer Linear Programming | Journal Article | American Journal of Industrial Engineering | 2020 | Mr. Md. Sazzad Hossain Ador | |
| Comparative Analysis of Fuzzy-AHP and TOPSIS Approach for Supplier Evaluation in a Cement Manufacturing Company | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Md. Sazzad Hossain Ador | |
| Partner Selection for Multi-Echelon Supply Chain Using Artificial Bee Colony Algorithm | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Md. Sazzad Hossain Ador | |
| A Comparative Analysis of Inventory Cost Equation Considering Shortage and Backlogging Cost | Journal Article | Recent Trends in Production Engineering | 2020 | Mr. Zahid Hasan Shuvo | |
| Impact of nozzle design on grinding temperature of hardened steel under MQL condition | Conference Proceedings | Materials Today: Proceedings | 2020 | Ms. Mahjabin Moon | |
| Modeling drivers to big data analytics in supply chains | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Mr. Kazi Wahadul Hasan | Paper Link |
| Contextual relationships among key factors related to environmental sustainability: evidence from an emerging economy | Journal Article | Sustainable Production and Consumption | 2020 | Mr. Kazi Wahadul Hasan | Paper Link |
| Physico-mechanical properties investigation of sponge-gourd and betel nut reinforced hybrid polyester composites | Journal Article | Advances in Materials and Processing Technologies | 2020 | Mr. Shadman Sharar Alam | Paper Link |
| An Experimental Study of Physical, Mechanical, and Thermal Properties of Rattan-Bamboo Fiber Reinforced Hybrid Polyester Laminated Composite | Journal Article | Journal of Natural Fibers | 2020 | Mr. Shadman Sharar Alam | Paper Link |
| Strategies to Manage the Impacts of the COVID-19 Pandemic in the Supply Chain: Implications for Improving Economic and Social Sustainability | Journal Article | Sustainability | 2020 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Critical success factors for implementing green supply chain management in the electronics industry: an emerging economy case | Journal Article | International Journal of Logistics Research and Applications | 2020 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Effect of Heat Resistant Coating on the Drilled Hole Quality of Hybrid Fiber Reinforced Epoxy Composite, Strain (2020): 530- 537. | Journal Article | 2020 | Mr. A K M Sarower Kabir | ||
| Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment | Journal Article | International Journal of Advanced Manufacturing Technology | 2020 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Optimum Utilisation of CuO Nanofluid in Flat Plate Solar Collector | Journal Article | International Journal of Automotive and Mechanical Engineering | 2020 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Encyclopedia of Renewable and Sustainable Materials (vol. 1 - 5) | Book | Encyclopedia of Renewable and Sustainable Materials 2020 | 2020 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| An Efficient Ant Colony Algorithm for Multi-Depot Heterogeneous Fleet Green Vehicle Routing Problem | Conference Proceedings | 5th NA International Conference on Industrial Engineering and Operations Management Detroit, Michigan, USA, August 10 - 14, 2020 | 2020 | Ms. Prattusha Bhattacharjee | Paper Link |
| Enhancement of Supply Chain Performance by Data Analytics | Conference Proceedings | International Conference on Industrial Engineering and Operations Management Harare, Zimbabwe, October 20-22, 2020 | 2020 | Mr. A.I.M Johurul Islam | |
| Influence of ergonomics and its impact on sewing machine operators’ musculoskeletal disorders in lean environment in the RMG industry of Bangladesh. | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Prof. Dr. Mohammad Sarwar Morshed | |
| Occupational Health and Safety and Productivity Improvement in RMG Industries – A Lesson Learned for Sustainable Development (OHS) | Conference Proceedings | IMEOM 2019 | 2019 | Prof. Dr. Mohammad Sarwar Morshed | |
| Single Minute Exchange of Dies (SMED) practice in ready made garments factories in Bangladesh- Issues and challenges | Conference Proceedings | ICERE 2019 | 2019 | Prof. Dr. Mohammad Sarwar Morshed | |
| Facilitating the creation of synergies between OHS and Productivity - The implementation of lean tools | Conference Proceedings | The 6th International EurOMA | 2019 | Prof. Dr. Mohammad Sarwar Morshed | |
| A Comprehensive Study of Fuzzy TOPSIS Methodology for Ranking of Critical Factors in Evaluating Employee Performance | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Inzamam Ul Haq | |
| Qualitative model for identifying leadership using fuzzy logic | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Shah Md. Ashiquzzaman Nipu | |
| The Development of a Measure of Risk Using Fuzzy Logic | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Shah Md. Ashiquzzaman Nipu | |
| A comprehensive study of Fuzzy TOPSIS methodology for ranking of critical factors in evaluating employee performance | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Sayem Ahmed | Paper Link |
| A Comparative Analysis of Genetic Algorithm and LINGO for an Inbound Transportation Model | Journal Article | American Journal of Industrial Engineering | 2019 | Mr. Sayem Ahmed | Paper Link |
| Qualitative Model for Identifying Leadership Using Fuzzy Logic | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Sayem Ahmed | Paper Link |
| An Integrated Support Vector Classification Approach for Performance Evaluation and Selection of Multi-Attribute Suppliers Using Canonical Correlation Analysis (CCA) and Principal Component Analysis (PCA) | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Mr. Sayem Ahmed | |
| Risk Analysis of Ready-Made Garment Sector in Bangladesh | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Mr. Sayem Ahmed | |
| A Comparative Analysis of Genetic Algorithm and LINGO for an Inbound Transportation Model | Journal Article | American Journal of Industrial Engineering | 2019 | Ms. Humaira Nafisa Ahmed | |
| A Multi-Item Inventory Control Model using Multi Objective Particle Swarm Optimization (MOPSO) | Conference Proceedings | International Conference on Industrial Engineering and Operations Management (IEOM) | 2019 | Ms. Mahjabin Rahman | |
| Raw Material Inventory Control Model for RMG with Shortage Prediction using Nature Inspired Algorithm | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Ms. Mahjabin Rahman | |
| Tool Condition Monitoring using Acoustic Emission (AE) Signals in Machining of Hardened Steel with Ceramic Tool | Conference Proceedings | International Conference on Mechanical, Industrial and Materials Engineering (ICMIME) | 2019 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| Implementation of Response Surface Methodology and Genetic Algorithm in optimization of parameters in machining hardened steel (HRC 65) using ceramic tool. | Journal Article | Journal of Mechanical Engineering | 2019 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| The Effect of Elevated Temperature on the Drawability of a Circular Deep Drawn Metal Cup | Journal Article | Metals | 2019 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Current development on using Rotary Inverted Pendulum as a benchmark for testing linear and nonlinear control algorithms . | Journal Article | Mechanical Systems and Signal Processing | 2019 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Life cycle assessment of a reciprocating engine power plant in Bangladesh | Conference Proceedings | AIP Conference Proceedings 2121, 110001 (2019) | 2019 | Prof. Dr. Md Nurul Absar Chowdhury | Paper Link |
| Experimental analysis of heat transfer with CuO, Al2O3/water-ethylene glycol nanofluids in automobile radiator | Conference Proceedings | AIP Conference Proceedings · July 2019 | 2019 | Prof. Dr. Md Nurul Absar Chowdhury | |
| LCA Model for Water Footprint for Reciprocating Engine (Re) Power Plant | Conference Proceedings | Proceedings of the 2nd International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), Dhaka, Bangladesh. December 12-13, 2019 | 2019 | Prof. Dr. Md Nurul Absar Chowdhury | Paper Link |
| Synergies of OHS and Productivity Improvement in RMG Industries – An outcome of intervention process | Others | IEOM 2018 | 2018 | Prof. Dr. Mohammad Sarwar Morshed | |
| Optimization of Machining Parameter for Surface Roughness in Turning GFRP Composite Using RSM-GA Approach | Journal Article | American Journal of Materials Science and Engineering, | 2018 | Mr. Rezaul Karim Nayeem | |
| Predictive Modeling of Surface Roughness in MQL assisted Turning of SiC-Al Alloy Composites using Artificial Neural Network and Adaptive Neuro Fuzzy Inference System | Journal Article | Journal of Advanced Research in Manufacturing, Material Science and Metallurgical Engineering | 2018 | Mr. Rezaul Karim Nayeem | |
| Experimental Investigation of the effect of Cutting Parameters on Cutting Temperature using RSM and ANN in Turning AISI 1040 | Journal Article | Global Scientific Journal | 2018 | Mr. Rezaul Karim Nayeem | |
| Optimization of Machining Parameter for Surface Roughness in Turning GFRP Composite Using RSM-GA Approach "Optimization of Machining Parameter for Surface Roughness in Turning GFRP Composite Using RSM-GA Approach | Journal Article | American Journal of Materials Science and Engineering | 2018 | Mr. Sayem Ahmed | Paper Link |
| Fuzzy TOPSIS and Fuzzy ELECTRE-I Approach for Selecting the Best Suppliers by Multiple Criteria | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2018 | Mr. Sayem Ahmed | Paper Link |
| Formulation and Optimization of a Four Echelon Bi-Objective Supply Chain Network Design Model Considering Cost & Time Uncertainty | Journal Article | INTERNATIONAL JOURNAL OF ADVANCED STUDIES IN COMPUTER SCIENCE AND ENGINEERING IJASCSE | 2018 | Mr. Sayem Ahmed | Paper Link |
| Optimization of Inventory Cost for Stock Dependent Demand with Normally Distributed Lead Time Considering Complete Backlogging | Journal Article | International Journal of Scientific & Engineering Research | 2018 | Mr. Zahid Hasan Shuvo | |
| Fuzzy TOPSIS and Fuzzy ELECTRE-I Approach for Selecting the Best Suppliers by Multiple Criteria | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2018 | Mr. Hasin Md. Muhtasim Taqi | |
| Formulation and Optimization of a Four Echelon Bi-Objective Supply Chain Network Design Model Considering Cost & Time Uncertainty | Journal Article | International journal of advanced studies in computer science and engineering | 2018 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| A survey on advancement of hybrid type 2 fuzzy sliding mode control | Journal Article | Neural Computing and Applications | 2018 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Effects of process parameters on the properties of brake pad developed from seashell as reinforcement material using grey relational analysis | Journal Article | Engineering Science And Technology-An International Journal-JESTECH | 2018 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Computational investigation of pulsatile blood flow through sinusoidal stenoses of varying lengths | Journal Article | IUT JOURNAL OF ENGINEERING AND TECHNOLOGY (JET), VOL. 14, NO. 1 DECEMBER 2018 | 2018 | Prof. Dr. Md Nurul Absar Chowdhury | |
| The Impact of Human Resource Management on Productivity and Occupational Health and Safety in Readymade Garments. | Conference Proceedings | Int’l Conf. on Ind. and Mech. Engineering and Operations Management | 2017 | Prof. Dr. Mohammad Sarwar Morshed | |
| Comparison of AHP, Fuzzy Logic and ANFIS Model for Prioritizing Distribution Center with Multiple Criteria | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2017 | Mr. Sayem Ahmed | Paper Link |
| Inventory Cost Optimization with Normally Distributed Lead Time and Stochastic Demand Considering Fill Rate | Journal Article | International Journal of Scientific & Engineering Research | 2017 | Mr. Zahid Hasan Shuvo | |
| Recent advances on the use of meta-heuristic optimization algorithms to optimize the type-2 fuzzy logic systems in intelligent control | Journal Article | Neural Computing and Applications | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Cuckoo search algorithm-based design of interval Type-2 Fuzzy PID Controller for Furuta pendulum system | Journal Article | Engineering Applications of Artificial Intelligence | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis. | Journal Article | Applied Bionics and Biomechanics. | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar | Journal Article | Solar Energy | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Effect of Mixing Process Parameters and Suitability of Backbone Polymer for Aluminum Powder Injection Molding Feedstock. | Journal Article | SAINS MALAYSIANA | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Predicting the colour properties of viscose knitted fabrics using soft computing approaches. | Journal Article | Journal of the Textile Institute | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar | Journal Article | Solar Energy | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| A Study of Inventory Replenishment Problems in a Textile Industry-An Application of RAND Algorithm. | Journal Article | International Journal of Mechanical Engineering and Automation | 2016 | Prof. Dr. Mohammad Sarwar Morshed | |
| A Simulation based Approach to Optimize Inventory Replenishment with RAND Algorithm: An Extended Study of Corrected Demand using Holt’s Method for Textile. | Journal Article | American Institute of Physics | 2016 | Prof. Dr. Mohammad Sarwar Morshed | |
| Analysis of Root Causes of Road Congestion Problem in Dhaka City. | Conference Proceedings | International Conference on Mech., Industrial and Energy Engineering | 2016 | Prof. Dr. Mohammad Sarwar Morshed | |
| An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors | Journal Article | Materials and Manufacturing Processes | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Predicting the Mechanical Properties of Viscose/Lycra Knitted Fabrics Using Fuzzy Technique. | Journal Article | Advances in Fuzzy Systems | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Dyeing process parameters optimization and colour strength prediction for viscose/lycra blended knitted fabrics using Taguchi method. | Journal Article | Journal of the Textile Institute | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Fuzzy Knowledge Based Expert System for Prediction of Color Strength of Cotton Knitted Fabrics | Journal Article | Journal of Engineered Fibres and Fabrics | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring. | Journal Article | Measurement | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| An off-grid stand-alone wave energy supply system with maximum power extraction scheme for green energy utilization in Malaysian Island. | Journal Article | Desalination and Water Treatment | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Prospect of stand-alone wave-powered water desalination system | Journal Article | Desalination and Water Treatment | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Investigation on Achieving Optimum Surface Roughness by Optimizing Variable Machining Conditions in Turning GFRP Composite Using Taguchi Method and ANOVA | Journal Article | International Journal of Scientific & Engineering Research | 2015 | Mr. Inzamam Ul Haq | |
| Optimization of Machining Parameters for Minimizing Surface Roughness in Turning GFRP Composite Using ANN and PSO Methodology | Conference Proceedings | International Conference on Mechanical Engineering (ICME 2015): AIP Conference Proceedings | 2015 | Mr. Inzamam Ul Haq | |
| Renewable Energy for Rural Development in Bangladesh | Conference Proceedings | International Mechanical Engineering Conference (IMEC) | 2015 | Mr. Sayem Ahmed | Paper Link |
| Gulshan Lake-an area of concern, probable threats and extreme consequences”-A case study | Conference Proceedings | In International Conference on Mechanical, Industrial and Materials Engineering | 2015 | Mr. A K M Sarower Kabir | |
| Experimental and Theoretical Investigation of Powder-Binder Mixing Mechanism for Metal Injection Molding | Journal Article | Materials and Manufacturing Processes | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Investigation of Tool Wear and Surface Finish by Analyzing Vibration Signals in Turning Assab-705 Steel | Journal Article | Machining Science And Technology | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Computer Aided Design and Fabrication of A Custom Articulated Ankle Foot Orthosis | Journal Article | Journal Of Mechanics in Medicine and Biology | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Development of a control system for artificially rehabilitated limbs: a review | Journal Article | Biological Cybernetics | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Process Development and Product Quality of Micro-Metal Powder Injection Molding | Journal Article | Materials and Manufacturing Processes | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Multiple-objective optimization in precision laser cutting of different thermoplastics. | Journal Article | Optics And Lasers In Engineering | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Technical Study of a Standalone Photovoltaic-Wind Energy Based Hybrid Power Supply Systems for Island Electrification in Malaysia | Journal Article | PLOS ONE | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| EFFECT OF DIFFERENT ELECTRODE SHAPE VARIATION ON SURFACE ROUGHNESS OF MILD STEEL DURING EDM | Journal Article | TECHNICA CORVINIENSIS, Volume 8, Issue-2, Romania. | 2015 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Evaluation of Hybrid Genetic Tabu Search Framework on Job Shop Scheduling Benchmark Problems. | Journal Article | International Journal of Production Research | 2014 | Prof. Dr. Mohammad Sarwar Morshed | |
| Simplified design and fabrication of water sprinkler system: a survey based analysis | Conference Proceedings | 10th International Conference on Mechanical Engineering, ICME 2013 | 2014 | Mr. Amanat Ur Rahman | |
| Application of Reengineering Principles in a Local Industry | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) | 2014 | Mr. Sayem Ahmed | Paper Link |
| Fuzzy Model for Prioritizing Distribution Center with Multiple Criteria, a Case Study | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) | 2014 | Mr. Sayem Ahmed | Paper Link |
| A hybrid genetic tabu search algorithm for solving job shop scheduling problems: a case study. | Journal Article | Journal of Intelligent Manufacturing | 2012 | Prof. Dr. Mohammad Sarwar Morshed | |
| “ Identification of machined surfaces using digital image processing”, | Journal Article | International Journal of Engineering. Issue X, 2012, Vol-1, pp 213-228. | 2012 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Surface roughness optimization of EDM for circular copper electrode by RSM-GA approach” | Journal Article | International Journal of Engineering, | 2012 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Multi-objective Genetic Algorithms for Scheduling of Radiotherapy Treatments for Categorised Cancer Patients | Journal Article | Journal of Expert Systems with Applications | 2011 | Prof. Dr. Mohammad Sarwar Morshed | |
| “Development of microcontroller based controlling unit for flexible control of Robot Structure” ACTA TECHNICA CORVINIENSIS Vol. 2 Issue 6 2011 pp 105-108. | Journal Article | ACTA TECHNICA CORVINIENSIS Vol. 2 Issue 6 2011 pp 105-108. | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Design and Implementation of an Articulated Robotic Arm for Precise Positioning” | Journal Article | Advanced Materials Research Vols. 201-203 (2011) pp 1972-1977 Trans Tech Publications, Switzerland. | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| ”3-D Contour generation and determination of surface roughness of sheet and horizontally milled plate using Digital Image Processing. | Journal Article | International Journal of Engineering, Vol.3 Issue 9 pp 127-130, 2011. | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Investigation of the effect of rectangular and trapezium cross section of gating system by CFD Simulation in permanent mould casting of Al-Alloy.” | Journal Article | International Journal of Advanced Science and Information Technique. Vol.-2, Issue-3 pp 4-8, 2011. | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Detection, Categorization, and Assessment of Eye Cataracts Using Digital Image Processing”. | Journal Article | International Journal of Computer, The Internet and Management (IJCIM), Vol.-19, No.SP-1, ISSN0858702, 2011 | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Surface roughness characterization using digital image processing technique | Journal Article | 2010 | Prof. Dr. Md Nurul Absar Chowdhury | ||
| Scheduling: Manufacturing to Healthcare Organisation | Others | 2009 | Prof. Dr. Mohammad Sarwar Morshed | ||
| Knowledge Base GA Scheduling of Radiotherapy Cancer Patients. | Others | 2009 | Prof. Dr. Mohammad Sarwar Morshed | ||
| Multi-objective Scheduling of Radiotherapy Cancer Patients | Conference Proceedings | The 23rd European Conferences on Operational Research (EURO 2009) | 2009 | Prof. Dr. Mohammad Sarwar Morshed | |
| Genetic Algorithm Based Scheduling of Radiotherapy Treatments for Cancer Patients | Journal Article | Artificial Intelligence in Medicine | 2009 | Prof. Dr. Mohammad Sarwar Morshed | |
| Multi-objective Scheduling of Radiotherapy Cancer Patients. | Others | 2009 | Prof. Dr. Mohammad Sarwar Morshed | ||
| “An Approach to Relate and Optimize Metal Forming Process Parameters by Fuzzy Logic”, | Journal Article | AMSE Journal, France, 2009. | 2009 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Radiotherapy Scheduling for Cancer Treatment using Metaheuristic | Conference Proceedings | OR50 | 2008 | Prof. Dr. Mohammad Sarwar Morshed | |
| “Design of a Computer Vision Integrated Solid Handling System to Teach Manufacturing Automation to Third Year Undergraduate Students”, | Journal Article | Australian Journal of Basic and Applied Sciences, Volume-2, Issue-4,2008 Pages: 1139-1147, Australia (ISSN: 1991-81 | 2008 | Prof. Dr. Md Nurul Absar Chowdhury | |
| A hybrid configuration for solving job shop scheduling problems | Conference Proceedings | The 8th Asia Pacific Industrial Eng. and Management Conference (APIEMS 2007) | 2007 | Prof. Dr. Mohammad Sarwar Morshed | |
| “Development of a multi criteria and parameter Optimization tool for the Cutting Conditions for Turning process” | Journal Article | International Journal of Mechanical and Materials Engineering, Faculty of Engineering, University of Malaya, Malaysia.,Vol-2, No.-1, pag | 2007 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Development and evolution of a computer assisted real-time control system for a converted CNC lathe”, | Journal Article | International Journal of Manufacturing Research, Inderscience Publishers, USA, 2007. | 2007 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Surface quality improvement of a machined surface using a newly designed cylindrical Surface rolling tool”, | Journal Article | Journal of The Institution of Engineers, Bangladesh, Multidisciplinary, Vol. Mul-dis 32, No. 1 December-2007, page: 103-108. | 2007 | Prof. Dr. Md Nurul Absar Chowdhury | |
| "Designing and study of a Material Handling System with auto-synchronizing technique for flexible productivity control" | Journal Article | International Journal of Engineering & Technology (IJET), volume 3 issue 1, page 7-16, June 2006 | 2006 | Prof. Dr. Md Nurul Absar Chowdhury | |
| ”Development of an Automated Process Planning system for a rectangular Milling Object” " | Journal Article | International Journal of Engineering & Technology (IJET), volume 3 issue 3,page 58-63, December 2006 | 2006 | Prof. Dr. Md Nurul Absar Chowdhury | |
| "Simulation of the plastic field in the deformation zone of surface rolling tools under variable work hardening conditions" | Journal Article | Journal of Engineering and Technology (JET), Vol. 5 No. 1 January-June 2006.Pages 1-20. | 2006 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Development of an optimization technique by Fuzzy logic to predict the optimum process parameter for Deep drawing process" ”, | Journal Article | AMSE Journal, France, Best-of Book 2006 of AMSE Conferences, pp. 37-46. | 2006 | Prof. Dr. Md Nurul Absar Chowdhury | |
| A Job Shop Scheduling Systems and its Application to Real Life Problems | Conference Proceedings | ICMPM 2005 | 2005 | Prof. Dr. Mohammad Sarwar Morshed | |
| Hybrid Procedure of Job Shop Scheduling | Conference Proceedings | The 21st International Manufacturing Conference (ICM21) | 2004 | Prof. Dr. Mohammad Sarwar Morshed | |
| Initial Solutions and Hybrid Model of Job Shop Scheduling | Others | PREP 2004 proceedings | 2004 | Prof. Dr. Mohammad Sarwar Morshed | |
| A Single Criterion Job Shop Scheduling Using Hybrid Procedure of GATS | Journal Article | Computer Science and Engineering Research Journal | 2004 | Prof. Dr. Mohammad Sarwar Morshed | |
| Multi-Criteria Decision Making Models for Performance Evaluation and Selection of Suppliers applying Fuzzy TOPSIS and DEA | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 0 | Mr. Kazi Safowan Shahed | |
| “ Analysis of Supply Chain Efficiency and Suggestions for improvement, A CASE STUDY ” Proceedings of the International Conference on Mechanical, Industrial & Energy Engineering (ICMIEE), 2014. ISBN: 978-984-33-8429, ISSN: 2409-7365 | Conference Proceedings | 0 | Mr. A K M Sarower Kabir | ||
| “Development of a mathematical model for Elastic Field simulation during unloading condition in Surface Burnishing Processes”, | Journal Article | Journal of Engineering, TOME VI (2008), Page: 55-64, Annals of faculty of Engineering Hunedoara Romania, 2008. | 0 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Ride Comfort of a 4 DOF Nonlinear Heavy Vehicle Suspension” I | Journal Article | SESCO JOURNAL of Science and Technology Volume 8, Number 13, May 2012 (80-85). | 0 | Prof. Dr. Md Nurul Absar Chowdhury | |
| " Design and Construction of a coordinate measuring machine and computerized simulation of a measuring object with flexible means of performing accurate and fast dimensional inspection of objects" | Journal Article | ournal of Mechanical Engineering, JME (IEB) IEB, Vol. ME 35, June issue 2006, page 67-76. | 0 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Optimization of blank `holding force in deep drawing process by fuzzy logic”, | Journal Article | Journal of Engineering and Technology, Vol. 6 No. 1 January – June 2007, Islamic University of Technology (IUT), OIC, Bangladesh, pp. 29-39. | 0 | Prof. Dr. Md Nurul Absar Chowdhury |
Faculty of Engineering
Ahsanullah University of Science and Technology
141 & 142, Love Road, Tejgaon Industrial Area, Dhaka-1208
Tel. (8802) 8870422, Ext. 107, 114, Fax : (8802) 8870418
Email: info@aust.edu, regr@aust.edu