Department of
| Title | Type | Journal Name | Year | Author | URL |
|---|---|---|---|---|---|
| [Under Review] Design, Experimental and Numerical Analysis of a Two Buoy Floating Wave Energy Convertor | Journal Article | Ocean Engineering | 2024 | Mr. Inzamam Ul Haq | |
| Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications | Journal Article | AIP Advances | 2024 | Mr. Rezaul Karim Nayeem | Paper Link |
| Mechanical characterization of mulberry silk reinforced hybrid composite for enhanced application | Journal Article | Results in Materials | 2024 | Mr. Rezaul Karim Nayeem | Paper Link |
| Surface roughness and cutting force in turning of alkaline-treated banana fibre-reinforced polymer composite: Compressed air cutting | Journal Article | Journal of Reinforced Plastics and Composites | 2024 | Mr. Rezaul Karim Nayeem | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Mr. Rezaul Karim Nayeem | Paper Link |
| Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications | Journal Article | AIP Advances | 2024 | Mr. Shah Md. Ashiquzzaman Nipu | |
| A new approach to inventory classification using a multi-criteria decision-making method to increase business efficiency | Journal Article | Int. J. Management Concepts and Philosophy | 2024 | Mr. Shah Md. Ashiquzzaman Nipu | |
| Additive manufacturing-based composites for sensors and other applications | Book | Materials Science and Materials Engineering | 2024 | Mr. Shah Md. Ashiquzzaman Nipu | Paper Link |
| Societal Impact of Recycling Waste into Composite Materials | Journal Article | Societal Impacts | 2024 | Dr. Fazlar Rahman | Paper Link |
| Experimental and Numerical Study of Conical-Shaped Pin Finned Heat Sink with PCM Material | Journal Article | Malaysian Journal on Composites Science and Manufacturing | 2024 | Dr. Fazlar Rahman | Paper Link |
| Mechanical characterizations of waste face masks reinforced polyester composites: Recycling wastes into resources | Journal Article | Heliyon | 2024 | Dr. Fazlar Rahman | Paper Link |
| Measurement and Controlling Friction Force in a Sliding Microwire by Size and Boundary Condition Variation | Conference Proceedings | Proceedings of ICME 2023,14th International Conference on Mechanical Engineering, 18-19 December 2023, BUET, Dhaka | 2024 | Dr. Fazlar Rahman | |
| Efect of Sesbania grandifora stem fber reinforcement on mechanical, chemical, thermal, and physical properties of vinyl ester material | Journal Article | Biomass Conversion and Biorefnery | 2024 | Dr. Fazlar Rahman | Paper Link |
| Effect of fiber orientation on mechanical properties of betel nut (areca palm) stem fiber reinforced laminated polyester composites | Journal Article | Advances in Materials and Processing Technologies | 2024 | Dr. Fazlar Rahman | Paper Link |
| Fundamental of Finite Element Analysis (FEA) and Solving Stiffness Matrix by Newton-Raphson Method | Journal Article | Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh | 2024 | Dr. Fazlar Rahman | Paper Link |
| Non-simultaneous impact of droplet pairs on solid surfaces | Journal Article | Physics of Fluids | 2024 | Dr. Anjan Goswami | Paper Link |
| Nanomaterials for sensors and other applications | Book | Comprehensive Materials Processing (Second Edition) | 2024 | Mr. Zahid Hasan Shuvo | Paper Link |
| Applications of biocomposites—Tissue engineering and regenerative medicine | Book | Comprehensive Materials Processing (Second Edition) | 2024 | Mr. Zahid Hasan Shuvo | Paper Link |
| Additive manufacturing-based composites for sensors and other applications | Book | Comprehensive Materials Processing (Second Edition) | 2024 | Mr. Zahid Hasan Shuvo | Paper Link |
| Efect of Sesbania grandifora stem fber reinforcement on mechanical, chemical, thermal, andphysical properties of vinyl ester material | Journal Article | Biomass Conversion and Biorefinery | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Characterization of Mechanical Properties of Woven Jute, Kenaf & Woven E-Glass Hybrid Composite Laminates and their Response to Low Velocity Impact | Conference Proceedings | Proceedings of ICME 2023 14th International Conference on Mechanical Engineering 18-19 December 2023, BUET, Dhaka, Bangladesh | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Tensile Properties of 3D-Printed Jute-Reinforced Composites via Stereolithography | Journal Article | Applied Mechanics | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Stacking Sequence and Weight Fraction Effect on Tensile and Flexural Properties of Woven Jute and Woven Carbon-Jute Reinforced Polyester Composites | Conference Proceedings | IOP Conf. Series: Materials Science and Engineering | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Enhancement of Additively Manufactured Bagasse Fiber-Reinforced Composite Material Properties Utilizing a Novel Fiber Extraction Process Used for 3D SLA Printing | Journal Article | Journal of Manufacturing and Materials Processing | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Evaluation of the Mechanical Properties of a Novel Hybrid Composite Composed of Rattan and Date Palm Fiber: An Experimental Study | Journal Article | Advances in Polymer Technology | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| FEM Simulation of Dry Machining Using Ansys Workbench | Conference Proceedings | Proceedings of ICME 2023 14th International Conference on Mechanical Engineering, SSRN | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Numerical Analysis of Different Passive Microfluidic Channels for Enhanced Fluid Transportation | Journal Article | JOURNAL OF ENGINEERING AND TECHNOLOGY (JET) | 2024 | Mr. Aquib Rahman | Paper Link |
| Extraction of Cellulosic Compound from Jackfruit Peel Waste and Characterization of PVA Cellulose Composite as Biodegradable Film | Journal Article | Journal of Engineering | 2024 | Mr. Aquib Rahman | Paper Link |
| Mechanical, Thermal and Morphological Characterization of Graphene/Al2O3-Reinforced Epoxy Hybrid Nanocomposites | Journal Article | Macromolecular Materials and Engineering | 2024 | Mr. Shadman Sharar Alam | Paper Link |
| Extraction of Cellulosic Compound from Jackfruit Peel Waste and Characterization of PVA Cellulose Composite as Biodegradable Film | Journal Article | Journal of Engineering | 2024 | Mr. Shadman Sharar Alam | Paper Link |
| Disruptive supply chain technology assessment for sustainability journey: A framework of probabilistic group decision making | Journal Article | Heliyon | 2024 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Additive manufacturing-based composites for sensors and other applications | Book | 2024 | Mr. Mohammad Joynal Abedin | Paper Link | |
| Recent developments in functional plant fiber-based composites and their engineering applications | Book | 2024 | Mr. Mohammad Joynal Abedin | Paper Link | |
| Advances in the performance of engineered cementitious composites under extreme conditions | Book | 2024 | Mr. Mohammad Joynal Abedin | Paper Link | |
| A Comprehensive Analysis and Ranking of Barriers to implement lean practices in chemical management of Leather Tanning Industries in Bangladesh | Conference Proceedings | Proceedings of the 6th Industrial Engineering and Operations Management | 2024 | Dr. Abu Hamja | Paper Link |
| Numerical investigation of the enhancement of the aerodynamic performance for newly modified blended airfoils utilizing S809, S829, and NACA 2412 baseline shapes | Journal Article | Arabian Journal for Science and Engineering | 2024 | Dr. Abu Hamja | Paper Link |
| Improving Occupational Health Condition and Implementing 5S in the Leather Tanning Industry: An Initiative Towards Sustainability | Conference Proceedings | 1st International Conference on Science and Technology for Sustainable Development 2024 (ICSTSD2024) | 2024 | Dr. Abu Hamja | |
| Improving Occupational Health and Sustainability of Leather Industry in Bangladesh: An Initiative of SusLeather Project | Conference Proceedings | 1st International Conference on Science and Technology for Sustainable Development 2024 (ICSTSD2024) | 2024 | Dr. Abu Hamja | |
| Municipal solid waste management: Identification and analysis of technology selection criteria using Fuzzy Delphi and Fuzzy DEMATEL technique | Journal Article | Heliyon | 2024 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Mr. Rafat Rahman | Paper Link |
| Embracing Sustainability in Green Supplier Evaluation: A Novel Integrated Multi-Criteria Decision-Making Framework | Journal Article | Contemporary Mathematics | 2024 | Mr. Rafat Rahman | Paper Link |
| Machinability investigation of natural fibers reinforced polymer matrix composite under drilling: Leveraging machine learning in bioengineering applications | Journal Article | AIP Advances | 2024 | Mr. Sheak Salman | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Mr. Sheak Salman | Paper Link |
| The pathways to lean manufacturing for circular economy: Implications for sustainable development goals | Journal Article | Journal of Responsible Production and Consumption | 2024 | Mr. Sheak Salman | Paper Link |
| Recent trends in the customization of sensor materials for biomedical applications | Book | In Book: Materials Science and Materials Engineering | 2024 | Mr. Mohammad Ali Noor Zaman | Paper Link |
| Hybrid synthetic fibers: composites and automotive applications | Book | In book: Synthetic and Mineral Fibers, Their Composites and Applications | 2024 | Mr. Mohammad Ali Noor Zaman | Paper Link |
| Production of syngas from oil palm shell biomass using microwave gasification | Journal Article | Energy | 2024 | Dr. Istiaq Jamil Siddique | Paper Link |
| Hydro-Thermal and Entropy Generation Effects of Helical Tube Heat Exchanger across Different Dean Numbers with Novel Filleted-Hexagonal Profile using Sio2-Zno/Water Hybrid Nanofluid | Conference Proceedings | 14th International Conference on Mechanical Engineering (ICME 2023) | 2024 | Dr. Istiaq Jamil Siddique | Paper Link |
| Numerical Simulation of Microwave Heating of Cylindrical Shaped Biomass Material | Conference Proceedings | 14th International Conference on Mechanical Engineering (ICME 2023) | 2024 | Dr. Istiaq Jamil Siddique | Paper Link |
| Stacking Sequence and Weight Fraction Effect on Tensile and Flexural Properties of Woven Jute and Woven Carbon-Jute Reinforced Polyester Composites | Conference Proceedings | Materials Science and Engineering | 2024 | Mr. Golam Fahim | Paper Link |
| Recent trends in the customization of sensor materials for biomedical applications | Book | Elsevier Reference Collection in Materials Science and Materials Engineering | 2024 | Mr. Golam Fahim | Paper Link |
| Developments in sensor materials, technologies and applications | Book | Reference Module in Materials Science and Materials Engineering | 2024 | Mr. Md. Araf Hossan | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceuticals industry: a Bayesian best worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Ms. Sadia Hasanat | |
| A pythagorean fuzzy approach to evaluate the challenges to implementing circular economy in the glass manufacturing industry: Implications for sustainable development | Journal Article | Results in Engineering | 2024 | Ms. Afia Ahsan | Paper Link |
| Exploring lean manufacturing drivers for enhancing circular economy performance in the pharmaceutical industry: a Bayesian best–worst approach | Journal Article | International Journal of Industrial Engineering and Operations Management | 2024 | Ms. Afia Ahsan | Paper Link |
| A novel pin finned structure-embedded microchannel heat sink: CFD-data driven MLP, MLR, and XGBR machine learning models for thermal and fluid flow prediction | Journal Article | Energy | 2024 | Mr. Nabil Mohammad Chowdhury | Paper Link |
| A novel case of honeycomb shaped pin fin heat sink: CFD-data driven machine learning models for thermal performance prediction | Journal Article | Case Studies in Thermal Engineering | 2024 | Mr. Nabil Mohammad Chowdhury | Paper Link |
| "A review of existing research works on ball burnishing based on tools and work materials" | Journal Article | Journal of Engineering and Technology (JET) | 2024 | Mr. Ashraf Siddiquee Ashrafee | Paper Link |
| Integrating Supply Chain Partners through Implementing Industry 4.0 Technologies to Enhance Competitiveness | Journal Article | Jordan Journal of Mechanical and Industrial Engineering | 2024 | Mr. Rafid Ahmed Chowdhury | Paper Link |
| Mechanical property enhancement of graphene-kenaf-epoxy multiphase composites for automotive applications | Journal Article | Composites Part A: Applied Science and Manufacturing | 2024 | Mr. Chowdhury Ahmed Shahed | Paper Link |
| Mechanical Investigation of Kenaf/Carbon Hybrid Composites for Building and Construction Applications | Journal Article | Journal of Composites for Construction | 2024 | Mr. Chowdhury Ahmed Shahed | |
| Thermo-mechanical performance of wolframite mineral reinforced siloxane-modified epoxy-based intumescent coating for structural steel | Journal Article | Polymers for Advanced Technologies | 2024 | Mr. Chowdhury Ahmed Shahed | |
| Recycling of Plastic Polymer: Reinforcement of Building Material Using Polymer Plastics of Used COVID-19 Syringes | Journal Article | Advances in Sustainable Building Materials and Construction | 2023 | Prof. Dr. Mohammad Sarwar Morshed | |
| Solar thermal adsorption cooling system in Bangladesh: INSEL simulation and economic analysis | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE) | 2023 | Dr. Mahbubul Muttakin | |
| Numerical investigation of the hydrothermal performance of novel pin-fin heat sinks with hyperbolic, wavy, and crinkle geometries and various perforations | Journal Article | International Journal of Thermal Sciences | 2023 | Dr. Mohammad Rejaul Haque | |
| Numerical Investigation of the Enhancement of the Aerodynamic Performance for Newly Modified Blended Airfoils Utilizing S809, S829, and NACA 2412 Baseline Shapes | Journal Article | Arabian Journal for Science and Engineering | 2023 | Dr. Mohammad Rejaul Haque | |
| Effect of fibre orientation and stacking sequence on properties of hybrid composites | Journal Article | Materials Science and Technology | 2023 | Dr. Mohammad Rejaul Haque | |
| Numerical investigation of the thermal performance optimization inside a heat exchanger tube using different novel combination of perforations on Y-shaped insert | Journal Article | International Journal of Thermal Sciences | 2023 | Dr. Mohammad Rejaul Haque | |
| Mechanical characterization of banana-nylon fibre reinforced Vinyl ester composites | Journal Article | Advances in Materials and Processing Technologies | 2023 | Dr. Mohammad Rejaul Haque | |
| Numerical Investigation of MHD Mixed Convection Phenomenon in a Lid-Driven Hexagonal Enclosure with Wavy Wall and SWCNT-MWCNT Nanofluids | Journal Article | Arabian Journal for Science and Engineering | 2023 | Dr. Mohammad Rejaul Haque | |
| Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Mr. Rezaul Karim Nayeem | Paper Link |
| Assessing the barriers to lean manufacturing adoption in the furniture industry of Bangladesh: a fuzzy-DEMATEL study | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Rezaul Karim Nayeem | Paper Link |
| A decision support system for classifying supplier selection criteria using machine learning and random forest approach | Journal Article | Decision Analytics Journal | 2023 | Mr. Shah Md. Ashiquzzaman Nipu | |
| Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Mr. Shah Md. Ashiquzzaman Nipu | |
| An Experimental Investigation for Multi-objective Optimization of Turning Parameters on Graphene/Al2O3 Reinforced Polymer Hybrid Nanocomposite using RSM Combined with GRA | Conference Proceedings | 14th International Conference on Mechanical Engineering December 18-19, 2023 | 2023 | Mr. Shah Md. Ashiquzzaman Nipu | |
| Quantification of Electrostatic and Adhesive Forces Between Microwire and Microprobe Using Experimental and Numerical Approaches | Journal Article | Arabian Journal for Science and Engineering | 2023 | Dr. Fazlar Rahman | Paper Link |
| Measurement and Controlling Friction Force in a Sliding Microwire by Size and Boundary Condition Variation | Conference Proceedings | International Conference on Mechanical Engineering (ICME 2023), BUET, Paper ID 311 | 2023 | Dr. Fazlar Rahman | |
| Effect of Human Hair on Mechanical Properties of Jute and BNH Fiber Reinforced Hybrid Polyester Composites | Journal Article | Journal of Natural Fibers | 2023 | Dr. Fazlar Rahman | Paper Link |
| Experimental and Numerical Study of Conical Shaped Pin Finned Heat Sink with PCM Material | Conference Proceedings | International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE) 2023 | 2023 | Dr. Fazlar Rahman | |
| Suppression of wetting transition on evaporative fakir droplets by using slippery superhydrophobic surfaces with low depinning force. | Journal Article | Scientific Reports | 2023 | Dr. Anjan Goswami | Paper Link |
| Central sheet formation from simultaneous impacts of two droplets on a dry substrate | Conference Proceedings | 11th International Conference on Multiphase Flow, Kobe, Japan | 2023 | Dr. Anjan Goswami | |
| Simultaneous impact of droplet pairs on solid surfaces | Journal Article | Journal of Fluid Mechanics | 2023 | Dr. Anjan Goswami | Paper Link |
| Reduction of Total Drag for Finite Cylinders in Turbulent Flow with a Half-C Shape Upstream Body | Journal Article | International Journal of Fluid Mechanics Research | 2023 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| DESIGN AND DEVELOPMENT OF A GPS-BASED HOVER QUADCOPTER USING THE STM-32 MICROCONTROLLER | Conference Proceedings | 17th Annual Paper Meet-2022, Jan 2023, IEB, Bangladesh | 2023 | Dr. Mohammad Harun-Or-Rashid | |
| Design and Development of a Battery Powered Motor Driven Rice Transplanting Machine | Conference Proceedings | 17th Annual Paper Meet-2022, Jan 2023, IEB, Bangladesh | 2023 | Dr. Mohammad Harun-Or-Rashid | |
| Design and Development of a Stair Climbing Four-Wheeled Robot | Conference Proceedings | 17th Annual Paper Meet-2022, Jan 2023, IEB, Bangladesh | 2023 | Dr. Mohammad Harun-Or-Rashid | |
| Progress in recovery, recycling and reuse of polymers, biopolymers and their composites | Book | Comprehensive Materials Processing (Second Edition) | 2023 | Mr. Zahid Hasan Shuvo | Paper Link |
| Prediction & Cutting Parameter Optimization for Surface Roughness of Laser Machining of SS-304 Using Taguchi Method | Journal Article | Research and Reviews: Journal of Mechanics and Machines | 2023 | Mr. Zahid Hasan Shuvo | |
| Experimental Investigation on the Effects of Different Oil-based MQL on the Surface Roughness of Aluminum 6061 Alloy | Journal Article | Research and Reviews: Journal of Mechanics and Machines | 2023 | Mr. Zahid Hasan Shuvo | |
| Composite materials from synthetic and natural sources: Fabrication techniques and applications | Book | Comprehensive Materials Processing (Second Edition) | 2023 | Mr. Zahid Hasan Shuvo | Paper Link |
| Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Ms. Mahjabin Moon | Paper Link |
| Unveiling the microstructure of LES manufactured parts for sustainable productive business | Journal Article | Journal of Alloys and Metallurgical Systems | 2023 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Review of Intelligence for Additive and Subtractive Manufacturing: Current Status and Future Prospects | Journal Article | Micromachines | 2023 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| EVALUATION OF MECHANICAL PROPERTIES OF KENAF-WOVEN KEVLAR & JUTE-WOVEN KEVLAR REINFORCED HYBRID COMPOSITES WITH DIFFERENT WEIGHT FRACTIONS AND PLY SEQUENCES | Conference Proceedings | 7 th International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE2023) | 2023 | Dr. Md. Shahnewaz Bhuiyan | |
| EXPERIMENTAL INVESTIGATION ON THE PERFORMANCES OF DIFFERENT PAD MATERIALS USED IN A SUSTAINABLE ECO-FRIENDLY REFRIGERATOR | Journal Article | Journal of Mechanical Engineering, The Institute of Engineers, Bangladesh | 2023 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Assessing the critical success factors for implementing industry 4.0 in the pharmaceutical industry: Implications for supply chain sustainability in emerging economies | Journal Article | PLOS ONE | 2023 | Dr. Muhommad Azizur Rahman | Paper Link |
| Experimental modeling techniques in electrical discharge machining (EDM): A review | Journal Article | The International Journal of Advanced Manufacturing Technology | 2023 | Dr. Muhommad Azizur Rahman | Paper Link |
| Investigation of the effect of vibration in the multi-objective optimization of dry turning of hardened steel | Journal Article | The International Journal of Industrial Engineering and Operations Management (IJIEOM) | 2023 | Dr. Muhommad Azizur Rahman | Paper Link |
| Unveiling the Microstructure of LES Manufactured Parts for Sustainable Productive Business | Journal Article | Journal of Alloys and Metallurgical Systems | 2023 | Dr. Muhommad Azizur Rahman | Paper Link |
| Review of Intelligence for Additive and Subtractive Manufacturing: Current States and Future Prospects | Journal Article | Micromachines | 2023 | Dr. Muhommad Azizur Rahman | Paper Link |
| Modeling approaches for bio-based composites | Book | Materials Science and Materials Engineering | 2023 | Mr. Yeadul Islam Sazal | Paper Link |
| Fabrication and analysis of Biomass pallets from rice husk and wood | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy 2023 | 2023 | Mr. Yeadul Islam Sazal | |
| Recent advances in applications of hybrid composites | Book | Materials Science and Materials Engineering | 2023 | Mr. Yeadul Islam Sazal | Paper Link |
| Prediction & Cutting Parameter Optimization for Surface Roughness of Laser Machining of SS-304 Using Taguchi Method | Journal Article | Research and Reviews: Journal of Mechanics and Machines | 2023 | Mr. Aquib Rahman | |
| Review of developments in sensor technology for monitoring of health-related conditions | Book | Comprehensive Materials Processing | 2023 | Mr. Aquib Rahman | Paper Link |
| Investigation of the effect of vibration in the multi-objective optimization of dry turning of hardened steel | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Aquib Rahman | Paper Link |
| Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Mr. Aquib Rahman | Paper Link |
| Review of Recent Developments in processing and application of Aluminium Matrix Composites with Alumina particles | Book | Comprehensive Materials Processing | 2023 | Mr. Aquib Rahman | Paper Link |
| Review of the current issues of connectivity, durability and reliability of sensors & their solutions | Book | Comprehensive Materials Processing | 2023 | Mr. Aquib Rahman | Paper Link |
| FABRICATION & MECHANICAL CHARACTERIZATION OF JUTE, COIR AND BANANA FIBER-REINFORCED HYBRID EPOXY COMPOSITE | Journal Article | Journal of Mechanical Engineering | 2023 | Mr. Shadman Sharar Alam | Paper Link |
| A novel approach to optimize material distributions of rotating functionally graded circular disk under minimum and prescribed stresses | Journal Article | Materials Today Communications | 2023 | Mr. Sazedur Rahman | Paper Link |
| Modeling approaches for bio-based composites | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Annual Plant Reinforced Biocomposite Fiberboards—Investigation on Mechanical Properties | Book | Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives: Processing, Properties and Applications | 2023 | Mr. Sazedur Rahman | Paper Link |
| Overview of Bioceramics | Book | Advanced Bioceramics | 2023 | Mr. Sazedur Rahman | Paper Link |
| Biobased composites reinforced with annual plants—Design, manufacturing techniques, and parameters influencing the overall properties | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Recent advances in applications of hybrid composites | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Biobased composites for advanced applications: Possibilities and difficulties on the path to circularity | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Fabrication and analysis of biomass pellets from rice husk and wood | Conference Proceedings | The 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2023) | 2023 | Mr. Sazedur Rahman | |
| Recent developments in functional plant fiber-based composites and their engineering applications | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Processing of Bioceramics by Extrusion and Slip Casting | Book | Advanced Bioceramics | 2023 | Mr. Sazedur Rahman | Paper Link |
| Design, fabrication, and characterization of 3D-printed ABS and PLA scaffolds potentially for tissue engineering | Journal Article | Results in Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Drivers for Internet of Things (IoT) adoption in supply chains: Implications for sustainability in the post-pandemic era | Journal Article | Computers and Industrial Engineering | 2023 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Behavioural factors for Industry 4.0 adoption: implications for knowledge-based supply chains | Journal Article | Operations Management Research | 2023 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| An integrated approach to explore the barriers to lean manufacturing in the context of the COVID-19 pandemic: implications for sustainability | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Critical success factors for circular economy in the waste electrical and electronic equipment (WEEE) sector in an emerging economy: Implications for stakeholders | Journal Article | Journal of Cleaner Production | 2023 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Investigation of the effect of vibration in the multi-objective optimization of dry turning of hardened steel | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| Review of new developments in different types of sensors over the past 15 years | Book | Materials Science and Materials Engineering | 2023 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| Review of the current issues of connectivity, durability and reliability of sensors and their soluti | Book | Materials Science and Materials Engineering | 2023 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| Biobased composites reinforced with annual plants—Design, manufacturing techniques, and parameters influencing the overall properties | Book | Materials Science and Materials Engineering | 2023 | Mr. Mohammad Joynal Abedin | Paper Link |
| Recent advances in applications of hybrid composites | Book | Materials Science and Materials Engineering | 2023 | Mr. Mohammad Joynal Abedin | Paper Link |
| An Assessment of Solar Micro-Grid System in the Islands of Bangladesh: A Techno-Economic Analysis for Sustainable Energy Access | Conference Proceedings | International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE) | 2023 | Mr. Mohammad Joynal Abedin | |
| Study of Agricultural Waste Gasification to Meet the Energy Demand | Conference Proceedings | International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE) | 2023 | Mr. Mohammad Joynal Abedin | |
| Engineered cementitious composites: Design, structural and 3D printing applications | Book | Materials Science and Materials Engineering | 2023 | Mr. Mohammad Joynal Abedin | Paper Link |
| Fabrication and Analysis of Biomass Pellets from Rice husk and Wood. | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy. | 2023 | Mr. Mohammad Joynal Abedin | |
| Fabrication and Analysis of Biomass Pellets from Rice Husk and Wood | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2023) | 2023 | Dr. Abu Hamja | |
| Evaluation of Mechanical Properties of Kenaf-Woven Kevlar & Jute-Woven Kevlar Reinforced Hybrid Composites with Different Weight Fractions and Ply Sequences | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2023) | 2023 | Dr. Abu Hamja | |
| Reduction of changeover time through SMED with RACI integration in garment factories | Journal Article | International Journal of Lean Six Sigma | 2023 | Dr. Abu Hamja | Paper Link |
| Recycling of Plastic Polymer: Reinforcement of Building Material Using Polymer Plastics of Used COVID-19 Syringes | Journal Article | Buildings | 2023 | Dr. Abu Hamja | Paper Link |
| Critical success factors for circular economy in the waste electrical and electronic equipment (WEEE) sector in an emerging economy: Implications for stakeholders | Journal Article | Journal of Cleaner Production | 2023 | Mr. Md. Adib Rahman | Paper Link |
| Review of the developments in composite materials over the last 15 years | Book | Comprehensive Materials Processing | 2023 | Mr. A K M Sarower Kabir | Paper Link |
| Review of New Developments in Different Types of Sensors Over the Past 15 Years | Others | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Developments in Coatings technologies for optical fibre sensors | Book | Comprehensive Materials Processing, 2nd Edition. | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Review of Developments in Sensor Technology For Monitoring of Health-Related Conditions | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Review of The Current Issues of Connectivity, Durability and Reliability of Sensors and Their Solutions | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Review of the Developments in Composite Materials Over the Last 15 Years | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Review of Recent Developments in processing and application of Aluminium Matrix Composites with Alumina particles | Book | Reference Module in Materials Science and Materials Engineering 2023 | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method | Journal Article | Advances in Materials Science and Engineering | 2023 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Flexural behaviors of sandwich panels with AR-glass textile-reinforced concrete under the low-velocity impact | Journal Article | Journal of Building Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| A critical review of developments in the characterization of metal matrix composites with particulate reinforcements | Book | In Book: Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Modeling approaches for bio-based composites | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Improving corrosion resistance of BFRP bars by coating CNTs modified resin in simulated pore solution of seawater sea sand concrete | Journal Article | Construction and Building Materials | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Effects of volume fractions and surface coating of textile yarns on the tensile performance of AR-glass textile reinforced concrete | Journal Article | Journal of Building Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Characterization and Comparative Evaluation of Structural, Chemical, Thermal, Mechanical, and Morphological Properties of Plant Fibers | Book | In Book: Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Advances in biocomposite fabrication: Emerging technologies and their potential applications | Book | In Book: Reference Module in Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| A comparative study of bare and seawater sea sand concrete wrapped basalt fiber-reinforced polymer bars exposed to laboratory and real marine environments | Journal Article | Journal of Construction and Building Materials | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Durability of BFRP bars embedded in seawater sea sand coral aggregate concrete in simulated seawater environment: Effects of coral coarse aggregate and cement contents | Journal Article | Journal of Construction and Building Materials | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Engineered cementitious composites: Design, structural and 3D printing applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Advanced biopolymers for automobile and aviation engineering applications | Journal Article | Journal of Polymer Research | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Damping under Varying Frequencies, Mechanical Properties, and Failure Modes of Flax/Polypropylene Composites | Journal Article | Journal of Polymers | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Eco-friendly green approach of nickel oxide nanoparticles for biomedical applications | Journal Article | Journal of Open Chemistry | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Composite materials from synthetic and natural sources: Fabrication techniques and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| A critical review of developments in characterizations of polymer matrix composites with particulate reinforcements | Book | In book: Comprehensive Materials Processing, Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Ceramic matrix composites with particulate reinforcements—Progress over the past 15 years | Book | In Book: Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Plastic waste to plastic value: Role of industrial biotechnology | Book | In Book: Biodegradability of Conventional Plastics | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Recent advances in sustainable building materials for the construction industry: Mechanical performance and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Recent advances in applications of hybrid composites | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Nanoparticles, nanocomposites, green/eco-composites, and hybrid composites and their applications in energy sectors | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Advances in bioactive nanoparticles for wound healing, tissue engineering and drug delivery | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Recent advancements in polymer matrix nanocomposites for bone tissue engineering applications | Journal Article | Journal of Drug Delivery Science and Technology | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Properties Prediction of Composites Based on Machine Learning Models: A Focus on Statistical Index Approaches | Journal Article | Materials Today Communications | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Sensor to Electronics Applications of Graphene Oxide through AZO Grafting | Journal Article | Journal of Nanomaterials | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Biobased composites reinforced with annual plants—Design, manufacturing techniques, and parameters influencing the overall properties | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| A review on eco-friendly basalt fibers, their composites and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Biobased composites for advanced applications: Possibilities and difficulties on the path to circularity | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Advances in ceramic composites: Manufacture, performances, and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Additive manufacturing techniques, their challenges, and additively manufactured composites for advanced engineering applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Critical success factors for circular economy in the waste electrical and electronic equipment (WEEE) sector in an emerging economy: Implications for stakeholders | Journal Article | Journal of Cleaner Production | 2023 | Ms. Prattusha Bhattacharjee | Paper Link |
| Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Rafat Rahman | Paper Link |
| Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Sheak Salman | |
| Assessing the barriers to lean manufacturing adoption in the furniture industry of Bangladesh: a fuzzy-DEMATEL study | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Sheak Salman | Paper Link |
| An integrated approach to explore the barriers to lean manufacturing in the context of the COVID-19 pandemic: Implications for sustainability | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Mr. Sheak Salman | Paper Link |
| Municipal solid waste management: Identification and analysis of technology selection criteria using Fuzzy Delphi and Fuzzy DEMATEL technique | Journal Article | Heliyon | 2023 | Mr. Sheak Salman | Paper Link |
| Recent advances in applications of hybrid composites | Book | 2023 | Ms. Zaimaa Salsabil | ||
| Recent developments in functional plant fiber-based composites and their engineering applications | Book | 2023 | Ms. Zaimaa Salsabil | ||
| Advances in the performance of engineered cementitious composites under extreme conditions | Book | 2023 | Ms. Zaimaa Salsabil | ||
| Recycling of Plastic Polymer: Reinforcement of Building Material Using Polymer Plastics of Used COVID-19 Syringes | Journal Article | MDPI | 2023 | Mr. Golam Fahim | Paper Link |
| Phase change material-based rooftop on public transport for thermal management | Journal Article | Energy Storage and Saving | 2023 | Mr. Md. Araf Hossan | Paper Link |
| Analyzing the key barriers of adopting Industry 4.0 in Bangladesh’s ready-made garment industry: an emerging economy example | Journal Article | International Journal of Industrial Engineering and Operations Management | 2023 | Ms. Sadia Hasanat | |
| Mixed convection in an open T-shaped cavity utilizing the effect of different inflow conditions with Al2O3-water nanofluid flow | Journal Article | Results in Engineering | 2023 | Mr. Tahmidul Haque Ruvo | Paper Link |
| Energy consumption behavior analysis and experimental investigation of a novel technique for energy-efficient operation of submersible pumping system used in Barind Tract of Bangladesh | Journal Article | Energy Efficiency | 2023 | Mr. Md. Hasibul Hasan Himel | Paper Link |
| Phase Change Materials in Food Dryers | Others | 2023 | Mr. Md. Hasibul Hasan Himel | Paper Link | |
| An energy-efficient pumping system for sustainable cities and society: Optimization, mathematical modeling, and, impact assessment | Journal Article | Energy Reports | 2023 | Mr. Md. Hasibul Hasan Himel | Paper Link |
| Forced, natural and mixed convection of Non-Newtonian fluid flows in a square chamber with moving lid and discrete bottom heating | Journal Article | Results in Engineering | 2023 | Mr. Partha Pratim Roy | |
| Pure mixed convection in a Non-Newtonian fluid filled lid-driven chamber with discrete bottom heating | Journal Article | Case Studies in Thermal Engineering | 2023 | Mr. Partha Pratim Roy | |
| Overview of Bioceramics | Book | Advanced Bioceramics | 2023 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Annual Plant Reinforced Biocomposite Fiberboards—Investigation on Mechanical Properties | Book | Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives: Processing, Properties and Applications | 2023 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Processing of Bioceramics by Extrusion and Slip Casting | Book | Advanced Bioceramics | 2023 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys: A review | Journal Article | Journal of Magnesium and Alloys | 2023 | Mr. Chowdhury Ahmed Shahed | Paper Link |
| Interface and mechanical properties of graphene/copper composite with sonication induced Au decoration of graphene | Journal Article | Powder Technology | 2023 | Mr. Chowdhury Ahmed Shahed | |
| STUDY AND ANALYSIS OF METAL PARTS FABRICATED THROUGH FUSED DEPOSITION MODELLING, DE-BINDING AND SINTERING PROCESSES | Journal Article | Journal of Engineering Science and Technology | 2023 | Mr. Chowdhury Ahmed Shahed | |
| Microstructure and mechanical performance of low-cost biomedical-grade Titanium-316L alloy | Journal Article | Journal of Materials Research and Technology | 2023 | Mr. Chowdhury Ahmed Shahed | |
| Influence of Drilling Parameters on the Delamination and Surface Roughness of Insulative-Coated Glass/Carbon-Hybrid Composite | Journal Article | Advances in Polymer Technology | 2023 | Mr. Chowdhury Ahmed Shahed | |
| Review of the developments in composite materials over the last 15 years | Others | 2023 | Mr. Chowdhury Ahmed Shahed | Paper Link | |
| INVENTORY MANAGEMENT OF READYMADE GARMENT INDUSTRIES | Journal Article | Journal of Mechanical Engineering | 2022 | Prof. Dr. Mohammad Sarwar Morshed | |
| Barriers to achieving sustainability in pharmaceutical supply chains in the post-COVID-19 era | Journal Article | International Journal of Emerging Markets | 2022 | Prof. Dr. Mohammad Sarwar Morshed | Paper Link |
| Towards the Development of Compact and High Efficiency Adsorption Heat Pumps | Book | Rapid Refrigeration and Water Protection: Next Generation Adsorbents | 2022 | Dr. Mahbubul Muttakin | Paper Link |
| Mechanical and dynamic characteristics of double and single beam cantilevers for MEMS manipulation | Journal Article | Journal of Mechanical Science and Technology | 2022 | Dr. Fazlar Rahman | Paper Link |
| Influence of alkalisation and eggshell particles on mechanical, thermal and physical properties of rattan-bamboo fibre reinforced hybrid polyester laminated composite | Journal Article | ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES | 2022 | Dr. Fazlar Rahman | Paper Link |
| Investigation of fluid flow and heat transfer for an optimized lid driven cavity shape under the condition of inclined magnetic field | Journal Article | Energy and Thermofluids Engineering | 2022 | Dr. Fazlar Rahman | Paper Link |
| Numerical Analysis of Modified NACA 4412 Airfoil for Implementation of Low Reynolds Number VAWTs | Journal Article | Journal of Mechanical Engineering | 2022 | Dr. Fazlar Rahman | |
| Novel comparison concept between CBN and Al2O3 grinding process for eco-friendly production | Journal Article | Journal of Cleaner Production | 2022 | Dr. Mozammel Mia | Paper Link |
| Wetting transition of evaporating fakir drop on microstructured superhydrophobic surfaces: model development and validation in Surface Evolver. | Conference Proceedings | HEFAT-ATE | 2022 | Dr. Anjan Goswami | Paper Link |
| Characteristics of multiple droplet impacts on solid surfaces. | Conference Proceedings | ILASS Europe | 2022 | Dr. Anjan Goswami | |
| Simultaneous impact of two droplets on a solid Surface: central sheet evolution and splashing | Others | Bulletin of the American Physical Society | 2022 | Dr. Anjan Goswami | Paper Link |
| Sustainable supply chain in emerging economies during and post COVID-19 pandemic: a systematic literature review and future research directions | Journal Article | International Journal of Emerging Markets | 2022 | Mr. Sayem Ahmed | Paper Link |
| Multi-objective multi-echelon distribution planning for perishable goods supply chain: a case study | Journal Article | International Journal of Systems Science: Operations & Logistics | 2022 | Mr. Sayem Ahmed | Paper Link |
| Reducing plastic pollutants through catalyzing consumer roles: A novel application of fuzzy total interpretive structural modeling | Journal Article | Journal of Cleaner Production | 2022 | Mr. Sayem Ahmed | Paper Link |
| Air curtain in informal shopping malls: Optimization of the air curtain operating parameters for heat and smoke confinement | Journal Article | Energy and Buildings | 2022 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Sustainable supply chain in emerging economies during and post COVID-19 pandemic: A systematic literature review and future research directions | Journal Article | International Journal of Emerging Markets | 2022 | Ms. Humaira Nafisa Ahmed | Paper Link |
| Reducing plastic pollutants through catalyzing consumer roles: A novel application of fuzzy total interpretive structural modeling | Journal Article | Journal of Cleaner Production | 2022 | Ms. Humaira Nafisa Ahmed | Paper Link |
| Effects of Minimum Quantity Lubrication (MQL) on Surface Roughness in Milling Al Alloy 383 / ADC 12 Using Nano Hybrid Cutting Fluid | Journal Article | EVERGREEN - Joint Journal of Novel Carbon Sciences and Green Asia Strategy | 2022 | Mr. Md. Sazzad Hossain Ador | Paper Link |
| Solar thermal energy conversion | Book | 2022 | Mr. Mohsan Uddin Ahmad | ||
| Numerical investigation of wave impact characteristics on a vertical wall for the oscillating piston-type wave generator | Journal Article | International Journal of Energy and Water Resources | 2022 | Mr. Badhan Saha | Paper Link |
| MACHINING PARAMETERS OPTIMIZATION FOR TURNING OPERATION FOR AL ALLOY 4343 ON VERTICAL CNC MILLING MACHINE USING TAGUCHI ANALYSIS AND GENETIC ALGORITHM | Journal Article | Journal of Mechanical Engineering | 2022 | Mr. Zahid Hasan Shuvo | |
| Optimization of Turning Parameters to Improve Surface Roughness and Material Removal Rate of AA 7XXX: A Taguchi Approach | Journal Article | Recent Trends in Production Engineering | 2022 | Mr. Zahid Hasan Shuvo | |
| Microstructural study of SME manufactured marine propeller, | Conference Proceedings | 7th International Conference on Mechanical, Industrial, and Energy Engineering, 22-24 Dec | 2022 | Dr. Md. Shahnewaz Bhuiyan | |
| Mechanical Characterization of Jute-Glass fiber reinforced composite: Effect of UV-C radiation on hybrid composites | Journal Article | Journal of Mechanical Engineering | 2022 | Dr. Md. Shahnewaz Bhuiyan | |
| A Cloud-Based Cyber-Physical System with Industry 4.0: Remote and Digitized Additive Manufacturing | Journal Article | Automation | 2022 | Dr. Muhommad Azizur Rahman | Paper Link |
| Impact of Additive Manufacturing on the Supply Chain of Aerospace Spare Parts Industry—A Review | Journal Article | Logistics | 2022 | Dr. Muhommad Azizur Rahman | Paper Link |
| Cutting edge radius effect on the surface integrity of orthogonal turned aluminium alloy Al6082 with different initial microstructure | Journal Article | Procedia CIRP | 2022 | Dr. Muhommad Azizur Rahman | Paper Link |
| Polishing of additive manufactured metallic components: retrospect on existing methods and future prospects | Journal Article | The International Journal of Advanced Manufacturing Technology | 2022 | Dr. Muhommad Azizur Rahman | Paper Link |
| Recent Trends in Arc Machining Processes | Book | In book: Electric Discharge Hybrid-Machining Processes | 2022 | Dr. Muhommad Azizur Rahman | Paper Link |
| Influence of alkalisation and eggshell particles on mechanical, thermal and physical properties of rattan-bamboo fibre reinforced hybrid polyester laminated composite | Journal Article | Advances in Materials and Processing Technologies | 2022 | Mr. Shadman Sharar Alam | Paper Link |
| Polymer nanocomposites for automotive applications | Book | Advanced Polymer Nanocomposites | 2022 | Mr. Sazedur Rahman | Paper Link |
| Novel Design and Construction of an Open Circuit Subsonic Wind Tunnel with Performance Test | Journal Article | Recent Trends in Production Engineering | 2022 | Mr. Sazedur Rahman | Paper Link |
| Barriers to achieving sustainability in pharmaceutical supply chains in the post-COVID-19 era | Journal Article | International Journal of Emerging Markets | 2022 | Ms. Sharmine Akther Liza | Paper Link |
| Barriers to achieving sustainability in pharmaceutical supply chains in the post-COVID-19 era | Journal Article | International Journal of Emerging Markets | 2022 | Mr. Naimur Rahman Chowdhury | Paper Link |
| Improving the Benefits and Cost of Using Emerging Technologies for Sustainable Recovery from COVID-19 in Manufacturing Industries | Journal Article | Frontiers in Environmental Science | 2022 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| What are the challenges that make the journey towards industrial symbiosis complicated? | Journal Article | Journal of Cleaner Production | 2022 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Effects of Asymmetric Channel on the Convective Heat Transfer: A Computational Study | Journal Article | Energy and Thermofluids Engineering | 2022 | Dr. Abu Hamja | Paper Link |
| Effects of Minimum Quantity Lubrication (MQL) on Surface Roughness in Milling Al Alloy 383 / ADC 12 Using Nano Hybrid Cutting Fluid | Journal Article | EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy | 2022 | Mr. A K M Sarower Kabir | |
| Synergistic effects of tubular halloysite clay and zirconium phosphate on thermal behavior of intumescent coating for structural steel | Journal Article | Journal of Materials Research and Technology | 2022 | Mr. A K M Sarower Kabir | Paper Link |
| Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: A review | Journal Article | Journal of Materials Research and Technology | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Numerical investigation of heat transfer performance for rectangular, elliptical, and airfoil shaped pin fin heatsinks through the novel combination of perforation and bulge inserts | Journal Article | International Communications in Heat and Mass Transfer | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Experimental and numerical study on a new floor heating system using carbon fiber tape embedded in cement mortar | Journal Article | Journal of Building Engineering | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Tensile properties deterioration of BFRP bars in simulated pore solution and real seawater sea sand concrete environment with varying alkalinities | Journal Article | Composites Part B: Engineering | 2022 | Dr. Md Zillur Rahman | Paper Link |
| A state-of-the-art review on mechanical performance characterization and modelling of high-performance textile reinforced concretes | Journal Article | Construction and Building Materials | 2022 | Dr. Md Zillur Rahman | Paper Link |
| A review on mechanical properties and deterioration mechanisms of FRP bars under severe environmental and loading conditions | Journal Article | Cement and Concrete Composites | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Face Masks to Combat Coronavirus (COVID-19)—Processing, Roles, Requirements, Efficacy, Risk and Sustainability | Journal Article | Journal of Polymers | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Solar drying system | Book | In Book: Technologies for Solar Thermal Energy: Theory, Design and Optimization | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Influences of surface treatment on the mechanical performances of carbon and basalt textiles-reinforced concretes under harsh environments | Journal Article | Composites Part B: Engineering | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Static and dynamic tensile behaviors of BFRP bars embedded in seawater sea sand concrete under marine environment | Journal Article | Composites Part B: Engineering | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Mitigating the deterioration of BFRP bars in seawater sea sand mortar by reducing alkalinity | Journal Article | Journal of Construction and Building Materials | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Aging Effects on Mechanical Properties of Biocomposites with Recycled Polymers | Book | In Book: Aging Effects on Natural Fiber-reinforced Polymer Composites: Durability and Life Prediction | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Influence of Fiber Treatment on the Damping Performance of Plant Fiber Composites | Book | In Book: Vibration and Damping Behavior of Biocomposites | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Influence of Moisture Absorption on Physico-Chemical Properties of Natural Fiber-based Hybrid Composites | Book | In Book: Aging Effects on Natural Fiber-Reinforced Polymer Composites: Durability and Life Prediction | 2022 | Dr. Md Zillur Rahman | Paper Link |
| What are the challenges that make the journey towards industrial symbiosis complicated? | Journal Article | Journal of Cleaner Production | 2022 | Ms. Prattusha Bhattacharjee | Paper Link |
| Barriers to achieving sustainability in pharmaceutical supply chains in the post-COVID-19 era | Journal Article | International Journal of Emerging Markets | 2022 | Mr. Shah Murtoza Morshed | Paper Link |
| Improving the Benefits and Cost of Using Emerging Technologies for Sustainable Recovery from COVID-19 in Manufacturing Industries | Journal Article | Frontiers in Environmental Science, section Environmental Economics and Management | 2022 | Mr. Sheak Salman | Paper Link |
| Behavioural factors for Industry 4.0 adoption: implications for knowledge-based supply chains | Journal Article | Operations Management Research | 2022 | Mr. Sheak Salman | Paper Link |
| What are the challenges that make the journey towards Industrial Symbiosis complicated? | Journal Article | Journal of Cleaner Production | 2022 | Mr. Sheak Salman | Paper Link |
| Technical challenges in scaling up the microwave technology for biomass processing | Journal Article | Renewable and Sustainable Energy Reviews | 2022 | Dr. Istiaq Jamil Siddique | Paper Link |
| Unraveling the metallic thermocouple effects during microwave heating of biomass | Journal Article | Energy | 2022 | Dr. Istiaq Jamil Siddique | Paper Link |
| Numerical Approach in Determination of Thermophysical Material Properties in Decomposition of Lumpy Dolomite Particles | Conference Proceedings | International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT'22) | 2022 | Mr. Md. Ishtiaque Hossain | Paper Link |
| Estimation of machining responses in hard turning under dry and HPC conditions using different AI based and statistical techniques | Journal Article | International Journal on Interactive Design and Manufacturing (IJIDeM) | 2022 | Ms. Rafat Tabassum Sukonna | |
| Entropy generation and natural convection on a cubic cavity with a pair of heat source at different configurations | Journal Article | International Communications in Heat and Mass Transfer | 2022 | Mr. Tahmidul Haque Ruvo | Paper Link |
| Analysis of conjugate Marangoni natural convection in a heating system with an open boundary flow | Journal Article | International Communications in Heat and Mass Transfer | 2022 | Mr. Tahmidul Haque Ruvo | Paper Link |
| Energy Consumption Behavior Analysis and Investigation of Submersible Pumping System Efficiency in Different Bore well at Barind tract of Bangladesh | Conference Proceedings | International Conference on Mechanical, Manufacturing and Process Engineering (ICMMPE), 25-27 June 2022 | 2022 | Mr. Md. Hasibul Hasan Himel | |
| An Incineration Method to Produce Energy from Waste in Rajshahi City, Bangladesh | Conference Proceedings | International Conference in Industrial and Mechanical Engineering and Operations Management (IMEOM) | 2022 | Mr. Ahtashamul Haque | Paper Link |
| Analyzing Musculoskeletal Disorders in Farmers Involved in Cultivation of Rice in Selected Villages of Bangladesh | Conference Proceedings | 5th International Conference in Industrial and Mechanical Engineering and Operations Management (IMEOM) | 2022 | Mr. Rafid Ahmed Chowdhury | Paper Link |
| Polymer nanocomposites for automotive applications | Book | Advanced Polymer Nanocomposites | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| CO2 Conversion to Chemicals and Fuel Cells Using Renewable Energy Sources | Book | 2D Nanomaterials for CO2 Conversion into Chemicals and Fuels | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Free vibration and damping properties of the pineapple leaf fiber-and sisal fiber-based polymer composites | Book | Vibration and Damping Behavior of Biocomposites | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Effect of corrugated pipe on laminar convective heat transfer by using SWCNT nanofluid: a numerical study | Journal Article | Latin American Applied Research-An international journal | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Synthesis of Two-dimensional Hybrid Materials, Unique Properties, and Challenges | Book | 2D Nanomaterials for CO2 Conversion into Chemicals and Fuels | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Preparation and Characterization of leather Buffing Dust Filled Thermoplastic Composite | Journal Article | Journal of Mechanical Engineering | 2021 | Prof. Dr. Mohammad Sarwar Morshed | |
| Intelligent Vehicle Scheduling and Routing for a Chain of Retail Stores: A case study of Dhaka, Bangladesh | Journal Article | Logistics | 2021 | Prof. Dr. Mohammad Sarwar Morshed | Paper Link |
| Occupational safety and health and productivity in the garment industry – contradictory or complementary? | Book | 2021 | Prof. Dr. Mohammad Sarwar Morshed | ||
| A critical overview of adsorption kinetics for cooling and refrigeration systems | Journal Article | Advances in Colloid and Interface Science | 2021 | Dr. Mahbubul Muttakin | Paper Link |
| Study on optimized adsorption chiller employing various heat and mass recovery schemes | Journal Article | International Journal of Refrigeration | 2021 | Dr. Mahbubul Muttakin | Paper Link |
| Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool | Journal Article | Sustainability | 2021 | Mr. Rezaul Karim Nayeem | Paper Link |
| Investigation of Surface Roughness in MQL Aided Turning of AlCuZr Alloy using PCD Tool | Conference Proceedings | Intelligent Manufacturing and Energy Sustainability | 2021 | Mr. Rezaul Karim Nayeem | Paper Link |
| Minimizing Surface Driving and Disturbance Forces in MEMS's Microstructure-A Review | Journal Article | Annals of Engineering | 2021 | Dr. Fazlar Rahman | |
| Numerical Analysis of Reaction Forces at the Supports of Sliding Microwire | Journal Article | Journal of Mechanical Engineering and Sciences | 2021 | Dr. Fazlar Rahman | Paper Link |
| Turbulent heat transfer enhancement in tubular heat exchangers with different twisted tape inserts | Journal Article | Journal of Mechanical Engineering and Sciences | 2021 | Mr. Md. Jubayer Hossain | Paper Link |
| Design Optimization of Supercritical Carbon Dioxide (s-CO2) Cycles for Waste Heat Recovery From Marine Engines | Journal Article | Journal of Energy Resources Technology | 2021 | Mr. Md. Jubayer Hossain | Paper Link |
| Enhancement of Pool Boiling Heat Transfer over Plain and Rough Cylindrical Tubes | Journal Article | International Journal of Heat and Technology | 2021 | Mr. Md. Jubayer Hossain | Paper Link |
| Development of process performance simulator (PPS) and parametric optimization for sustainable machining considering carbon emission, cost and energy aspects | Journal Article | Renewable and Sustainable Energy Reviews | 2021 | Dr. Mozammel Mia | Paper Link |
| Swarm intelligence based selection of optimal end-milling parameters under minimum quantity nano-green lubricating environment | Journal Article | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science | 2021 | Dr. Mozammel Mia | Paper Link |
| Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review | Journal Article | Journal of Manufacturing Processes | 2021 | Dr. Mozammel Mia | Paper Link |
| Multi-response optimization of the actively driven rotary turning for energy efficiency, carbon emissions, and machining quality | Journal Article | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | 2021 | Dr. Mozammel Mia | Paper Link |
| Investigation of surface modification and tool wear on milling Nimonic 80A under hybrid lubrication | Journal Article | Tribology International | 2021 | Dr. Mozammel Mia | Paper Link |
| Improvement of machinability of Ti and its alloys using cooling-lubrication techniques: a review and future prospect | Journal Article | Journal of Materials Research and Technology | 2021 | Dr. Mozammel Mia | Paper Link |
| Surface modification for osseointegration of Ti6Al4V ELI using powder mixed sinking EDM | Journal Article | Journal of the Mechanical Behavior of Biomedical Materials | 2021 | Dr. Mozammel Mia | Paper Link |
| Modeling and Optimization Algorithms in Rapid Prototyping, Submerged Arc Welding, and Turning | Book | Modeling and Optimization in Manufacturing: Toward Greener Production by Integrating Computer Simulation | 2021 | Dr. Mozammel Mia | |
| Investigation on Mechanical, Tribological and Microstructural properties of Al-Mg-Si-T6/SiC/Muscovite-hybrid metal-matrix composites for high strength applications | Journal Article | Journal of Materials Research and Technology | 2021 | Dr. Mozammel Mia | Paper Link |
| Machine-learning for automatic prediction of flatness deviation considering the wear of the face mill teeth | Journal Article | Journal of Intelligent Manufacturing | 2021 | Dr. Mozammel Mia | Paper Link |
| Metrological analysis of surface quality aspects in minimum quantity cooling lubrication | Journal Article | Measurement | 2021 | Dr. Mozammel Mia | Paper Link |
| Energy, Environmental, Economic, and Technological Analysis of Al-GnP Nanofluid- and Cryogenic LN2-Assisted Sustainable Machining of Ti-6Al-4V Alloy | Journal Article | Metals | 2021 | Dr. Mozammel Mia | Paper Link |
| Performance Assessment of Minimum Quantity Castor-Palm Oil Mixtures in Hard-Milling Operation | Journal Article | Materials | 2021 | Dr. Mozammel Mia | Paper Link |
| Recent developments in fire retardant glass fibre reinforced epoxy composite and geopolymer as a potential fire-retardant material: A review | Journal Article | Construction and Building Materials | 2021 | Dr. Mozammel Mia | Paper Link |
| Investigation of microstructure, mechanical and machinability properties of Mo-added steel produced by powder metallurgy method | Journal Article | The International Journal of Advanced Manufacturing Technology | 2021 | Dr. Mozammel Mia | Paper Link |
| Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy | Journal Article | Tribology International | 2021 | Dr. Mozammel Mia | Paper Link |
| Investigation into the surface quality and stress corrosion cracking resistance of AISI 316L stainless steel via precision end-milling operation | Journal Article | The International Journal of Advanced Manufacturing Technology | 2021 | Dr. Mozammel Mia | Paper Link |
| The effects of through tool cryogenic machining on the hole quality in GLARE® fibre metal laminates | Journal Article | Journal of Manufacturing Processes | 2021 | Dr. Mozammel Mia | Paper Link |
| Investigation on the mechanical, tribological, morphological and machinability behavior of stir-casted Al/SiC/Mo reinforced MMCs | Journal Article | Journal of Materials Research and Technology | 2021 | Dr. Mozammel Mia | Paper Link |
| Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti–6Al–4V alloy | Journal Article | Tribology International | 2021 | Dr. Mozammel Mia | Paper Link |
| Episodes of chip formation in micro-to-nanoscale cutting of Inconel 625 | Journal Article | International Journal of Mechanical Sciences | 2021 | Dr. Mozammel Mia | Paper Link |
| Influence of Feed Rate Response (FRR) on Chip Formation in Micro and Macro Machining of Al Alloy | Journal Article | Metals | 2021 | Dr. Mozammel Mia | Paper Link |
| Effects of calcium-treatment of a plastic injection mold steel on the tool wear and power consumption in slot milling | Journal Article | Journal of Materials Research and Technology | 2021 | Dr. Mozammel Mia | Paper Link |
| A hybrid approach of cooling lubrication for sustainable and optimized machining of Ni-based industrial alloy | Journal Article | Journal of Cleaner Production | 2021 | Dr. Mozammel Mia | Paper Link |
| Evaluation of machinability-based sustainability indicators in the eco-benign turning of Ti3Al2.5V alloy with textured tools | Journal Article | The International Journal of Advanced Manufacturing Technology | 2021 | Dr. Mozammel Mia | Paper Link |
| Effect of ball-milling process parameters on mechanical properties of Al/Al2O3/collagen powder composite using statistical approach | Journal Article | Journal of Materials Research and Technology | 2021 | Dr. Mozammel Mia | Paper Link |
| Parametric Optimization for Improving the Machining Process of Cu/Mo-SiCP Composites Produced by Powder Metallurgy | Journal Article | Materials | 2021 | Dr. Mozammel Mia | Paper Link |
| Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800 | Journal Article | Journal of Cleaner Production | 2021 | Dr. Mozammel Mia | Paper Link |
| EFFECT OF FIBER LOADING AND ORIENTATION ON MECHANICAL AND THERMAL PROPERTIES OF JUTE-POLYESTER LAMINATED COMPOSITE | Journal Article | Journal of Natural Fibers, Taylor & Francis | 2021 | Mr. Md. Merajul Haque | |
| AN EXPERIMENTAL STUDY OF PHYSICAL, MECHANICAL, AND THERMAL PROPERTIES OF RATTAN-BAMBOO FIBER REINFORCED HYBRID POLYESTER LAMINATED COMPOSITE | Journal Article | Journal of Natural Fibers, Taylor & Francis | 2021 | Mr. Md. Merajul Haque | |
| Enhancement of pool boiling heat transfer over plain and rough cylindrical tubes. | Journal Article | International Journal of Heat and Technology | 2021 | Dr. Anjan Goswami | Paper Link |
| Simultaneous impact of multiple droplets on a solid surface. | Conference Proceedings | Micro and Nano Flows | 2021 | Dr. Anjan Goswami | |
| Turbulent heat transfer enhancement in tubular heat exchangers with different twisted tape inserts. | Journal Article | Journal of Mechanical Engineering and Sciences | 2021 | Dr. Anjan Goswami | Paper Link |
| Challenges to COVID-19 vaccine supply chain: Implications for sustainable development goals | Journal Article | International Journal of Production Economics | 2021 | Mr. Sayem Ahmed | Paper Link |
| Addressing critical success factors for improving concurrent emergency management: lessons learned from the COVID-19 pandemic | Journal Article | Annals of Operations Research | 2021 | Mr. Sayem Ahmed | Paper Link |
| Evaluation of Flexible Strategies to Manage the COVID-19 Pandemic in the Education Sector | Journal Article | Global Journal of Flexible Systems Management | 2021 | Mr. Sayem Ahmed | Paper Link |
| Effect of an Upstream Extended Surface on Reduction of Total Drag for Finite Cylinders in Turbulent Flow | Journal Article | International Journal of Fluid Mechanics Research | 2021 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Improvement of heat and smoke confinement using air curtains in informal shopping malls | Journal Article | Journal of Building Engineering | 2021 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Turbulent Heat Transfer Enhancement in Tubular Heat Exchangers with Different Twisted Tape Inserts | Journal Article | Journal of Mechanical Engineering and Sciences | 2021 | Mr. Sadman Hassan Labib | Paper Link |
| Enhancement of Pool Boiling Heat Transfer over Plain and Rough Cylindrical Tubes | Journal Article | International Journal of Heat and Technology | 2021 | Mr. Sadman Hassan Labib | Paper Link |
| Computational and Experimental Study of Frequency Dependent Impedance Response of Epoxy-Tin Composite | Journal Article | IOSR Journal of Mechanical and Civil Engineering | 2021 | Mr. Sadman Hassan Labib | Paper Link |
| A supply chain disruption risk mitigation model to manage COVID-19 pandemic risk | Journal Article | Environmental Science and Pollution Research | 2021 | Mr. Kazi Safowan Shahed | Paper Link |
| Performance Analysis of a Low Head Water Vortex Turbine | Journal Article | MIST International Journal of Science and Technology | 2021 | Mr. Badhan Saha | Paper Link |
| Optimization of Thermal Performance of a Segmental Baffle Shell and Tube Heat Exchanger under Different Baffle Spaces and Baffle Numbers: A Numerical Case Study Using CFD | Journal Article | Journal of Advanced Research in Industrial Engineering | 2021 | Mr. Badhan Saha | Paper Link |
| Impact of Baffle Spaces and Baffle Numbers on Pressure Drop and Heat Transfer in a Shell and Tube Heat Exchanger: A CFD Analysis | Journal Article | Advancement in Mechanical Engineering and Technology | 2021 | Mr. Badhan Saha | Paper Link |
| A Taguchi Approached Comparative Study on Inventory Cost Optimization Considering Shortage and Backlogging Cost for Perishable Products | Journal Article | Journal of Advanced Research in Industrial Engineering | 2021 | Mr. Zahid Hasan Shuvo | |
| Combined Business Strategy in Coastal Area after Covid-19 Situation A Case Study in Cox’s Bazar | Journal Article | International Journal of Students’ Research in Technology & Management | 2021 | Mr. Zahid Hasan Shuvo | |
| Design and Development of Automatic Sieving Machine for Granular/Powder Materials | Journal Article | Recent Trends in Automation and Automobile Engineering | 2021 | Mr. Zahid Hasan Shuvo | |
| Optimization of Inventory Total Cost Equation Considering both Shortage and Backlogging Cost by Taguchi Analysis | Journal Article | Recent Trends in Production Engineering | 2021 | Mr. Zahid Hasan Shuvo | |
| Comparative Analysis on the Effect of Minimum Quantity Lubrication and Chilled Air Cooling During Turning Hardened Stainless Steel | Book | Intelligent Manufacturing and Energy Sustainability | 2021 | Ms. Mahjabin Moon | |
| Microstuctural study of LES manufactured part for understanding the predictive capabilities under service load | Journal Article | Journal of Mechanical Engineering | 2021 | Dr. Md. Shahnewaz Bhuiyan | |
| Microstructural Evaluation of Local LES Manufactured Piston | Others | 4th International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), December 26-27, 2021, Dhaka, Bangladesh | 2021 | Dr. Md. Shahnewaz Bhuiyan | |
| An Intelligent Cyber-Physical System of Machining Operation for Industry 4.0 | Others | 4th International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), December 26-27, 2021, Dhaka, Bangladesh | 2021 | Dr. Md. Shahnewaz Bhuiyan | |
| Comparison of local SME manufactured Al-ally automotive piston in Bangladesh with imported counterparts by microstructural and chemical characterization | Journal Article | IOSR Journal of Mechanical and Civil Engineering (ISOR-JMCE) | 2021 | Dr. Md. Shahnewaz Bhuiyan | |
| Tensile Behavior of Geometrically Irregular Bagasse Fiber | Journal Article | Applied Mechanics | 2021 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Influence of Feed Rate Response (FRR) on Chip Formation in Micro and Macro Machining of Al Alloy | Journal Article | Metals- | 2021 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Examining risks and strategies for the spice processing supply chain in the context of an emerging economy | Journal Article | International Journal of Emerging Markets | 2021 | Mr. Kazi Wahadul Hasan | Paper Link |
| Integrated economic design of quality control and maintenance management: Implications for managing manufacturing process | Journal Article | International Journal of System Assurance Engineering and Management | 2021 | Mr. Kazi Wahadul Hasan | Paper Link |
| Application of nature inspired algorithms for multi-objective inventory control scenarios | Journal Article | International Journal of Industrial Engineering Computations | 2021 | Ms. Mahjabin Rahman | |
| PLC Based Monitoring and Prediction: A Case Study of Injection Molding | Conference Proceedings | 4th International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), 2021 | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Advanced cooling-lubrication technologies in metal machining | Book | Machining and Tribology : Processes, Surfaces, Coolants, and Modeling (1st Edition ) | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Python in Predicting Mechanical Properties of FDM 3D Printed Parts Based on PLA | Conference Proceedings | 4th International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), 2021 | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Microstructural evaluation of local LES manufactured Piston | Conference Proceedings | 4th International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), 2021 | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Intelligent Vehicle Scheduling and Routing for a Chain of Retail Stores: A Case Study of Dhaka, Bangladesh | Journal Article | Logistics | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| An Intelligent Cyber Physical System of Machining Operation for Industry 4.0 | Conference Proceedings | 4th International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), 2021 | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Study the effect of different parameters on Stringing Issues In Additive Manufacturing by FDM | Conference Proceedings | International Conference on Automation, Control and Mechatronics for Industry 4.0 (ACMI), 8-9 July 2021, Rajshahi, Bangladesh | 2021 | Dr. Muhommad Azizur Rahman | |
| A Cyber Physical Industry 4.0 Framework of Image Based Defect Detection for Additive Manufacturing | Conference Proceedings | 6th Internationl conference on Computer, Communication, Chemical, Materials & Electronic Engineering (IC4ME2) 2021 | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Web-Based Networking Process of Supply Chain in Additive Manufacturing | Conference Proceedings | 4th International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), 2021 | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Episodes of chip formation in micro-to-nanoscale cutting of Inconel 625 | Journal Article | International Journal of Mechanical Sciences | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Trends in electrical discharge machining of Ti- and Ni-based superalloys: macro-micro-compound arc/spark/melt process | Book | Micro Electro-Fabrication | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Tensile Behavior of Geometrically Irregular Bagasse Fiber | Journal Article | Applied Mechanics | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Investigation of surface modification and tool wear on milling Nimonic 80A under hybrid lubrication | Journal Article | Tribology International | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| The influence of feed rate response (FRR) on chip formation in micro and macro machining of Al alloy | Journal Article | Metals | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Investigation on the Mechanical, Tribological, Morphological and Machinability behavior of stir-casted Al/SiC/Mo reinforced MMCs | Journal Article | Journal of Materials Research and Technology | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| FDM 3D Printing Challenges and Opportunities for Industry 4.0 in Bangladesh | Conference Proceedings | International Conference on Science and Technology for Celebrating the Birth Centenary of Bangabandhu (ICSTB-2021) | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Recycle of plastic waste by additive manufacturing with industry 4.0 | Conference Proceedings | International Conference on Science and Technology for Celebrating the Birth Centenary of Bangabandhu (ICSTB-2021) | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Comparison of local SME manufactured automotive parts in Bangladesh with imported counterparts by microstructural characterization | Conference Proceedings | International Conference on Science and Technology for Celebrating the Birth Centenary of Bangabandhu (ICSTB-2021) | 2021 | Dr. Muhommad Azizur Rahman | Paper Link |
| Optimization of Thermal Performance of a Segmental Baffle Shell and Tube Heat Exchanger under Different Baffle Spaces and Baffle Numbers: A Numerical Case Study Using CFD | Journal Article | Journal of Advanced Research in Industrial Engineering | 2021 | Mr. Md. Tofazzal Hossain | Paper Link |
| Impact of Baffle Spaces and Baffle Numbers on Pressure Drop and Heat Transfer in a Shell and Tube Heat Exchanger: A CFD Analysis | Journal Article | Advancement in Mechanical Engineering and Technology | 2021 | Mr. Md. Tofazzal Hossain | Paper Link |
| Simulation on Mechanical Heart valve: Generative Design and Blood Flow Analysis of a Mechanical Heart Valve | Conference Proceedings | International Conference on Industrial & Mechanical Engineering and Operations Management | 2021 | Mr. Aquib Rahman | Paper Link |
| Effect of Different Fibers Loading on Palm and Aramid Fiber Reinforced Hybrid Epoxy Composite | Journal Article | Advances in Materials and Processing Technologies | 2021 | Mr. Shadman Sharar Alam | Paper Link |
| Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) | Journal Article | Computational Engineering and Physical Modeling | 2021 | Mr. Sazedur Rahman | Paper Link |
| Assessing Performance and Improving Productivity Through Identification of Sewing Defects: A Multi Criteria Based Case Study in an Apparel Firm in Bangladesh | Conference Proceedings | In Proceedings of the 2nd South American International Conference on Industrial Engineering and Operations Management | 2021 | Ms. Sharmine Akther Liza | Paper Link |
| Recognizing Critical Drivers to Mitigate Supply Chain Disruptions in Pharmaceutical Industry During COVID-19 | Conference Proceedings | In Proceedings of the 2nd South American International Conference on Industrial Engineering and Operations Management | 2021 | Ms. Sharmine Akther Liza | Paper Link |
| Assessing Performance and Improving Productivity Through Identification of Sewing Defects: A Multi Criteria Based Case Study in an Apparel Firm in Bangladesh | Conference Proceedings | 2nd South American International Conference on Industrial Engineering and Operations ManagementAt: Sao Paulo, Brazil | 2021 | Mr. Naimur Rahman Chowdhury | |
| Recognizing Critical Drivers to Mitigate Supply Chain Disruptions in Pharmaceutical Industry During COVID-19 | Conference Proceedings | 2nd South American International Conference on Industrial Engineering and Operations ManagementAt: Sao Paulo, Brazil | 2021 | Mr. Naimur Rahman Chowdhury | |
| Assessing Disruptive Crises of Supply Chain in Firms Amidst COVID-19: An application of Multi Category-SVM using k-means Clustering | Conference Proceedings | 2nd South American International Conference on Industrial Engineering and Operations Management, Sao Paulo, BrazilAt: Brazil | 2021 | Mr. Naimur Rahman Chowdhury | |
| Evaluation of Flexible Strategies to Manage the COVID-19 Pandemic in the Education Sector | Journal Article | Global Journal of Flexible Systems Management | 2021 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Addressing critical success factors for improving concurrent emergency management: lessons learned from the COVID-19 pandemic | Journal Article | Annals of Operations Research | 2021 | Ms. Aliza Sharmin | Paper Link |
| Reducing plastic pollutants through catalyzing consumer roles: A novel application of fuzzy total interpretive structural modeling | Journal Article | Journal of Cleaner Production | 2021 | Ms. Aliza Sharmin | Paper Link |
| Complementarities between Operations and Occupational Health and Safety in Garments | Journal Article | Sustainability | 2021 | Dr. Abu Hamja | Paper Link |
| Transfer mechanisms for lean implementation with OHS integration in the garment industry | Journal Article | International Journal of Productivity and Performance Management | 2021 | Dr. Abu Hamja | Paper Link |
| Addressing critical success factors for improving concurrent emergency management: lessons learned from the COVID-19 pandemic | Journal Article | Annals of Operations Research | 2021 | Mr. Md. Adib Rahman | Paper Link |
| Effects of Waste Glass Powder Filler on Intumescent Coating for Steel Structures Application, IOP Conference Series: Materials Science and Engineering, Vol. 1176(1) 2021 | Journal Article | 2021 | Mr. A K M Sarower Kabir | Paper Link | |
| Analysis of Thermal Performance of Mica-Mineral Reinforced Intumescent Coating for Structural Steel Application, Transdisciplinary Research and Education Center for Green Technologies, Kyushu University, 2021 | Journal Article | 2021 | Mr. A K M Sarower Kabir | Paper Link | |
| Fire-Resistant Properties of Modified Epoxy Based Intumescent Fire-Retardant Coating: Hybridizing of Oyster Shell Powder with Glass Frit, IOP Conference Series: Materials Science and Engineering, Vo. 1176 (1), 2021 | Journal Article | 2021 | Mr. A K M Sarower Kabir | Paper Link | |
| A review on the tensile behavior of fiber-reinforced polymer composites under varying strain rates and temperatures | Journal Article | Journal of Construction and Building Materials | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Mechanical and damping performances of flax fibre composites – A review | Journal Article | Journal of Composites Part C: Open Access | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Effect of alkalinity on the shear performance degradation of basalt fiber-reinforced polymer bars in simulated seawater sea sand concrete environment | Journal Article | Journal of Construction and Building Materials | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Transverse low-velocity impact performance of BFRP bars after exposure to the saline-alkaline environment | Journal Article | Journal of Construction and Building Materials | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Preparation of nano-xylan and its influences on the anti-fungi performance of straw fiber/HDPE composite | Journal Article | Journal of Industrial Crops and Products | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Structural and mechanical properties of fish scales for the bio-inspired design of flexible body armors: A review | Journal Article | Journal of Acta Biomaterialia | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool | Journal Article | Sustainability | 2021 | Mr. Shah Murtoza Morshed | Paper Link |
| Investigation of Surface Roughness in MQL Aided Turning of Al/Cu/Zr Alloy Using PCD Tool | Book | Intelligent Manufacturing and Energy Sustainability: Proceedings of ICIMES 2020 | 2021 | Mr. Shah Murtoza Morshed | Paper Link |
| Evaluation of Flexible Strategies to Manage the COVID-19 Pandemic in the Education Sector. | Journal Article | Global Journal of Flexible Systems Management | 2021 | Mr. Mohiuddin Sarker | Paper Link |
| Reducing plastic pollutants through catalyzing consumer roles: A novel application of fuzzy total interpretive structural modeling | Journal Article | Journal of Cleaner Production | 2021 | Mr. Rafat Rahman | Paper Link |
| Parametric Optimization in Powder-Mixed Electric Discharge Machining of Titanium Alloy | Conference Proceedings | Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2021 (ICMERE 2021) 12 – 14 December 2021, Chattogram, Bangladesh | 2021 | Mr. Sheak Salman | |
| Investigation of Surface Roughness in MQL Aided Turning of Al/Cu/Zr Alloy using PCD Tool | Conference Proceedings | Springer Link | 2021 | Mr. Md. Sabbir Hossain Shawon | Paper Link |
| Environmental, Economical and Technological Analysis of MQL-Assisted Machining of Al-Mg-Zr Alloy Using PCD Tool | Journal Article | Sustainability - MDPI | 2021 | Mr. Md. Sabbir Hossain Shawon | Paper Link |
| Inventory Management of Readymade Garment Industries | Journal Article | JOURNAL OF MECHANICAL ENGINEERING | 2021 | Ms. Afia Ahsan | |
| Performance Investigation of Submersible Pumping System Using Mechanical Devices in Different Bore Well | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy (ICMERE), 12-14 December 2021, Chattogram, Bangladesh | 2021 | Mr. Md. Hasibul Hasan Himel | |
| Mathematical modelling and exergo-environmental analysis of drying potato samples in a waste heat-based convective dryer | Journal Article | Environmental Challenges | 2021 | Mr. Md. Hasibul Hasan Himel | Paper Link |
| Analyzing Musculoskeletal Discomforts of the Selected Bangladeshi University Students Using Laptops | Conference Proceedings | Proceedings of the International Conference on Industrial & Mechanical Engineering and Operations Management (IMEOM 2021); Held: December 26-27, 2021, Dhaka, Bangladesh | 2021 | Mr. Qawsar Ali | Paper Link |
| A Relative Comparison Between Transmission Dynamic and Exponential Growth Model of Covid19 In SAARC Affiliated Countries | Conference Proceedings | 6th International Conference On Engineering Research, Innovation and Education (ICERIE 2021) Held: 26-28 February 2021, Sylhet, Bangladesh | 2021 | Mr. Qawsar Ali | |
| Prioritizing Suppliers by using AHP tool for managing risk factors in Logistics | Conference Proceedings | 1st International Conference on Industrial and Mechanical Engineering and Operations Management | 2020 | Prof. Dr. Mohammad Sarwar Morshed | |
| Methodology for Baseline and Intervention Study - Project: Productivity and occupational health and safety in the garment industry in Bangladesh (POHS-BD) | Book | 2020 | Prof. Dr. Mohammad Sarwar Morshed | ||
| Computational fluid dynamics modelling of the visible light photocatalytic oxidation process of toluene for indoor building materials with locally doped titanium dioxide | Journal Article | Indoor and Built Environment | 2020 | Dr. Mahbubul Muttakin | Paper Link |
| Study of Surface Roughness and MRR in Turning of SiC Reinforced Al Alloy Composite Using Taguchi Design Method, ANN and PCA Approach under MQL Cutting Condition | Book | Advanced Materials Research | 2020 | Mr. Rezaul Karim Nayeem | |
| Effect of Fiber Loading and Orientation on Mechanical and Thermal Properties of Jute-Polyester Laminated Composite | Journal Article | Journal of Natural Fiber, Taylor & Francis | 2020 | Dr. Fazlar Rahman | Paper Link |
| Physico-mechanical properties investigation of sponge-gourd and betel nut reinforced hybrid polyester composites | Journal Article | Advances in Materials and Processing Technologies, Taylor & Francis | 2020 | Dr. Fazlar Rahman | Paper Link |
| Experimental Study of Physical, Mechanical and Thermal Properties of Rattan-Bamboo Fiber Reinforced Hybrid Polyester Laminated Composite | Journal Article | Journal of Natural Fiber, Taylor & Francis | 2020 | Dr. Fazlar Rahman | Paper Link |
| Optimization of sewing line production rate and cost using Taguchi signal-to-noise method | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Mr. Md. Jubayer Hossain | Paper Link |
| Sustainability Assessment, Investigations, and Modelling of Slot Milling Characteristics in Eco-Benign Machining of Hardened Steel | Journal Article | Metals | 2020 | Dr. Mozammel Mia | Paper Link |
| Mathematical modeling and intelligent optimization of submerged arc welding process parameters using hybrid PSO-GA evolutionary algorithms | Journal Article | Neural Computing and Applications | 2020 | Dr. Mozammel Mia | Paper Link |
| Influences of TiAlN coating and limiting angles of flutes on prediction of cutting forces and dynamic stability in micro milling of die steel (P-20) | Journal Article | Journal of Materials Processing Technology | 2020 | Dr. Mozammel Mia | Paper Link |
| Investigations on Surface Roughness and Tool Wear Characteristics in Micro-Turning of Ti-6Al-4V Alloy | Journal Article | Materials | 2020 | Dr. Mozammel Mia | Paper Link |
| Chapter 10 - High speed machining of magnesium and its alloys | Book | High Speed Machining | 2020 | Dr. Mozammel Mia | Paper Link |
| Six sigma optimization of multiple machining characteristics in hard turning under dry, flood, MQL and solid lubrication | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Dr. Mozammel Mia | Paper Link |
| Influence of CO2-snow and subzero MQL on thermal aspects in the machining of Ti-6Al-4V | Journal Article | Applied Thermal Engineering | 2020 | Dr. Mozammel Mia | Paper Link |
| Wear behaviour of TiAlN coated solid carbide end-mill under alumina enriched minimum quantity palm oil-based lubricating condition | Journal Article | Tribology International | 2020 | Dr. Mozammel Mia | Paper Link |
| Application of hybrid nature-inspired algorithm: Single and bi-objective constrained optimization of magnetic abrasive finishing process parameters | Journal Article | Journal of Materials Research and Technology | 2020 | Dr. Mozammel Mia | Paper Link |
| Comprehensive analysis on orthopedic drilling: A state-of-the-art review | Journal Article | Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine | 2020 | Dr. Mozammel Mia | Paper Link |
| Manufacturing of Al Alloy Microrods by Micro Cutting in a Micromachining Center | Journal Article | Micromachines | 2020 | Dr. Mozammel Mia | Paper Link |
| Comprehensive Study on Tool Wear During Machining of Fiber-Reinforced Polymeric Composites | Book | Composites Science and Technology | 2020 | Dr. Mozammel Mia | Paper Link |
| Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy | Journal Article | Journal of Cleaner Production | 2020 | Dr. Mozammel Mia | Paper Link |
| Influence of silicon carbide and porcelain on tribological performance of Al6061 based hybrid composites | Journal Article | Tribology International | 2020 | Dr. Mozammel Mia | Paper Link |
| Mechanical Strength Enhancement of 3D Printed Acrylonitrile Butadiene Styrene Polymer Components Using Neural Network Optimization Algorithm | Journal Article | Polymers | 2020 | Dr. Mozammel Mia | Paper Link |
| Evolution of tool flank wear and its influence on machining characteristics in pressurized-oil jet assisted hard turning | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Dr. Mozammel Mia | Paper Link |
| Effects of Turning Parameters and Parametric Optimization of the Cutting Forces in Machining SiCp/Al 45 wt% Composite | Journal Article | Metals | 2020 | Dr. Mozammel Mia | Paper Link |
| Internal Cylindrical Grinding Process of INCONEL® Alloy 600 Using Grinding Wheels with Sol–Gel Alumina and a Synthetic Organosilicon Polymer-Based Impregnate | Journal Article | Micromachines | 2020 | Dr. Mozammel Mia | Paper Link |
| Impact of layer rotation on micro-structure, grain size, surface integrity and mechanical behaviour of SLM Al-Si-10Mg alloy | Journal Article | Journal of Materials Research and Technology | 2020 | Dr. Mozammel Mia | Paper Link |
| Investigation of the specific cutting energy and its effect in shearing dominant precision micro cutting | Journal Article | Journal of Materials Processing Technology | 2020 | Dr. Mozammel Mia | Paper Link |
| Synergistic effect of silica and pure palm oil on the machining performances of Inconel 690: A study for promoting minimum quantity nano doped-green lubricants | Journal Article | Journal of Cleaner Production | 2020 | Dr. Mozammel Mia | Paper Link |
| Modeling and performance evaluation of Al2O3, MoS2 and graphite nanoparticle-assisted MQL in turning titanium alloy: an intelligent approach | Journal Article | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2020 | Dr. Mozammel Mia | Paper Link |
| Multi-Response Optimization of Electrical Discharge Drilling Process of SS304 for Energy Efficiency, Product Quality, and Productivity | Journal Article | Materials | 2020 | Dr. Mozammel Mia | Paper Link |
| Progress for sustainability in the mist assisted cooling techniques: a critical review | Journal Article | The International Journal of Advanced Manufacturing Technology | 2020 | Dr. Mozammel Mia | Paper Link |
| Cryogenic turning of in-house cast magnesium based MMCs: A comprehensive investigation | Journal Article | Journal of Materials Research and Technology | 2020 | Dr. Mozammel Mia | Paper Link |
| Sustainability-based performance evaluation of hybrid nanofluid assisted machining | Journal Article | Journal of Cleaner Production | 2020 | Dr. Mozammel Mia | Paper Link |
| Machinability investigations of hardened steel with biodegradable oil-based MQL spray system | Journal Article | The International Journal of Advanced Manufacturing Technology | 2020 | Dr. Mozammel Mia | Paper Link |
| Milling of Ti–6Al–4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining | Journal Article | The International Journal of Advanced Manufacturing Technology | 2020 | Dr. Mozammel Mia | Paper Link |
| State-Of-The-Art and Trends in CO2 Laser Cutting of Polymeric Materials—A Review | Journal Article | Materials | 2020 | Dr. Mozammel Mia | Paper Link |
| Artificial Intelligence-Based Hole Quality Prediction in Micro-Drilling Using Multiple Sensors | Journal Article | Sensors | 2020 | Dr. Mozammel Mia | Paper Link |
| Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4 V alloy | Journal Article | Sustainable Materials and Technologies | 2020 | Dr. Mozammel Mia | Paper Link |
| Wear behavior of textured tools under graphene-assisted minimum quantity lubrication system in machining Ti-6Al-4V alloy | Journal Article | Tribology International | 2020 | Dr. Mozammel Mia | Paper Link |
| Green machining for the dry milling process of stainless steel 304 | Journal Article | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | 2020 | Dr. Mozammel Mia | Paper Link |
| High-Accuracy 3D Optical Profilometry for Analysis of Surface Condition of Modern Circulated Coins | Journal Article | Materials | 2020 | Dr. Mozammel Mia | Paper Link |
| Energy-Based Novel Quantifiable Sustainability Value Assessment Method for Machining Processes | Journal Article | Energies | 2020 | Dr. Mozammel Mia | Paper Link |
| Assessment of CVD- and PVD-Coated Carbides and PVD-Coated Cermet Inserts in the Optimization of Surface Roughness in Turning of AISI 1045 Steel | Journal Article | Materials | 2020 | Dr. Mozammel Mia | Paper Link |
| Influence of Variable Radius of Cutting Head Trajectory on Quality of Cutting Kerf in the Abrasive Water Jet Process for Soda–Lime Glass | Journal Article | Materials | 2020 | Dr. Mozammel Mia | Paper Link |
| Evaluating the sustainability pillars of energy and environment considering carbon emissions under machining ofTi-3Al-2.5 V | Journal Article | Sustainable Energy Technologies and Assessments | 2020 | Dr. Mozammel Mia | Paper Link |
| Sustainability-Based Optimization of the Rotary Turning of the Hardened Steel | Journal Article | Metals | 2020 | Dr. Mozammel Mia | Paper Link |
| Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel | Journal Article | Journal of Cleaner Production | 2020 | Dr. Mozammel Mia | Paper Link |
| Modeling, multi-objective optimization and cost estimation of bone drilling under micro-cooling spray technique: an integrated analysis | Journal Article | International Journal on Interactive Design and Manufacturing (IJIDeM) | 2020 | Dr. Mozammel Mia | Paper Link |
| Taguchi S/N and TOPSIS Based Optimization of Fused Deposition Modelling and Vapor Finishing Process for Manufacturing of ABS Plastic Parts | Journal Article | Materials | 2020 | Dr. Mozammel Mia | Paper Link |
| Modeling and Evaluation of Energy Efficiency of New Hybrid Turning-Burnishing Process in Terms of Surface Properties | Journal Article | Energies | 2020 | Dr. Mozammel Mia | Paper Link |
| Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants | Journal Article | Tribology International | 2020 | Dr. Mozammel Mia | Paper Link |
| Improving supply chain sustainability in the context of COVID-19 pandemic in an emerging economy: Exploring drivers using an integrated model | Journal Article | Sustainable Production and Consumption | 2020 | Mr. Sayem Ahmed | Paper Link |
| Critical success factors for implementing green supply chain management in the electronics industry: an emerging economy case | Journal Article | International Journal of Logistics Research and Applications | 2020 | Mr. Sayem Ahmed | Paper Link |
| Comparative Analysis of Fuzzy-AHP and TOPSIS Approach for Supplier Evaluation in a Cement Manufacturing Company | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Sayem Ahmed | Paper Link |
| Comparison of Fuzzy-AHP and AHP Approach for Supplier Evaluation and Selection in a Cement Manufacturing Company | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Sayem Ahmed | Paper Link |
| Investigation for the drag reduction by introducing a passage through a circular cylinder | Journal Article | Annals of Engineering | 2020 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Effect of Fuel Orientation on the Performance of Air Curtains in Confining Fire and Smoke Propagation in Informal Shopping Malls | Conference Proceedings | International Exchange and Innovation Conference on Engineering & Sciences (IEICES) | 2020 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Strategies to Manage the Impacts of the COVID-19 Pandemic in the Supply Chain: Implications for Improving Economic and Social Sustainability | Journal Article | Sustainability | 2020 | Ms. Humaira Nafisa Ahmed | Paper Link |
| Comparison of Fuzzy-AHP and AHP Approach for Supplier Evaluation Selection in a Cement Manufacturing Company | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Md. Sazzad Hossain Ador | |
| Multi-Objective Mixed Model Assembly Line Balancing Using Mixed Integer Linear Programming | Journal Article | American Journal of Industrial Engineering | 2020 | Mr. Md. Sazzad Hossain Ador | |
| Comparative Analysis of Fuzzy-AHP and TOPSIS Approach for Supplier Evaluation in a Cement Manufacturing Company | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Md. Sazzad Hossain Ador | |
| Partner Selection for Multi-Echelon Supply Chain Using Artificial Bee Colony Algorithm | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2020 | Mr. Md. Sazzad Hossain Ador | |
| A Comparative Analysis of Inventory Cost Equation Considering Shortage and Backlogging Cost | Journal Article | Recent Trends in Production Engineering | 2020 | Mr. Zahid Hasan Shuvo | |
| Impact of nozzle design on grinding temperature of hardened steel under MQL condition | Conference Proceedings | Materials Today: Proceedings | 2020 | Ms. Mahjabin Moon | |
| Damage micromechanisms in high Mn and Zn content 7XXX aluminum alloys | Journal Article | Materials Science and Engineering: A | 2020 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Tensile Strength Study of Stainless-Steel using Weibull Distribution | Journal Article | MIST International Journal of Science and Technology | 2020 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Modeling drivers to big data analytics in supply chains | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Mr. Kazi Wahadul Hasan | Paper Link |
| Contextual relationships among key factors related to environmental sustainability: evidence from an emerging economy | Journal Article | Sustainable Production and Consumption | 2020 | Mr. Kazi Wahadul Hasan | Paper Link |
| Miniaturization by precision micro cutting | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Dr. Muhommad Azizur Rahman | Paper Link |
| Machinability investigations of hardened steel with biodegradable oil-based MQL spray system | Journal Article | The International Journal of Advanced Manufacturing Technology | 2020 | Dr. Muhommad Azizur Rahman | Paper Link |
| An Intelligent Approach of Vehicle Routing of Super Shop Shwapno | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering (ICMIE) 2020 | 2020 | Dr. Muhommad Azizur Rahman | |
| Electro-discharge grinding of additive manufactured metallic components | Conference Proceedings | 5th CIRP Conference on Surface Integrity (CSI 2020) | 2020 | Dr. Muhommad Azizur Rahman | |
| Wire electrical discharge polishing of additive manufactured metallic components | Journal Article | Procedia CIRP | 2020 | Dr. Muhommad Azizur Rahman | Paper Link |
| Minimizing Stringing Issues in FDM Printing | Conference Proceedings | 3rd International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM) | 2020 | Dr. Muhommad Azizur Rahman | |
| A cyber-physical system (CPS) for automating additive manufacturing process with industry 4.0 | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering (ICMIE) 2020 | 2020 | Dr. Muhommad Azizur Rahman | |
| Comparative analysis of additive and subtractive manufacturing processes through fabrication of a spur gear | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering (ICMIE) 2020 | 2020 | Dr. Muhommad Azizur Rahman | |
| Optimization of sewing line production rate and cost using Taguchi signal-to-noise method | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Dr. Muhommad Azizur Rahman | Paper Link |
| Modeling and performance evaluation of Al2O3, MoS2 and graphite nanoparticle‑assisted MQL in turning titanium alloy: an intelligent approach | Journal Article | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2020 | Dr. Muhommad Azizur Rahman | Paper Link |
| Six sigma optimization of multiple machining characteristics in hard turning under dry, flood, MQL and solid lubrication | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Dr. Muhommad Azizur Rahman | Paper Link |
| Investigation of the specific cutting energy and its effect in shearing dominant precision micro cutting | Journal Article | Journal of Materials Processing Technology | 2020 | Dr. Muhommad Azizur Rahman | Paper Link |
| Tensile Strength Study of Stainless-Steel using Weibull Distribution | Journal Article | MIST International Journal of Science and Tenchnology | 2020 | Dr. Muhommad Azizur Rahman | Paper Link |
| Influence of cutting parameters causing variation of surface roughness and chip characteristics of Mg AZ31B Alloy | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Dr. Muhommad Azizur Rahman | Paper Link |
| Finite Element Simulation of Flow Stress and Its Implications for Machining Process Optimization | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering (ICMIE) 2020 | 2020 | Dr. Muhommad Azizur Rahman | |
| Rapid pre-concentration of Escherichia coli in a microfluidic paper-based device using ion concentration polarization | Journal Article | Electrophoresis | 2020 | Mr. Syed Shaheer Uddin Ahmed | |
| An Electroporation Device with Microbead-Enhanced Electric Field for Bacterial Inactivation | Journal Article | Inventions | 2020 | Mr. Syed Shaheer Uddin Ahmed | |
| Physico-mechanical properties investigation of sponge-gourd and betel nut reinforced hybrid polyester composites | Journal Article | Advances in Materials and Processing Technologies | 2020 | Mr. Shadman Sharar Alam | Paper Link |
| An Experimental Study of Physical, Mechanical, and Thermal Properties of Rattan-Bamboo Fiber Reinforced Hybrid Polyester Laminated Composite | Journal Article | Journal of Natural Fibers | 2020 | Mr. Shadman Sharar Alam | Paper Link |
| Performance Comparison of Nanofluids In Laminar Convective Flow Region Through a Channel | Conference Proceedings | International Conference on Advances in Materials and Manufacturing Engineering (ICAMME 2019) | 2020 | Mr. Sazedur Rahman | Paper Link |
| Strategies to Manage the Impacts of the COVID-19 Pandemic in the Supply Chain: Implications for Improving Economic and Social Sustainability | Journal Article | Sustainability | 2020 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Critical success factors for implementing green supply chain management in the electronics industry: an emerging economy case | Journal Article | International Journal of Logistics Research and Applications | 2020 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Effect of Heat Resistant Coating on the Drilled Hole Quality of Hybrid Fiber Reinforced Epoxy Composite, Strain (2020): 530- 537. | Journal Article | 2020 | Mr. A K M Sarower Kabir | ||
| Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment | Journal Article | International Journal of Advanced Manufacturing Technology | 2020 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Optimum Utilisation of CuO Nanofluid in Flat Plate Solar Collector | Journal Article | International Journal of Automotive and Mechanical Engineering | 2020 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Encyclopedia of Renewable and Sustainable Materials (vol. 1 - 5) | Book | Encyclopedia of Renewable and Sustainable Materials 2020 | 2020 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Energy storage technologies | Book | In Book: Energy for Sustainable Development: Demand, Supply, Conversion and Management | 2020 | Dr. Md Zillur Rahman | Paper Link |
| An Efficient Ant Colony Algorithm for Multi-Depot Heterogeneous Fleet Green Vehicle Routing Problem | Conference Proceedings | 5th NA International Conference on Industrial Engineering and Operations Management Detroit, Michigan, USA, August 10 - 14, 2020 | 2020 | Ms. Prattusha Bhattacharjee | Paper Link |
| Enhancement of Supply Chain Performance by Data Analytics | Conference Proceedings | International Conference on Industrial Engineering and Operations Management Harare, Zimbabwe, October 20-22, 2020 | 2020 | Mr. A.I.M Johurul Islam | |
| Influence of ergonomics and its impact on sewing machine operators’ musculoskeletal disorders in lean environment in the RMG industry of Bangladesh. | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Prof. Dr. Mohammad Sarwar Morshed | |
| Occupational Health and Safety and Productivity Improvement in RMG Industries – A Lesson Learned for Sustainable Development (OHS) | Conference Proceedings | IMEOM 2019 | 2019 | Prof. Dr. Mohammad Sarwar Morshed | |
| Single Minute Exchange of Dies (SMED) practice in ready made garments factories in Bangladesh- Issues and challenges | Conference Proceedings | ICERE 2019 | 2019 | Prof. Dr. Mohammad Sarwar Morshed | |
| Facilitating the creation of synergies between OHS and Productivity - The implementation of lean tools | Conference Proceedings | The 6th International EurOMA | 2019 | Prof. Dr. Mohammad Sarwar Morshed | |
| A comprehensive study to evaluate absolute uptake of carbon dioxide adsorption onto composite adsorbent | Journal Article | International Journal of Refrigeration | 2019 | Dr. Mahbubul Muttakin | Paper Link |
| A Statistical Approach Employing Bootstrap Sample to Determine Optimum Models for IUPAC Type-I and Type-V Isotherms | Conference Proceedings | Proceedings of the 5th International Conference on Polygeneration (ICP) | 2019 | Dr. Mahbubul Muttakin | |
| Experimental study on the effect of adsorbent height on adsorption dynamics | Conference Proceedings | International Meeting on Advances in Thermofluids (IMAT) | 2019 | Dr. Mahbubul Muttakin | Paper Link |
| Solar Thermal-Powered Adsorption Chiller | Book | Tyagi H., Chakraborty P., Powar S., Agarwal A. (eds) Solar Energy. Energy, Environment, and Sustainability | 2019 | Dr. Mahbubul Muttakin | Paper Link |
| A Statistical Approach to Determine Optimal Models for IUPAC-Classified Adsorption Isotherms | Journal Article | Energies | 2019 | Dr. Mahbubul Muttakin | Paper Link |
| Study of an adsorption chiller that incorporates mass and heat recovery schemes | Conference Proceedings | International Conference on Polygeneration (ICP) | 2019 | Dr. Mahbubul Muttakin | |
| A Comprehensive Study of Fuzzy TOPSIS Methodology for Ranking of Critical Factors in Evaluating Employee Performance | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Inzamam Ul Haq | |
| Qualitative model for identifying leadership using fuzzy logic | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Shah Md. Ashiquzzaman Nipu | |
| The Development of a Measure of Risk Using Fuzzy Logic | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Shah Md. Ashiquzzaman Nipu | |
| Harvesting of electrical energy from wasted heat from common household stoves using thermoelectric generators (TEGs) | Conference Proceedings | 8TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING | 2019 | Dr. Md. Kharshiduzzaman | Paper Link |
| Determination of the thermal conductivity of poor conductive materials in the form of disc by self-constructed Lee’s disc apparatus | Conference Proceedings | 8TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING | 2019 | Dr. Md. Kharshiduzzaman | Paper Link |
| Experimental analysis of the response of fiber Bragg grating sensors under non-uniform strain field in a twill woven composite | Journal Article | Journal of Composite Materials | 2019 | Dr. Md. Kharshiduzzaman | Paper Link |
| Waste heat of a brick kiln – an opportunity of power generation | Journal Article | Journal of Alternative and Renewable Energy Sources | 2019 | Dr. Dewan Hasan Ahmed | |
| A Conceptual Design of Energy Harvest from Roadside Trees of a Highway | Journal Article | European Journal of Sustainable Development Research | 2019 | Dr. Dewan Hasan Ahmed | |
| Influence of single and dual cryogenic jets on machinability characteristics in turning of Ti-6Al-4V | Journal Article | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | 2019 | Dr. Mozammel Mia | Paper Link |
| Multi-objective optimization of surface roughness, thrust force, and torque produced by novel drill geometries using Taguchi-based GRA | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Analysis of the Deviation in a Low-Cost System for Stepless Digital Control of Conventional Lathe Spindle Speeds | Journal Article | Applied Sciences | 2019 | Dr. Mozammel Mia | Paper Link |
| Multi-objective optimization and life cycle assessment of eco-friendly cryogenic N2 assisted turning of Ti-6Al-4V | Journal Article | Journal of Cleaner Production | 2019 | Dr. Mozammel Mia | Paper Link |
| Optimization of hole quality produced by novel drill geometries using the Taguchi S/N approach | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Multi-objective parametric appraisal of pulsed current gas tungsten arc welding process by using hybrid optimization algorithms | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Influence of Different Grades of CBN Inserts on Cutting Force and Surface Roughness of AISI H13 Die Tool Steel during Hard Turning Operation | Journal Article | Materials | 2019 | Dr. Mozammel Mia | Paper Link |
| Effects of hybrid Al2O3-CNT nanofluids and cryogenic cooling on machining of Ti–6Al–4V | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Parametric optimization and process capability analysis for machining of nickel-based superalloy | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Tribo-corrosion characterization of NiTiCu alloy for bio-implant applications | Journal Article | Materials Research Express | 2019 | Dr. Mozammel Mia | Paper Link |
| Effect of the Relative Position of the Face Milling Tool towards the Workpiece on Machined Surface Roughness and Milling Dynamics | Journal Article | Applied Sciences | 2019 | Dr. Mozammel Mia | Paper Link |
| Multi-Response Optimization of Face Milling Performance Considering Tool Path Strategies in Machining of Al-2024 | Journal Article | Materials | 2019 | Dr. Mozammel Mia | Paper Link |
| Evaluation of Copper-Based Alloy (C93200) Composites Reinforced with Marble Dust Developed by Stir Casting under Vacuum Environment | Journal Article | Materials | 2019 | Dr. Mozammel Mia | Paper Link |
| Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Optimization of Power Consumption Associated with Surface Roughness in Ultrasonic Assisted Turning of Nimonic-90 Using Hybrid Particle Swarm-Simplex Method | Journal Article | Materials | 2019 | Dr. Mozammel Mia | Paper Link |
| Intelligent Optimization of Hard-Turning Parameters Using Evolutionary Algorithms for Smart Manufacturing | Journal Article | Materials | 2019 | Dr. Mozammel Mia | Paper Link |
| Obtaining Various Shapes of Machined Surface Using a Tool with a Multi-Insert Cutting Edge | Journal Article | Applied Sciences | 2019 | Dr. Mozammel Mia | Paper Link |
| Maximization of Sewing Line Production Using Taguchi Signal-to-Noise Method | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Dr. Mozammel Mia | |
| Experimental Studies on MoS2-Treated Grinding Wheel Active Surface Condition after High-Efficiency Internal Cylindrical Grinding Process of INCONEL® Alloy 718 | Journal Article | Micromachines | 2019 | Dr. Mozammel Mia | Paper Link |
| Influence of Al 2 O 3 and palm oil–mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules–based FIS model in eco-benign milling | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Investigations of surface integrity, bio-activity and performance characteristics during wire-electrical discharge machining of Ti-6Al-7Nb biomedical alloy | Journal Article | Materials Research Express | 2019 | Dr. Mozammel Mia | Paper Link |
| Mathematical modeling and intelligent optimization of submerged arc welding process parameters using hybrid PSO-GA evolutionary algorithms | Journal Article | Neural Computing and Applications | 2019 | Dr. Mozammel Mia | Paper Link |
| Multi-objective optimization for MQL-assisted end milling operation: an intelligent hybrid strategy combining GEP and NTOPSIS | Journal Article | Neural Computing and Applications | 2019 | Dr. Mozammel Mia | Paper Link |
| Sustainability assessment associated with surface roughness and power consumption characteristics in nanofluid MQL-assisted turning of AISI 1045 steel | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Carbide tool life prediction and modeling in SiCp/Al turning process via artificial neural network approach | Conference Proceedings | IOP Conference Series: Materials Science and Engineering | 2019 | Dr. Mozammel Mia | Paper Link |
| Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Ecological trends in machining as a key factor in sustainable production–a review | Journal Article | Journal of Cleaner Production | 2019 | Dr. Mozammel Mia | Paper Link |
| Machinability improvement in Inconel-718 by enhanced tribological and thermal environment using textured tool | Journal Article | Journal of Thermal Analysis and Calorimetry | 2019 | Dr. Mozammel Mia | Paper Link |
| Multi-Objective Optimization of Energy Consumption and Surface Quality in Nanofluid SQCL Assisted Face Milling | Journal Article | Energies | 2019 | Dr. Mozammel Mia | Paper Link |
| Internal Cracks and Non-Metallic Inclusions as Root Causes of Casting Failure in Sugar Mill Roller Shafts | Journal Article | Materials | 2019 | Dr. Mozammel Mia | Paper Link |
| GEP- and ANN-based tool wear monitoring: a virtually sensing predictive platform for MQL-assisted milling of Inconel 690 | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| GEP- and ANN-based tool wear monitoring: a virtually sensing predictive platform for MQL-assisted milling of Inconel 690 | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy | Journal Article | Materials | 2019 | Dr. Mozammel Mia | Paper Link |
| Evaluation of machinability and economic performance in cryogenic-assisted hard turning of α-β titanium: a step towards sustainable manufacturing | Journal Article | Machining Science and Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing | Journal Article | International Journal of Precision Engineering and Manufacturing-Green Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Investigations of Machining Characteristics in the Upgraded MQL-Assisted Turning of Pure Titanium Alloys Using Evolutionary Algorithms | Journal Article | Materials | 2019 | Dr. Mozammel Mia | Paper Link |
| Selection of an ideal MQL-assisted milling condition: an NSGA-II-coupled TOPSIS approach for improving machinability of Inconel 690 | Journal Article | International Journal of Advanced Manufacturing Technology | 2019 | Dr. Mozammel Mia | Paper Link |
| Evaluating the effect of micro-lubrication in orthopedic drilling | Journal Article | Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine | 2019 | Dr. Mozammel Mia | Paper Link |
| Improvement of tribological behavior of H-13 steel by optimizing the cryogenic-treatment process using evolutionary algorithms | Journal Article | Tribology International | 2019 | Dr. Mozammel Mia | Paper Link |
| TiO2 and zeolite nanopowder enhanced mechanical properties of hybrid polymer composites | Journal Article | Journal of Thermoplastic Composite Materials | 2019 | Mr. Md. Merajul Haque | Paper Link |
| Numerical study of wetting stability and sliding behavior of liquid droplets on microgrooved surfaces. | Journal Article | Colloid and Polymer Science | 2019 | Dr. Anjan Goswami | Paper Link |
| A comprehensive study of Fuzzy TOPSIS methodology for ranking of critical factors in evaluating employee performance | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Sayem Ahmed | Paper Link |
| A Comparative Analysis of Genetic Algorithm and LINGO for an Inbound Transportation Model | Journal Article | American Journal of Industrial Engineering | 2019 | Mr. Sayem Ahmed | Paper Link |
| Qualitative Model for Identifying Leadership Using Fuzzy Logic | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2019 | Mr. Sayem Ahmed | Paper Link |
| An Integrated Support Vector Classification Approach for Performance Evaluation and Selection of Multi-Attribute Suppliers Using Canonical Correlation Analysis (CCA) and Principal Component Analysis (PCA) | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Mr. Sayem Ahmed | |
| Risk Analysis of Ready-Made Garment Sector in Bangladesh | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Mr. Sayem Ahmed | |
| Effectiveness of Air Curtains as Thermal and Smoke Barrier Against High Gradients of Flow Parameters | Conference Proceedings | 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM’19) | 2019 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Spread and Propagation of Generic Shopping Mall Fire of Bangladesh Under Different Scenarios | Conference Proceedings | International Conference on Disaster Risk Management | 2019 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| A Comparative Analysis of Genetic Algorithm and LINGO for an Inbound Transportation Model | Journal Article | American Journal of Industrial Engineering | 2019 | Ms. Humaira Nafisa Ahmed | |
| Replacement of present conventional condenser of household refrigerator by louver fin micro channel condenser | Journal Article | Arabian Journal for Science and Engineering | 2019 | Dr. Mohammad Harun-Or-Rashid | Paper Link |
| Seesaw Dynamics and Control- Experimental Study, journal of Mechanical Robotics | Journal Article | Journal of Mechanical Robotics | 2019 | Dr. Mohammad Harun-Or-Rashid | |
| Fabrication and Study of an Unmanned Under Water Vehicle | Journal Article | IOSR Journal of Mechanical and Civil Engineering | 2019 | Dr. Mohammad Harun-Or-Rashid | |
| Study the Leg Mechanism of a Four Legged Field Robot | Journal Article | Journal of Mechanical Robotics | 2019 | Dr. Mohammad Harun-Or-Rashid | Paper Link |
| CFD ANALYSIS AROUND AHMED BODY USING A LAMINAR KINETIC ENERGY BASED TRANSITION AND TURBULENCE MODEL | Conference Proceedings | Topical Problems of Fluid Mechanics 2019 | 2019 | Prof. Dr. Mazharul Islam | Paper Link |
| Waste heat of a brick kiln – an opportunity of power generation | Journal Article | Journal of Alternative and Renewable Energy Sources | 2019 | Mr. Sadman Hassan Labib | Paper Link |
| Comparison of linear displacement measurement between a MEMS accelerometer and HC-SR04 low cost ultrasonic sensor | Conference Proceedings | 1st International Conference on Advances in Science, Engineering and Robotics Technology | 2019 | Mr. Mohsan Uddin Ahmad | |
| A CFD investigation of conventional brick kilns | Conference Proceedings | 8th BSME International Conference on Thermal Engineering | 2019 | Mr. Mohsan Uddin Ahmad | Paper Link |
| A Multi-Item Inventory Control Model using Multi Objective Particle Swarm Optimization (MOPSO) | Conference Proceedings | International Conference on Industrial Engineering and Operations Management (IEOM) | 2019 | Ms. Mahjabin Rahman | |
| Raw Material Inventory Control Model for RMG with Shortage Prediction using Nature Inspired Algorithm | Conference Proceedings | International Scientific Conference on Sustainability of Global Garment Industry | 2019 | Ms. Mahjabin Rahman | |
| Influence of Al2O3 and palm oil–mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules–based FIS model in eco-benign milling | Journal Article | The International Journal of Advanced Manufacturing Technology | 2019 | Dr. Muhommad Azizur Rahman | Paper Link |
| Maximization of Sewing Line Production Using taguchi Signal-to-Noise Method | Conference Proceedings | International Scientific Conference On Sustainability of Global Garment Industry | 2019 | Dr. Muhommad Azizur Rahman | |
| . A comparison between Agency System and Regular Employment of RMG workers in Bangladesh | Conference Proceedings | International Scientific Conference On Sustainability of Global Garment Industry | 2019 | Dr. Muhommad Azizur Rahman | |
| Comparison of Machining results for different materials | Conference Proceedings | International Conference on Mechanical, Industrial and Materials Engineering (ICMIME 2019) | 2019 | Dr. Muhommad Azizur Rahman | |
| Manufacturing of Al Alloy Microrods by Micro Cutting in a Micromachining Center | Journal Article | Micromachines | 2019 | Dr. Muhommad Azizur Rahman | Paper Link |
| Tool Condition Monitoring using Acoustic Emission (AE) Signals in Machining of Hardened Steel with Ceramic Tool | Conference Proceedings | International Conference on Mechanical, Industrial and Materials Engineering (ICMIME) | 2019 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| Implementation of Response Surface Methodology and Genetic Algorithm in optimization of parameters in machining hardened steel (HRC 65) using ceramic tool. | Journal Article | Journal of Mechanical Engineering | 2019 | Mr. Md. Tanvir Ahmed Pranto | Paper Link |
| Assessing the effects of lean on occupational health and safety in the Ready-Made Garment industry | Journal Article | Work | 2019 | Dr. Abu Hamja | Paper Link |
| Removing bottlenecks in the sewing line – possible consequences for workers’ health, in: International Scientific Conference on Sustainability of Global Garment Industry | Conference Proceedings | International Scientific Conference: Sustainability of Global Garment Industry | 2019 | Dr. Abu Hamja | |
| The effect of lean on occupational health and safety and productivity in the garment industry–a literature review | Journal Article | Production & Manufacturing Research | 2019 | Dr. Abu Hamja | Paper Link |
| Single Minute Exchange of Dies (SMED) practice in readymade garments factories in Bangladesh- Issues and challenges | Conference Proceedings | International Conference on Engineering Research and Education School of Applied sciences & Technology | 2019 | Dr. Abu Hamja | |
| Assessment of Productivity and Ergonomic Conditions at the Production Floor: An Investigation into the Bangladesh Readymade Garments Industry | Book | International Ergonomics Association 20th congress | 2019 | Dr. Abu Hamja | Paper Link |
| Transfer mechanisms of lean implementation in the apparel industry in Bangladesh | Conference Proceedings | International Student Congress- New Technologies in Engineering | 2019 | Dr. Abu Hamja | |
| Fabrication and electrical properties of regenerated cellulose-loaded exfoliated graphene nanoplatelet composites | Journal Article | Carbon Letters | 2019 | Mr. Dr. Abdullahil Kafy | |
| The Effect of Elevated Temperature on the Drawability of a Circular Deep Drawn Metal Cup | Journal Article | Metals | 2019 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Current development on using Rotary Inverted Pendulum as a benchmark for testing linear and nonlinear control algorithms . | Journal Article | Mechanical Systems and Signal Processing | 2019 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| A Numerical Model to Simulate the Impact Response of Flax-PP Composites | Conference Proceedings | Proceedings of the 22nd International Conference on Composite Materials | 2019 | Dr. Md Zillur Rahman | |
| Life cycle assessment of a reciprocating engine power plant in Bangladesh | Conference Proceedings | AIP Conference Proceedings 2121, 110001 (2019) | 2019 | Prof. Dr. Md Nurul Absar Chowdhury | Paper Link |
| Experimental analysis of heat transfer with CuO, Al2O3/water-ethylene glycol nanofluids in automobile radiator | Conference Proceedings | AIP Conference Proceedings · July 2019 | 2019 | Prof. Dr. Md Nurul Absar Chowdhury | |
| LCA Model for Water Footprint for Reciprocating Engine (Re) Power Plant | Conference Proceedings | Proceedings of the 2nd International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), Dhaka, Bangladesh. December 12-13, 2019 | 2019 | Prof. Dr. Md Nurul Absar Chowdhury | Paper Link |
| Synergies of OHS and Productivity Improvement in RMG Industries – An outcome of intervention process | Others | IEOM 2018 | 2018 | Prof. Dr. Mohammad Sarwar Morshed | |
| Study on the influence of adsorbent particle size and heat exchanger aspect ratio on dynamic adsorption characteristics | Journal Article | Applied Thermal Engineering | 2018 | Dr. Mahbubul Muttakin | Paper Link |
| Experimental study of CO\_2 adsorption kinetics onto activated carbon | Conference Proceedings | International Exchange and Innovation Conference on Engineering & Sciences (IEICES 2018) | 2018 | Dr. Mahbubul Muttakin | Paper Link |
| Theoretical framework to evaluate minimum desorption temperature for IUPAC classified adsorption isotherms | Journal Article | International Journal of Heat and Mass Transfer | 2018 | Dr. Mahbubul Muttakin | Paper Link |
| Effect of thermal ageing on mechanical behavior of synthetic and natural rubber dominated short flat bars | Conference Proceedings | International Conference on Mechanical Engineering | 2018 | Mr. Md. Faysal Khan | Paper Link |
| Optimization of Machining Parameter for Surface Roughness in Turning GFRP Composite Using RSM-GA Approach | Journal Article | American Journal of Materials Science and Engineering, | 2018 | Mr. Rezaul Karim Nayeem | |
| Predictive Modeling of Surface Roughness in MQL assisted Turning of SiC-Al Alloy Composites using Artificial Neural Network and Adaptive Neuro Fuzzy Inference System | Journal Article | Journal of Advanced Research in Manufacturing, Material Science and Metallurgical Engineering | 2018 | Mr. Rezaul Karim Nayeem | |
| Experimental Investigation of the effect of Cutting Parameters on Cutting Temperature using RSM and ANN in Turning AISI 1040 | Journal Article | Global Scientific Journal | 2018 | Mr. Rezaul Karim Nayeem | |
| Prediction and optimization of surface roughness in minimum quantity coolant lubrication applied turning of high hardness steel | Journal Article | Measurement | 2018 | Dr. Md. Kharshiduzzaman | Paper Link |
| Stress, Deformation and Failure Analysis of Parabolic Leaf Spring by Finite Element Analysis with Material Optimization | Conference Proceedings | 4th International Conference On "Structure, Processing and Properties of Materials" SPPM 2018,BUET | 2018 | Dr. Fazlar Rahman | Paper Link |
| Numerical Analysis Of Boiler Fabricated From Ship Breaking Yard Steel Plate And Minimizing Workplace Casualties In Bangladesh | Journal Article | American Journal of Mechanical Engineering | 2018 | Dr. Fazlar Rahman | Paper Link |
| Effect of Heat Transfer Through Wall On Response Of Pneumatic System | Journal Article | Arabian Journal of Science and Engineering | 2018 | Dr. Fazlar Rahman | Paper Link |
| Experimental Study of Concentric Staggered Annular Fin with Radial Outlet and Staggered Rectangular Fin with Lateral Outlet | Journal Article | Journal of Mechanical and Mechanics Engineering (MATT Journal) | 2018 | Dr. Fazlar Rahman | |
| Numerical Study of Wing with Winglets for Different Cant Angle | Journal Article | Journal of Mechanical and Mechanics Engineering | 2018 | Dr. Dewan Hasan Ahmed | |
| Effect of cavity shape and heat source/sink orientation on PCM melting | Journal Article | J. Therm. Energy Syst | 2018 | Dr. Dewan Hasan Ahmed | |
| Stress, Deformation and Failure Analysis of Parabolic Leaf Spring by Finite Element Analysis with Material Optimization | Journal Article | IOP Conference Series: Materials Science and Engineering | 2018 | Mr. Md. Jubayer Hossain | Paper Link |
| Drive cycle of heavy vehicles in Dhaka city: A case study | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 2018 | Mr. Md. Jubayer Hossain | |
| Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning | Journal Article | Measurement | 2018 | Mr. Md. Jubayer Hossain | Paper Link |
| Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy | Journal Article | Journal of Materials Processing Technology | 2018 | Dr. Mozammel Mia | Paper Link |
| Hybrid cooling-lubrication strategies to improve surface topography and tool wear in sustainable turning of Al 7075-T6 alloy | Journal Article | International Journal of Advanced Manufacturing Technology | 2018 | Dr. Mozammel Mia | Paper Link |
| Machinability Investigations of Inconel-800 Super Alloy under Sustainable Cooling Conditions | Journal Article | Materials | 2018 | Dr. Mozammel Mia | Paper Link |
| Modeling flatness deviation in face milling considering angular movement of the machine tool system components and tool flank wear | Journal Article | Precision Engineering | 2018 | Dr. Mozammel Mia | Paper Link |
| Synthesis, Characterization, Corrosion Resistance and In-Vitro Bioactivity Behavior of Biodegradable Mg–Zn–Mn–(Si–HA) Composite for Orthopaedic Applications | Journal Article | Materials | 2018 | Dr. Mozammel Mia | Paper Link |
| Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning | Journal Article | Measurement | 2018 | Dr. Mozammel Mia | Paper Link |
| Prediction and optimization of surface roughness in minimum quantity coolant lubrication applied turning of high hardness steel | Journal Article | Measurement | 2018 | Dr. Mozammel Mia | Paper Link |
| Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition | Journal Article | Measurement | 2018 | Dr. Mozammel Mia | Paper Link |
| Modeling and optimization of tool wear in MQL-assisted milling of Inconel 718 superalloy using evolutionary techniques | Journal Article | The International Journal of Advanced Manufacturing Technology | 2018 | Dr. Mozammel Mia | Paper Link |
| Mathematical modeling and optimization of MQL assisted end milling characteristics based on RSM and Taguchi method | Journal Article | Measurement | 2018 | Dr. Mozammel Mia | Paper Link |
| Influence of Ranque-Hilsch vortex tube and nitrogen gas assisted MQL in precision turning of Al 6061-T6 | Journal Article | Precision Engineering | 2018 | Dr. Mozammel Mia | Paper Link |
| An approach to cleaner production for machining hardened steel using different cooling-lubrication conditions | Journal Article | Journal of Cleaner Production | 2018 | Dr. Mozammel Mia | Paper Link |
| Modeling of Surface Roughness Using RSM, FL and SA in Dry Hard Turning | Journal Article | Arabian Journal for Science and Engineering | 2018 | Dr. Mozammel Mia | Paper Link |
| Multi-Objective Optimization for Grinding of AISI D2 Steel with Al2O3 Wheel under MQL | Journal Article | Materials | 2018 | Dr. Mozammel Mia | Paper Link |
| Influence of fiber surface treatment on physicomechanical properties of betel nut and glass fiber reinforced hybrid polyethylene composites | Journal Article | Advances in Materials and Processing Technologies | 2018 | Mr. Md. Merajul Haque | Paper Link |
| Stress, Deformation and Failure Analysis of Parabolic Leaf Spring by Finite Element Analysis with Material Optimization | Journal Article | IOP Conference Series: Materials Science and Engineering | 2018 | Mr. Md. Merajul Haque | Paper Link |
| Drive cycle of heavy vehicles in Dhaka city: a case study. | Conference Proceedings | 5th International Conference on Mechanical, Industrial and Energy Engineering | 2018 | Dr. Anjan Goswami | Paper Link |
| Study of heat transfer enhancement in tubular heat exchanger with twisted tape inserts. | Conference Proceedings | 5th International Conference on Mechanical, Industrial and Energy Engineering | 2018 | Dr. Anjan Goswami | Paper Link |
| Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning. | Journal Article | Measurement | 2018 | Dr. Anjan Goswami | Paper Link |
| Optimization of Machining Parameter for Surface Roughness in Turning GFRP Composite Using RSM-GA Approach "Optimization of Machining Parameter for Surface Roughness in Turning GFRP Composite Using RSM-GA Approach | Journal Article | American Journal of Materials Science and Engineering | 2018 | Mr. Sayem Ahmed | Paper Link |
| Fuzzy TOPSIS and Fuzzy ELECTRE-I Approach for Selecting the Best Suppliers by Multiple Criteria | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2018 | Mr. Sayem Ahmed | Paper Link |
| Formulation and Optimization of a Four Echelon Bi-Objective Supply Chain Network Design Model Considering Cost & Time Uncertainty | Journal Article | INTERNATIONAL JOURNAL OF ADVANCED STUDIES IN COMPUTER SCIENCE AND ENGINEERING IJASCSE | 2018 | Mr. Sayem Ahmed | Paper Link |
| Morphological Study of Dispersion Phases in Heterogeneous Waste Form Materials for Efficient Nuclear Waste Containment | Others | 2018 | Dr. Fazle Rabbi | ||
| Optimization of Inventory Cost for Stock Dependent Demand with Normally Distributed Lead Time Considering Complete Backlogging | Journal Article | International Journal of Scientific & Engineering Research | 2018 | Mr. Zahid Hasan Shuvo | |
| Influence of hydrogen on strain localization and fracture behavior in AlZnMgCu aluminum alloys | Journal Article | Acta Materialia | 2018 | Dr. Md. Shahnewaz Bhuiyan | |
| The Role of Hydrogen on the Local Fracture Toughness Properties of 7XXX Aluminum Alloys | Journal Article | Metallurgical and Materials Transactions A | 2018 | Dr. Md. Shahnewaz Bhuiyan | |
| Modelling of the Combined Microstructural and Cutting Edge Effects in Ultraprecision Machining | Journal Article | CIRP Annals | 2018 | Dr. Muhommad Azizur Rahman | Paper Link |
| Modelling of the Combined Microstructural and Cutting Edge Effects in Ultraprecision Machining | Conference Proceedings | 2018 CIRP General Assembly | 2018 | Dr. Muhommad Azizur Rahman | |
| Influence of cutting edge radius on small scale material removal at ultra-precise level | Conference Proceedings | 8th CIRP Conference on High Performance Cutting | 2018 | Dr. Muhommad Azizur Rahman | |
| Influence of cutting edge radius on small scale material removal at ultra-precise level | Journal Article | Procedia CIRP | 2018 | Dr. Muhommad Azizur Rahman | Paper Link |
| Material perspective on the evolution of micro and nano-scale cutting of metal-alloys | Journal Article | Journal of Micromanufacturing | 2018 | Dr. Muhommad Azizur Rahman | Paper Link |
| Influence of Relative Tool Sharpness (RTS) on Different Ultra-precision Machining Regimes of Mg Alloy | Journal Article | The International Journal of Advanced Manufacturing Technology | 2018 | Dr. Muhommad Azizur Rahman | Paper Link |
| Numerical simulation of residential building on the basis of natural ventilation | Conference Proceedings | AIP Conference Proceedings | 2018 | Mr. Md. Tofazzal Hossain | Paper Link |
| Numerical Investigation of Laminar Convective Heat Transfer and Friction Factor of a Pipe by Using Al2O3-Water Nanofluid | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 2018 | Mr. Sazedur Rahman | Paper Link |
| Fuzzy TOPSIS and Fuzzy ELECTRE-I Approach for Selecting the Best Suppliers by Multiple Criteria | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2018 | Mr. Hasin Md. Muhtasim Taqi | |
| Formulation and Optimization of a Four Echelon Bi-Objective Supply Chain Network Design Model Considering Cost & Time Uncertainty | Journal Article | International journal of advanced studies in computer science and engineering | 2018 | Mr. Hasin Md. Muhtasim Taqi | Paper Link |
| Investigating the complementarity between operational and OHS capabilities in the garment industry in Bangladesh | Conference Proceedings | Production and Operations Management Society (POMS) | 2018 | Dr. Abu Hamja | |
| Enabling the creation of synergies between Occupational Health and Safety and Productivity | Conference Proceedings | 5th International EurOMA Sustainable Operations and Supply Chains Forum | 2018 | Dr. Abu Hamja | Paper Link |
| Fabrication and characterization of cellulose nanofiber/graphene oxide blended fibers | Conference Proceedings | 2018 | Mr. Dr. Abdullahil Kafy | ||
| Production of micro-and nanofibrillated cellulose through an aqueous counter collision system followed by ultrasound: Effect of mechanical pretreatments | Journal Article | Journal of Natural Fibers | 2018 | Mr. Dr. Abdullahil Kafy | |
| A survey on advancement of hybrid type 2 fuzzy sliding mode control | Journal Article | Neural Computing and Applications | 2018 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Effects of process parameters on the properties of brake pad developed from seashell as reinforcement material using grey relational analysis | Journal Article | Engineering Science And Technology-An International Journal-JESTECH | 2018 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Influence of Damping on the Bending and Twisting Modes of Flax Fibre-reinforced Polypropylene Composite | Journal Article | Journal of Fibers and Polymers | 2018 | Dr. Md Zillur Rahman | Paper Link |
| Performance of combined PTFE hydrophilic and hydrophobic membrane during laundry/detergent wastewater treatment by air gap membrane distillation (AGMD): an experimental study | Journal Article | DESALINATION AND WATER TREATMENT | 2018 | Dr. Istiaq Jamil Siddique | |
| Computational investigation of turbulent flow development in 180 channel with circular cross section | Journal Article | European Journal of Engineering and Technology Research | 2018 | Mr. Md. Ishtiaque Hossain | |
| Computational investigation of pulsatile blood flow through sinusoidal stenoses of varying lengths | Journal Article | IUT JOURNAL OF ENGINEERING AND TECHNOLOGY (JET), VOL. 14, NO. 1 DECEMBER 2018 | 2018 | Prof. Dr. Md Nurul Absar Chowdhury | |
| The Impact of Human Resource Management on Productivity and Occupational Health and Safety in Readymade Garments. | Conference Proceedings | Int’l Conf. on Ind. and Mech. Engineering and Operations Management | 2017 | Prof. Dr. Mohammad Sarwar Morshed | |
| CFD modelling to study the influence of activation energy and domain size on adsorption dynamics | Conference Proceedings | International Exchange and Innovation Conference on Engineering & Sciences (IEICES) | 2017 | Dr. Mahbubul Muttakin | Paper Link |
| A numerical study on the influence of adsorption heat exchanger geometry on its system performance | Conference Proceedings | International Conference on Polygeneration (ICP) | 2017 | Dr. Mahbubul Muttakin | |
| Investigation of Drag Coefficient at Subcritical and Critical Reynolds Number Region for Circular Cylinder with Helical Grooves | Journal Article | International Journal of Maritime Technology | 2017 | Dr. Dewan Hasan Ahmed | |
| Effect of time-controlled MQL pulsing on surface roughness in hard turning by statistical analysis and artificial neural network | Journal Article | The International Journal of Advanced Manufacturing Technology | 2017 | Dr. Dewan Hasan Ahmed | |
| Investigation of Wave Characteristics with Rotor Type Water Wave Generator | Journal Article | Journal on Today's Ideas-Tomorrow's Technologies | 2017 | Dr. Dewan Hasan Ahmed | |
| Energy Harvest from Water Wave--Bangladesh Prospect | Journal Article | Journal of Thermal Energy Systems | 2017 | Dr. Dewan Hasan Ahmed | |
| Water and thermal management in PEMFCs--influencing parameters and operational conditions: A Review | Journal Article | Journal of Alternative and Renewable Energy Sources | 2017 | Dr. Dewan Hasan Ahmed | |
| Multi-response optimization of end milling parameters under through-tool cryogenic cooling condition | Journal Article | Measurement | 2017 | Dr. Mozammel Mia | Paper Link |
| Optimization of Surface Roughness and Cutting Temperature in High-Pressure Coolant-Assisted Hard Turning using Taguchi Method | Journal Article | International Journal of Advanced Manufacturing Technology | 2017 | Dr. Mozammel Mia | Paper Link |
| Optimization of MQL flow rate for minimum cutting force and surface roughness in end milling of hardened steel (HRC 40) | Journal Article | International Journal of Advanced Manufacturing Technology | 2017 | Dr. Mozammel Mia | Paper Link |
| High pressure coolant on flank and rake surfaces of tool in turning of Ti-6Al-4V: Investigations on forces, temperature and chips | Journal Article | International Journal of Advanced Manufacturing Technology | 2017 | Dr. Mozammel Mia | Paper Link |
| High-pressure coolant on flank and rake surfaces of tool in turning of Ti-6Al-4V: investigations on surface roughness and tool wear | Journal Article | International Journal of Advanced Manufacturing Technology | 2017 | Dr. Mozammel Mia | Paper Link |
| Mono-objective and multi-objective optimization of performance parameters in high pressure coolant assisted turning of Ti-6Al-4V | Journal Article | International Journal of Advanced Manufacturing Technology | 2017 | Dr. Mozammel Mia | Paper Link |
| Effect of time-controlled MQL pulsing on surface roughness in hard turning by statistical analysis and artificial neural network | Journal Article | International Journal of Advanced Manufacturing Technology | 2017 | Dr. Mozammel Mia | Paper Link |
| Performance prediction of high-pressure coolant assisted turning of Ti-6Al-4V | Journal Article | The International Journal of Advanced Manufacturing Technology | 2017 | Dr. Mozammel Mia | Paper Link |
| Effects of internal cooling by cryogenic on the machinability of hardened steel | Journal Article | The International Journal of Advanced Manufacturing Technology | 2017 | Dr. Mozammel Mia | Paper Link |
| Prediction and optimization by using SVR, RSM and GA in hard turning of tempered AISI 1060 steel under effective cooling condition | Journal Article | Neural Computing and Applications | 2017 | Dr. Mozammel Mia | Paper Link |
| Energy Harvest from Water Wave–Bangladesh Prospect | Journal Article | Journal of Thermal Energy Systems | 2017 | Dr. Mozammel Mia | Paper Link |
| Study of surface roughness and cutting forces using ANN, RSM, and ANOVA in turning of Ti-6Al-4V under cryogenic jets applied at flank and rake faces of coated WC tool | Journal Article | The International Journal of Advanced Manufacturing Technology | 2017 | Dr. Mozammel Mia | Paper Link |
| Study of Forced Convection Heat Transfer with Single Phase and Mixture Phase Nanofluid Model at Different Reynolds Numbers | Journal Article | International Organization of Scientific Research (IOSR) | 2017 | Mr. Mir Moniruzzaman Mobin | Paper Link |
| Analysis of the energetics and stability of liquid droplets on textured surfaces with square micropillars. | Conference Proceedings | HEFAT | 2017 | Dr. Anjan Goswami | Paper Link |
| Numerical study of energetics and wetting stability of liquid droplets on microtextured surfaces. | Journal Article | Colloid and Polymer Science | 2017 | Dr. Anjan Goswami | Paper Link |
| Comparison of AHP, Fuzzy Logic and ANFIS Model for Prioritizing Distribution Center with Multiple Criteria | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 2017 | Mr. Sayem Ahmed | Paper Link |
| Finite element analysis of ion transport in solid state nuclear waste form materials | Journal Article | Journal of Nuclear Materials | 2017 | Dr. Fazle Rabbi | |
| Critical path-driven property and performance transitions in heterogeneous microstructures | Journal Article | Journal of Materials Science | 2017 | Dr. Fazle Rabbi | |
| CFD Analysis of a SD 7003 Airfoil with a Local Correlation Based Transition and Turbulence Model | Journal Article | IOP Conference Series: Materials Science and Engineering | 2017 | Prof. Dr. Mazharul Islam | Paper Link |
| Cfd Analysis of SD 7003 Airfoil at Low Reynolds Number with A Laiminar Kinetic Energy Based Transition Model | Journal Article | 2017 | Prof. Dr. Mazharul Islam | Paper Link | |
| Study of Mesh Quality Improvement for CFD Analysis of an Airfoil | Journal Article | Jurnal Teknologi | 2017 | Prof. Dr. Mazharul Islam | |
| Performance Analyses Of Horizontal Axis wind Turbines Using QBlade | Others | 2017 | Prof. Dr. Mazharul Islam | ||
| 3D CFD Analysis of Straight-bladed Vertical Axis Wind Turbine using the General Grid Interface | Journal Article | 2017 | Prof. Dr. Mazharul Islam | ||
| Investigation of Wave Characteristics with Rotor Type Water Wave Generator | Journal Article | Journal on Today's Ideas - Tomorrow's Technologies. | 2017 | Mr. Badhan Saha | Paper Link |
| Inventory Cost Optimization with Normally Distributed Lead Time and Stochastic Demand Considering Fill Rate | Journal Article | International Journal of Scientific & Engineering Research | 2017 | Mr. Zahid Hasan Shuvo | |
| Influence of intermetallic particles on the initiation and growth behavior of hydrogen micropores during high-temperature exposure in Al-Zn-Mg-Cu aluminum alloys | Journal Article | Scripta Materialia | 2017 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Chip Perforation and ‘Burnishing–like’ Finishing of Al Alloy in Precision Machining | Journal Article | Precision Engineering | 2017 | Dr. Muhommad Azizur Rahman | Paper Link |
| Investigation of Critical Edge Radius for the Variation of Ultra-precision Machining Results of Difficult-To-Cut Materials | Conference Proceedings | In Proc. 17th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) | 2017 | Dr. Muhommad Azizur Rahman | |
| Modelling of Flow Stress by Correlating the Material Grain Size and Chip Thickness in Ultra-Precision Machining | Journal Article | International Journal of Machine Tools and Manufacture | 2017 | Dr. Muhommad Azizur Rahman | Paper Link |
| Investigation of the Critical Cutting Edge Radius Based on Material Hardness | Journal Article | The International Journal of Advanced Manufacturing Technology | 2017 | Dr. Muhommad Azizur Rahman | Paper Link |
| Investigation of Flow Stress and Specific Cutting Energy for the Variation of Material Grain Size in Ultra-Precision Machining | Conference Proceedings | 7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2017) | 2017 | Dr. Muhommad Azizur Rahman | |
| Variation of Surface Generation Mechanisms in Ultra-Precision Machining Due to Relative Tool Sharpness (RTS) and Material Properties | Journal Article | International Journal of Machine Tools and Manufacture | 2017 | Dr. Muhommad Azizur Rahman | Paper Link |
| Investigating the role of organizational routines in the creation of synergies between Occupational Health and Safety (OHS) and Productivity | Conference Proceedings | The 24th International Annual EurOMA Conference 2017 - Edinburgh, United Kingdom | 2017 | Dr. Abu Hamja | Paper Link |
| A review paper on Lean and Occupational Health and Safety (OHS) in RMG industry | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy (ICMERE2017) | 2017 | Dr. Abu Hamja | |
| Recent advances on the use of meta-heuristic optimization algorithms to optimize the type-2 fuzzy logic systems in intelligent control | Journal Article | Neural Computing and Applications | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Cuckoo search algorithm-based design of interval Type-2 Fuzzy PID Controller for Furuta pendulum system | Journal Article | Engineering Applications of Artificial Intelligence | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis. | Journal Article | Applied Bionics and Biomechanics. | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar | Journal Article | Solar Energy | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Effect of Mixing Process Parameters and Suitability of Backbone Polymer for Aluminum Powder Injection Molding Feedstock. | Journal Article | SAINS MALAYSIANA | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Predicting the colour properties of viscose knitted fabrics using soft computing approaches. | Journal Article | Journal of the Textile Institute | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar | Journal Article | Solar Energy | 2017 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Static and Dynamic Characterisation of Flax Fibre-Reinforced Polypropylene Composites | Book | 2017 | Dr. Md Zillur Rahman | Paper Link | |
| Impact energy absorption of flax fiber-reinforced polypropylene composites | Journal Article | Journal of Polymer Composites | 2017 | Dr. Md Zillur Rahman | Paper Link |
| Vibration damping of flax fibre-reinforced polypropylene composites | Journal Article | Journal of Fibers and Polymers | 2017 | Dr. Md Zillur Rahman | Paper Link |
| Wastewater treatment by solar air gap multi-stage membrane distillation | Journal Article | European Water | 2017 | Dr. Istiaq Jamil Siddique | Paper Link |
| Development of Economical Overload Detection System for Maritime Vehicles in Bangladesh | Journal Article | Journal of Maritime Research | 2017 | Dr. Istiaq Jamil Siddique | Paper Link |
| Analyzing the Turbulent Flow Characteristics by Utilizing k-εTurbulence Model | Journal Article | European Journal of Engineering and Technology Research | 2017 | Mr. Md. Ishtiaque Hossain | Paper Link |
| A Study of Inventory Replenishment Problems in a Textile Industry-An Application of RAND Algorithm. | Journal Article | International Journal of Mechanical Engineering and Automation | 2016 | Prof. Dr. Mohammad Sarwar Morshed | |
| A Simulation based Approach to Optimize Inventory Replenishment with RAND Algorithm: An Extended Study of Corrected Demand using Holt’s Method for Textile. | Journal Article | American Institute of Physics | 2016 | Prof. Dr. Mohammad Sarwar Morshed | |
| Analysis of Root Causes of Road Congestion Problem in Dhaka City. | Conference Proceedings | International Conference on Mech., Industrial and Energy Engineering | 2016 | Prof. Dr. Mohammad Sarwar Morshed | |
| Fatigue crack growth monitoring in composite bonded lap joints by a distributed fibre optic sensing system and comparison with ultrasonic testing | Journal Article | The Journal of Adhesion | 2016 | Dr. Md. Kharshiduzzaman | Paper Link |
| Strain Profile Measurement for Structural Health Monitoring of Woven Carbon-fiber Reinforced Polymer Composite Bonded joints by Fiber Optic Sensing Using an Optical Backscatter Reflectometer | Journal Article | The Journal of Adhesion | 2016 | Dr. Md. Kharshiduzzaman | Paper Link |
| Pressure and Temperature Response of Pneumatic System with Thermal Consideration | Journal Article | Global Journals Inc. (USA), | 2016 | Dr. Fazlar Rahman | |
| Analysis of Accelerated Flow Over an Insulated Wedge Surface by Using Von Karman-Pohlhausen's Momentum Integral Method | Journal Article | Journal of Mechanical Engineering | 2016 | Dr. Fazlar Rahman | |
| Particles impact characteristics on cutting surface during the abrasive water jet machining: Numerical study | Journal Article | Journal of materials processing technology | 2016 | Dr. Dewan Hasan Ahmed | |
| Prediction of surface roughness in hard turning under high pressure coolant using Artificial Neural Network | Journal Article | Measurement | 2016 | Dr. Mozammel Mia | Paper Link |
| Effects of cutting parameters and machining environments on surface roughness in hard turning using design of experiment | Conference Proceedings | International Conference on Mechanical Engineering | 2016 | Dr. Mozammel Mia | |
| Response surface and neural network based predictive models of cutting temperature in hard turning | Journal Article | Journal of Advanced Research | 2016 | Dr. Mozammel Mia | Paper Link |
| Investigations on surface milling of hardened AISI 4140 steel with pulse jet MQL applicator | Journal Article | Journal of the Institution of Engineers (India): Series C | 2016 | Dr. Mozammel Mia | Paper Link |
| Modeling of Principal Flank Wear: An Empirical Approach Combining the Effect of Tool, Environment and Workpiece Hardness | Journal Article | Journal of The Institution of Engineers (India): Series C | 2016 | Dr. Mozammel Mia | Paper Link |
| Mechanical Properties of betel nut and glass fiber reinforced hybrid polyethylene composites | Journal Article | International journal of Automotive and Mechanical Engineering (IJAME) | 2016 | Mr. Md. Merajul Haque | Paper Link |
| Effect of angle of attack on an optimized vortex induced vibrated energy harvester: A numerical approach. | Journal Article | AIP Conference Proceedings | 2016 | Dr. Anjan Goswami | Paper Link |
| Conformal Analysis of Ion Transport in Heterogeneous Solid State Nuclear Waste Forms | Others | 2016 | Dr. Fazle Rabbi | ||
| Heterogeneous Materials Design for Sustainable Nuclear Waste Storage Using Life Prediction by Conformal Finite Element Analysis | Others | 2016 | Dr. Fazle Rabbi | ||
| Performance and Strength Prediction of Composite Materials Based on Dielectric Property Investigation | Journal Article | 2016 | Dr. Fazle Rabbi | ||
| Heterogeneous Fracture Mechanics Representations of the Effects of Defects from Manufacturing to End of Life | Others | 2016 | Dr. Fazle Rabbi | ||
| Analysis of an Airfoil using a Transition and Turbulence Model | Journal Article | Applied Mechanics and Materials | 2016 | Prof. Dr. Mazharul Islam | |
| CFD Analysis of a SD 7003 Airfoil with a Local Correlation Based Transition and Turbulence Model | Others | 2016 | Prof. Dr. Mazharul Islam | ||
| Combined microtomography, thermal desorption spectroscopy, X-ray diffraction study of hydrogen trapping behavior in 7XXX aluminum alloys | Journal Article | Materials Science and Engineering: A | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Influences of hydrogen micropores and intermetallic particles on fracture behaviors of Al-Zn-Mg-Cu aluminum alloys | Journal Article | Metallurgical and Materials Transactions A | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Corrigendum to “Combined microtomography, thermal desorption spectroscopy, X-ray diffraction study of hydrogen trapping behavior in 7XXX aluminum alloys”[Mater. Sci. Eng. A 655 (2016) 221--228] | Journal Article | Materials Science and Engineering: A | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Fatigue strength scatter characteristics of JIS SUS630 stainless steel with duplex S--N curve | Journal Article | International Journal of Fatigue | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Influences of hydrogen on deformation and fracture behaviors of high Zn 7XXX aluminum alloys | Journal Article | International Journal of Fracture | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Influence of Material Grain Size on Tool Edge Radius Effect and Observations on ‘Burnishing-like’ Mechanism in Micro Turning | Journal Article | In Proc. 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016) | 2016 | Dr. Muhommad Azizur Rahman | |
| Breakthrough Innovations in Tool based Nano-machining | Conference Proceedings | In Proc. 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016) | 2016 | Dr. Muhommad Azizur Rahman | |
| Methodology for baseline study - Project: Productivity and occupational health and safety in the garment industry in Bangladesh (POHS-BD) | Book | 2016 | Dr. Abu Hamja | ||
| An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors | Journal Article | Materials and Manufacturing Processes | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Predicting the Mechanical Properties of Viscose/Lycra Knitted Fabrics Using Fuzzy Technique. | Journal Article | Advances in Fuzzy Systems | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Dyeing process parameters optimization and colour strength prediction for viscose/lycra blended knitted fabrics using Taguchi method. | Journal Article | Journal of the Textile Institute | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Fuzzy Knowledge Based Expert System for Prediction of Color Strength of Cotton Knitted Fabrics | Journal Article | Journal of Engineered Fibres and Fabrics | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring. | Journal Article | Measurement | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| An off-grid stand-alone wave energy supply system with maximum power extraction scheme for green energy utilization in Malaysian Island. | Journal Article | Desalination and Water Treatment | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Prospect of stand-alone wave-powered water desalination system | Journal Article | Desalination and Water Treatment | 2016 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Vibration Damping of Natural Fibre-reinforced Composite Materials | Conference Proceedings | Proceedings of the 17th European Conference on Composite Materials | 2016 | Dr. Md Zillur Rahman | |
| An experimental study on the performance of closed loop pulsating heat pipe (CLPHP) with methanol as a working fluid | Conference Proceedings | INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING: Proceedings of the 11th International Conference on Mechanical Engineering (ICME 2015) | 2016 | Ms. Zaimaa Salsabil | Paper Link |
| Effect of using ethanol and methanol on thermal performance of a closed loop pulsating heat pipe (CLPHP) with different filling ratios | Conference Proceedings | INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING: Proceedings of the 11th International Conference on Mechanical Engineering (ICME 2015) | 2016 | Ms. Zaimaa Salsabil | Paper Link |
| Investigation on Achieving Optimum Surface Roughness by Optimizing Variable Machining Conditions in Turning GFRP Composite Using Taguchi Method and ANOVA | Journal Article | International Journal of Scientific & Engineering Research | 2015 | Mr. Inzamam Ul Haq | |
| Optimization of Machining Parameters for Minimizing Surface Roughness in Turning GFRP Composite Using ANN and PSO Methodology | Conference Proceedings | International Conference on Mechanical Engineering (ICME 2015): AIP Conference Proceedings | 2015 | Mr. Inzamam Ul Haq | |
| Effects of Cutting Parameters and Flow Rate on Cutting Force and Surface Roughness in Surface Milling of Hardened AISI 4140 Steel | Conference Proceedings | International Conference on Mechanical Engineering | 2015 | Dr. Mozammel Mia | |
| Effect of Pulse Jet MQL in Surface Milling of Hardened Steel | Journal Article | Journal of Mechanical Engineering | 2015 | Dr. Mozammel Mia | Paper Link |
| Effect of high pressure coolant jet on cutting temperature, tool wear and surface finish in turning hardened (HRC 48) steel | Journal Article | Journal of Mechanical Engineering | 2015 | Dr. Mozammel Mia | Paper Link |
| Improvement of Productivity in Ready Made Garment Through Line Balancing | Journal Article | Journal of Textile Engineering | 2015 | Dr. Mozammel Mia | |
| Renewable Energy for Rural Development in Bangladesh | Conference Proceedings | International Mechanical Engineering Conference (IMEC) | 2015 | Mr. Sayem Ahmed | Paper Link |
| Heat Transfer Enhancement in Turbulent Flow Through a Circular Tube with Various Arrangements of a Delta Winglet Vortex Generator | Journal Article | International Journal of Energy for a Clean Environment | 2015 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Validated predictive computational methods for surface charge in heterogeneous functional materials: HeteroFoaM™ | Journal Article | Mechanics of Advanced Materials and Modern Processes | 2015 | Dr. Fazle Rabbi | |
| Composite materials damage modeling based on dielectric properties | Journal Article | Materials Sciences and Applications | 2015 | Dr. Fazle Rabbi | |
| CFD Analysis of NACA4415 Airfoil with $\gamma-Re_\theta$ Model considering Natural Transition | Others | 2015 | Prof. Dr. Mazharul Islam | Paper Link | |
| CFD Analysis of SD 7003 Airfoil at Low Reynolds Number with a Laiminar Kinetic Energy based Transition Model | Others | 2015 | Prof. Dr. Mazharul Islam | ||
| Towards Pressure Gradient Sensitive Transitional k-kl-w Model: the Natural Transition for Low Re Airfoils | Others | 2015 | Prof. Dr. Mazharul Islam | Paper Link | |
| Modifications to the k-kL-$\omega$ Transition Model based on Pohlhausen and Falkner-Skan Profiles | Others | 2015 | Prof. Dr. Mazharul Islam | Paper Link | |
| Commercial-Scale Coal- to - SNG Plant: Modeling, Simulation and performance evaluation using Illinois # 6 Coal and IBC low rank coal by Aspen Plus | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy (ICMERE2015) | 2015 | Dr. Abu Hamja | |
| Gulshan Lake-an area of concern, probable threats and extreme consequences”-A case study | Conference Proceedings | In International Conference on Mechanical, Industrial and Materials Engineering | 2015 | Mr. A K M Sarower Kabir | |
| Experimental and Theoretical Investigation of Powder-Binder Mixing Mechanism for Metal Injection Molding | Journal Article | Materials and Manufacturing Processes | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Investigation of Tool Wear and Surface Finish by Analyzing Vibration Signals in Turning Assab-705 Steel | Journal Article | Machining Science And Technology | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Computer Aided Design and Fabrication of A Custom Articulated Ankle Foot Orthosis | Journal Article | Journal Of Mechanics in Medicine and Biology | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Development of a control system for artificially rehabilitated limbs: a review | Journal Article | Biological Cybernetics | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Process Development and Product Quality of Micro-Metal Powder Injection Molding | Journal Article | Materials and Manufacturing Processes | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | |
| Multiple-objective optimization in precision laser cutting of different thermoplastics. | Journal Article | Optics And Lasers In Engineering | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| Technical Study of a Standalone Photovoltaic-Wind Energy Based Hybrid Power Supply Systems for Island Electrification in Malaysia | Journal Article | PLOS ONE | 2015 | Prof. Dr. Imtiaz Ahmed Choudhury | Paper Link |
| EFFECT OF DIFFERENT ELECTRODE SHAPE VARIATION ON SURFACE ROUGHNESS OF MILD STEEL DURING EDM | Journal Article | TECHNICA CORVINIENSIS, Volume 8, Issue-2, Romania. | 2015 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Evaluation of Hybrid Genetic Tabu Search Framework on Job Shop Scheduling Benchmark Problems. | Journal Article | International Journal of Production Research | 2014 | Prof. Dr. Mohammad Sarwar Morshed | |
| Mathematical Modelling and Experimental Validation of Solar Assisted Heat Pump System | Journal Article | IOSR Journal of Mechanical and Civil Engineering | 2014 | Dr. Mahbubul Muttakin | Paper Link |
| Simplified design and fabrication of water sprinkler system: a survey based analysis | Conference Proceedings | 10th International Conference on Mechanical Engineering, ICME 2013 | 2014 | Mr. Amanat Ur Rahman | |
| Corrosion Comparison of Galvanized Steel and Aluminium Im Aqueous Environments | Journal Article | International Journal of Automotive and Mechanical Engineering (IJAME) | 2014 | Mr. Md. Merajul Haque | Paper Link |
| Application of Reengineering Principles in a Local Industry | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) | 2014 | Mr. Sayem Ahmed | Paper Link |
| Fuzzy Model for Prioritizing Distribution Center with Multiple Criteria, a Case Study | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering (ICMIEE) | 2014 | Mr. Sayem Ahmed | Paper Link |
| Review Of Heat Transfer Augmentation Using Delta Winglet Vortex Generators | Conference Proceedings | 15th Annual Paper Meet of Mechanical Division, IEB | 2014 | Mr. Md. Arif Mahmud Shuklo Shoshe | |
| Heat transfer augmentation in turbulent flow through a circular tube with delta winglet vortex generators | Conference Proceedings | 19th Australasian Fluid Mechanics Conference | 2014 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Relationship of dielectric property change to composite material state degradation | Journal Article | Composites Science and Technology | 2014 | Dr. Fazle Rabbi | |
| Meso-design of heterogeneous dielectric material systems: Structure property relationships | Journal Article | Journal of Advanced Dielectrics | 2014 | Dr. Fazle Rabbi | |
| Processing-property relationships in advanced multi-functional composite materials: Management of dielectric behavior | Others | 2014 | Dr. Fazle Rabbi | ||
| Nano-Mechanics foundations and experimental methodologies for multiphysics prognosis of functional behaviour in heterogeneous functional materials (HeteroFoaM) | Journal Article | Procedia IUTAM | 2014 | Dr. Fazle Rabbi | |
| Chapter 3: Design of Darrieus-Type Wind Turbines | Others | 2014 | Prof. Dr. Mazharul Islam | ||
| Evaluation of the Prospects of Using Solar Thermal Air-Conditioning Systems in Saudi Arabia | Others | 2014 | Prof. Dr. Mazharul Islam | ||
| Evaluation of the Prospects of Using Solar Thermal Air-Conditioning Systems in Saudi Arabia | Journal Article | Applied Mechanics and Materials | 2014 | Prof. Dr. Mazharul Islam | Paper Link |
| Analysis of an Airfoil using a Transition and Turbulence Model | Others | 2014 | Prof. Dr. Mazharul Islam | ||
| A Study on Catalytic Steam Gasification of HCK Coal by Changing Operating Temperature at Fixed Bed Reactor | Conference Proceedings | Summer Conference, Korea Institute of Energy and Climate Change | 2014 | Dr. Abu Hamja | |
| Modeling of low rank coal and biomass co-gasification for production of syngas by Aspen Plus | Conference Proceedings | Winter Conference, Korea Institute of Energy and Climate Change | 2014 | Dr. Abu Hamja | |
| Single Polymer Composites of Poly(Butylene Terephthalate) Microfibrils Loaded with Carbon Nanotubes Exhibiting Electrical Conductivity and Improved Mechanical Properties | Journal Article | Journal of Macromolecular Materials and Engineering | 2014 | Dr. Md Zillur Rahman | Paper Link |
| Experimental Analysis of Wetting Delay during Jet Impingement Quenching of High Temperature Brass Block | Journal Article | Procedia Engineering | 2013 | Mr. Md. Jubayer Hossain | Paper Link |
| Study and performance simulation of passive suspension system using MATLAB/SIMULINK | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 2013 | Mr. Md. Jubayer Hossain | |
| Corrosion of Galvanized Steel and Copper in Aqueous Environments | Journal Article | Journal of Mechanical Engineering | 2013 | Mr. Md. Merajul Haque | Paper Link |
| Corrosion Behaviour Of Galvanized Steel And Its Subtitutes In Various Environments | Conference Proceedings | International Conference on Mechanical, Industrial and Materials Engineering | 2013 | Mr. Md. Merajul Haque | Paper Link |
| The Effect of Constituent, Interfacial Properties and Morphology on the Dielectric Response of MIEC Membranes | Journal Article | Carbon Dioxide Management and Other Technologies | 2013 | Dr. Fazle Rabbi | |
| A dielectric spectroscopy method of directly assessing composite micro-state evolution during manufacturing and deformation | Journal Article | Society for the Advancement of Material and Process Engineering (SAMPE) | 2013 | Dr. Fazle Rabbi | |
| Multiphysics design and development of heterogeneous functional materials for renewable energy devices: the HeteroFoaM story | Journal Article | Journal of The Electrochemical Society | 2013 | Dr. Fazle Rabbi | |
| Role of micromorphology and interfacial mismatch in the design of heterogeneous functional materials for fuel cell applications | Others | 2013 | Dr. Fazle Rabbi | ||
| Analysis of the plug-in hybrid electric vehicle for the smart grid of Canada | Journal Article | International Journal of Environmental Studies | 2013 | Prof. Dr. Mazharul Islam | Paper Link |
| Fatigue life prediction of sus 630 (H900) steel under high cycle loading | Journal Article | Acta Mechanica Solida Sinica | 2013 | Dr. Md. Shahnewaz Bhuiyan | |
| PHASE CHANGE MATERIALS: Characteristics and Encapsulation | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy (ICMERE2013) | 2013 | Dr. Abu Hamja | |
| Fabrication, morphologies and properties of single polymer composites based on LLDPE, PP, and CNT loaded PBT | Book | 2013 | Dr. Md Zillur Rahman | Paper Link | |
| A hybrid genetic tabu search algorithm for solving job shop scheduling problems: a case study. | Journal Article | Journal of Intelligent Manufacturing | 2012 | Prof. Dr. Mohammad Sarwar Morshed | |
| Optical Trapping Forces on Non-Spherical Particles in Fluid Flows | Journal Article | International Journal of Optomechatronics | 2012 | Dr. Dewan Hasan Ahmed | |
| HeteroFoaMs: Electrode modeling in nanostructured heterogeneous materials for energy systems | Journal Article | Journal of Fuel Cell Science and Technology | 2012 | Dr. Fazle Rabbi | |
| Heterofoam: New concepts and tools for heterogeneous functional material design | Journal Article | Advances in Materials Science for Environmental and Energy Technologies: Ceramic Transactions | 2012 | Dr. Fazle Rabbi | |
| Relationship of micromophology to charge storage and transfer properties in heterogeneous functional materials | Others | 2012 | Dr. Fazle Rabbi | ||
| Multi-Physics Functional Design of HeteroFoaM Nanomaterials for Energy Systems | Others | 2012 | Dr. Fazle Rabbi | ||
| Performance analyses of a fixed-pitch straight-bladed VAWT with selected low Reynolds number airfoils | Journal Article | International Journal of Environmental Studies | 2012 | Prof. Dr. Mazharul Islam | Paper Link |
| Renewable-energy education for mechanical engineering undergraduate students | Journal Article | International Journal of Mechanical Engineering Education | 2012 | Prof. Dr. Mazharul Islam | Paper Link |
| The influence of mechanical surface treatments on fatigue behavior of extruded AZ61 magnesium alloy | Journal Article | Materials Science and Engineering: A | 2012 | Dr. Md. Shahnewaz Bhuiyan | |
| “ Identification of machined surfaces using digital image processing”, | Journal Article | International Journal of Engineering. Issue X, 2012, Vol-1, pp 213-228. | 2012 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Surface roughness optimization of EDM for circular copper electrode by RSM-GA approach” | Journal Article | International Journal of Engineering, | 2012 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Multi-objective Genetic Algorithms for Scheduling of Radiotherapy Treatments for Categorised Cancer Patients | Journal Article | Journal of Expert Systems with Applications | 2011 | Prof. Dr. Mohammad Sarwar Morshed | |
| Optical forces on non-spherical nanoparticles trapped by optical waveguides | Journal Article | International Journal of Optomechatronics | 2011 | Dr. Dewan Hasan Ahmed | |
| Simulation of non-Newtonian ink transfer between two separating plates for gravure-offset printing | Journal Article | International Journal of Heat and Fluid Flow | 2011 | Dr. Dewan Hasan Ahmed | |
| Non-Newtonian ink transfer in gravure--offset printing | Journal Article | International journal of heat and fluid flow | 2011 | Dr. Dewan Hasan Ahmed | |
| Performance of sub-cooled PEMFCs | Journal Article | International journal of energy research | 2011 | Dr. Dewan Hasan Ahmed | |
| Design and development of an electric hybrid rickshaw. | Conference Proceedings | International Conference on Mechanical Engineering | 2011 | Dr. Anjan Goswami | Paper Link |
| Experimental Mechanics for Prognosis of Material State Changes in Heterogeneous Materials for Energy Systems | Others | 2011 | Dr. Fazle Rabbi | ||
| Effect of Porous Electrode Morphology on Broadband Dielectric Characteristics of SOFC and Methodologies for Analytical Predictions | Others | 2011 | Dr. Fazle Rabbi | ||
| Design analysis of a smaller-capacity straight-bladed VAWT with an asymmetric airfoil | Journal Article | International Journal of Sustainable Energy | 2011 | Prof. Dr. Mazharul Islam | Paper Link |
| Corrosion fatigue behavior of conversion coated and painted AZ61 magnesium alloy | Journal Article | International Journal of Fatigue | 2011 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Corrosion fatigue behavior of die-cast and shot-blasted AM60 magnesium alloy | Journal Article | Materials Science and Engineering: A | 2011 | Dr. Md. Shahnewaz Bhuiyan | |
| “Development of microcontroller based controlling unit for flexible control of Robot Structure” ACTA TECHNICA CORVINIENSIS Vol. 2 Issue 6 2011 pp 105-108. | Journal Article | ACTA TECHNICA CORVINIENSIS Vol. 2 Issue 6 2011 pp 105-108. | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Design and Implementation of an Articulated Robotic Arm for Precise Positioning” | Journal Article | Advanced Materials Research Vols. 201-203 (2011) pp 1972-1977 Trans Tech Publications, Switzerland. | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| ”3-D Contour generation and determination of surface roughness of sheet and horizontally milled plate using Digital Image Processing. | Journal Article | International Journal of Engineering, Vol.3 Issue 9 pp 127-130, 2011. | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Investigation of the effect of rectangular and trapezium cross section of gating system by CFD Simulation in permanent mould casting of Al-Alloy.” | Journal Article | International Journal of Advanced Science and Information Technique. Vol.-2, Issue-3 pp 4-8, 2011. | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Detection, Categorization, and Assessment of Eye Cataracts Using Digital Image Processing”. | Journal Article | International Journal of Computer, The Internet and Management (IJCIM), Vol.-19, No.SP-1, ISSN0858702, 2011 | 2011 | Prof. Dr. Md Nurul Absar Chowdhury | |
| The geometrical design of membraneless micro fuel cells: Failure and success | Journal Article | International journal of energy research | 2010 | Dr. Dewan Hasan Ahmed | |
| Relationship of micro-structure morphology to impedance in heterogeneous functional materials | Others | 2010 | Dr. Fazle Rabbi | ||
| Fixed-Pitch Straight-Bladed Vertical Axis Wind Turbine: Design Challenges and Prospective Applications | Others | 2010 | Prof. Dr. Mazharul Islam | ||
| Investigation of Smaller-Capacity Fixed-pitch SB-VAWT for Urban Rooftops | Others | 2010 | Prof. Dr. Mazharul Islam | ||
| Could Saudi Arabia have a major contribution in renewable energy in the near-to-long term future? | Others | 2010 | Prof. Dr. Mazharul Islam | ||
| Thermal Design Correlations for Single- and Two-Phase flow in Meso-Scale Heat Exchangers | Others | 2010 | Prof. Dr. Mazharul Islam | ||
| Corrosion fatigue behavior of extruded magnesium alloy AZ80-T5 in a 5\% NaCl environment | Journal Article | Engineering Fracture Mechanics | 2010 | Dr. Md. Shahnewaz Bhuiyan | |
| Corrosion fatigue behavior of conversion coated AZ61 magnesium alloy | Journal Article | Materials Science and Engineering: A | 2010 | Dr. Md. Shahnewaz Bhuiyan | |
| Surface roughness characterization using digital image processing technique | Journal Article | 2010 | Prof. Dr. Md Nurul Absar Chowdhury | ||
| Scheduling: Manufacturing to Healthcare Organisation | Others | 2009 | Prof. Dr. Mohammad Sarwar Morshed | ||
| Knowledge Base GA Scheduling of Radiotherapy Cancer Patients. | Others | 2009 | Prof. Dr. Mohammad Sarwar Morshed | ||
| Multi-objective Scheduling of Radiotherapy Cancer Patients | Conference Proceedings | The 23rd European Conferences on Operational Research (EURO 2009) | 2009 | Prof. Dr. Mohammad Sarwar Morshed | |
| Genetic Algorithm Based Scheduling of Radiotherapy Treatments for Cancer Patients | Journal Article | Artificial Intelligence in Medicine | 2009 | Prof. Dr. Mohammad Sarwar Morshed | |
| Multi-objective Scheduling of Radiotherapy Cancer Patients. | Others | 2009 | Prof. Dr. Mohammad Sarwar Morshed | ||
| An H-shaped design for membraneless micro fuel cells | Journal Article | Electrochimica Acta | 2009 | Dr. Dewan Hasan Ahmed | |
| Investigation of low Reynolds number airfoils for fixed- pitch straight-bladed VAWT | Others | 2009 | Prof. Dr. Mazharul Islam | Paper Link | |
| Analysis of Three Selected Design Parameters related to a Fixed-pitch Straight-Bladed Vertical Axis Wind Turbine | Others | 2009 | Prof. Dr. Mazharul Islam | ||
| Computational Analysis of a High-Lift and Low Reynolds Number Airfoil at Turbulent Atmospheric Conditions | Others | 2009 | Prof. Dr. Mazharul Islam | Paper Link | |
| Two Stage S-N curve in Corrosion Fatigue of Extruded Magnesium alloy AZ31 | Journal Article | Songklanakarin Journal of Science and Technology (SJST) | 2009 | Dr. Md. Shahnewaz Bhuiyan | |
| “An Approach to Relate and Optimize Metal Forming Process Parameters by Fuzzy Logic”, | Journal Article | AMSE Journal, France, 2009. | 2009 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Radiotherapy Scheduling for Cancer Treatment using Metaheuristic | Conference Proceedings | OR50 | 2008 | Prof. Dr. Mohammad Sarwar Morshed | |
| Optimum geometrical design for improved fuel utilization in membraneless micro fuel cell | Journal Article | Journal of Power Sources | 2008 | Dr. Dewan Hasan Ahmed | |
| Reactants flow behavior and water management for different current densities in PEMFC | Journal Article | International journal of heat and mass transfer | 2008 | Dr. Dewan Hasan Ahmed | |
| Effect of GDL permeability on water and thermal management in PEMFCs—I. Isotropic and anisotropic permeability | Journal Article | International Journal of Hydrogen Energy | 2008 | Dr. Dewan Hasan Ahmed | |
| Design of a deflected membrane electrode assembly for PEMFCs | Journal Article | International Journal of Heat and Mass Transfer | 2008 | Dr. Dewan Hasan Ahmed | |
| Effect of GDL permeability on water and thermal management in PEMFCs—II. Clamping force | Journal Article | International journal of hydrogen energy | 2008 | Dr. Dewan Hasan Ahmed | |
| Analysis of Fixed-Pitch Straight-Bladed VAWT with Asymmetric Airfoils | Others | 2008 | Prof. Dr. Mazharul Islam | Paper Link | |
| Aerodynamic models for Darrieus-type straight-bladed vertical axis wind turbines | Journal Article | Renewable and Sustainable Energy Reviews | 2008 | Prof. Dr. Mazharul Islam | Paper Link |
| Performance Analysis of a Smaller-capacity Straight-bladed VAWT with Prospective Airfoils | Others | 2008 | Prof. Dr. Mazharul Islam | ||
| Designing straight-bladed vertical axis wind turbine using the cascade theory | Others | 2008 | Prof. Dr. Mazharul Islam | Paper Link | |
| Design Analysis of Fixed-pitch Straight-bladed Vertical Axis Wind Turbines with an Alternative Material | Others | 2008 | Prof. Dr. Mazharul Islam | ||
| Selection of Airfoils for Straight-Bladed Vertical Axis Wind Turbines Based on Desirable Aerodynamic Characteristics | Others | 2008 | Prof. Dr. Mazharul Islam | Paper Link | |
| A new airfoil for the supporting struts of smaller-capacity straight-bladed VAWT BT - 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, MAO, September 10, 2008 - September 12, 2008 | Others | 2008 | Prof. Dr. Mazharul Islam | ||
| Analysis of the Design Parameters related to a Fixed-pitch Straight-Bladed Vertical Axis Wind Turbine | Journal Article | Wind Engineering | 2008 | Prof. Dr. Mazharul Islam | Paper Link |
| Corrosion fatigue behavior of extruded magnesium alloy AZ61 under three different corrosive environments | Journal Article | International Journal of Fatigue | 2008 | Dr. Md. Shahnewaz Bhuiyan | |
| High Cycle Fatigue Behavior of Magnesium Alloys under Corrosive Environment | Journal Article | Key Engineering Materials | 2008 | Dr. Md. Shahnewaz Bhuiyan | |
| “Design of a Computer Vision Integrated Solid Handling System to Teach Manufacturing Automation to Third Year Undergraduate Students”, | Journal Article | Australian Journal of Basic and Applied Sciences, Volume-2, Issue-4,2008 Pages: 1139-1147, Australia (ISSN: 1991-81 | 2008 | Prof. Dr. Md Nurul Absar Chowdhury | |
| A hybrid configuration for solving job shop scheduling problems | Conference Proceedings | The 8th Asia Pacific Industrial Eng. and Management Conference (APIEMS 2007) | 2007 | Prof. Dr. Mohammad Sarwar Morshed | |
| Local current density and water management in PEMFCs | Journal Article | International journal of heat and mass transfer | 2007 | Dr. Dewan Hasan Ahmed | |
| Aerodynamic Factors Affecting Performance of Straight-Bladed Vertical Axis Wind Turbines | Others | 2007 | Prof. Dr. Mazharul Islam | Paper Link | |
| Desirable Airfoil Features for Smaller-Capacity Straight-Bladed VAWT | Journal Article | Wind Engineering | 2007 | Prof. Dr. Mazharul Islam | Paper Link |
| Assessment of the small‐capacity straight‐bladed VAWT for sustainable development of Canada | Journal Article | International Journal of Environmental Studies | 2007 | Prof. Dr. Mazharul Islam | Paper Link |
| Design of a Special-purpose Airfoil for Smaller-Capacity Straight-Bladed VAWT | Journal Article | Wind Engineering | 2007 | Prof. Dr. Mazharul Islam | Paper Link |
| “Development of a multi criteria and parameter Optimization tool for the Cutting Conditions for Turning process” | Journal Article | International Journal of Mechanical and Materials Engineering, Faculty of Engineering, University of Malaya, Malaysia.,Vol-2, No.-1, pag | 2007 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Development and evolution of a computer assisted real-time control system for a converted CNC lathe”, | Journal Article | International Journal of Manufacturing Research, Inderscience Publishers, USA, 2007. | 2007 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Surface quality improvement of a machined surface using a newly designed cylindrical Surface rolling tool”, | Journal Article | Journal of The Institution of Engineers, Bangladesh, Multidisciplinary, Vol. Mul-dis 32, No. 1 December-2007, page: 103-108. | 2007 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Numerical study for the effect of inlet humidity condition at PEMFC channel | Journal Article | Transactions of the Korean Society of Mechanical Engineers B | 2006 | Dr. Dewan Hasan Ahmed | |
| Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density | Journal Article | Journal of Power Sources | 2006 | Dr. Dewan Hasan Ahmed | |
| Effective renewable energy activities in Bangladesh | Journal Article | Renewable Energy | 2006 | Prof. Dr. Mazharul Islam | Paper Link |
| Renewable Energy Powered Rural Community Development Centres in the Developing Countries | Others | 2006 | Prof. Dr. Mazharul Islam | Paper Link | |
| Development of Micropin Fabrication Process Using Tool Based Micro-Machining | Journal Article | The International Journal of Advanced Manufacturing Technology | 2006 | Dr. Muhommad Azizur Rahman | Paper Link |
| "Designing and study of a Material Handling System with auto-synchronizing technique for flexible productivity control" | Journal Article | International Journal of Engineering & Technology (IJET), volume 3 issue 1, page 7-16, June 2006 | 2006 | Prof. Dr. Md Nurul Absar Chowdhury | |
| ”Development of an Automated Process Planning system for a rectangular Milling Object” " | Journal Article | International Journal of Engineering & Technology (IJET), volume 3 issue 3,page 58-63, December 2006 | 2006 | Prof. Dr. Md Nurul Absar Chowdhury | |
| "Simulation of the plastic field in the deformation zone of surface rolling tools under variable work hardening conditions" | Journal Article | Journal of Engineering and Technology (JET), Vol. 5 No. 1 January-June 2006.Pages 1-20. | 2006 | Prof. Dr. Md Nurul Absar Chowdhury | |
| Development of an optimization technique by Fuzzy logic to predict the optimum process parameter for Deep drawing process" ”, | Journal Article | AMSE Journal, France, Best-of Book 2006 of AMSE Conferences, pp. 37-46. | 2006 | Prof. Dr. Md Nurul Absar Chowdhury | |
| A Job Shop Scheduling Systems and its Application to Real Life Problems | Conference Proceedings | ICMPM 2005 | 2005 | Prof. Dr. Mohammad Sarwar Morshed | |
| Small-scale decentralized renewable energy systems for the remote communities of the developing countries | Others | 2005 | Prof. Dr. Mazharul Islam | Paper Link | |
| Prospects of Solar Energy Applications in the Off-Shore Islands of Bangladesh | Others | 2005 | Prof. Dr. Mazharul Islam | ||
| Applications of Vertical Axis Wind Turbines for Remote Areas | Others | 2005 | Prof. Dr. Mazharul Islam | ||
| Status of Renewable Energy Technologies in Bangladesh | Journal Article | ISESCO Science {\&} Technology Vision | 2005 | Prof. Dr. Mazharul Islam | |
| Photovoltaic for sustainable livelihoods in off-grid areas of Bangladesh | Others | 2005 | Prof. Dr. Mazharul Islam | ||
| CNC Microturning: an application to miniaturization | Journal Article | International Journal of Machine Tools and Manufacture | 2005 | Dr. Muhommad Azizur Rahman | Paper Link |
| Hybrid Procedure of Job Shop Scheduling | Conference Proceedings | The 21st International Manufacturing Conference (ICM21) | 2004 | Prof. Dr. Mohammad Sarwar Morshed | |
| Initial Solutions and Hybrid Model of Job Shop Scheduling | Others | PREP 2004 proceedings | 2004 | Prof. Dr. Mohammad Sarwar Morshed | |
| A Single Criterion Job Shop Scheduling Using Hybrid Procedure of GATS | Journal Article | Computer Science and Engineering Research Journal | 2004 | Prof. Dr. Mohammad Sarwar Morshed | |
| Modelling of the Abrasive Water jet Cutting Process | Journal Article | Wear | 2004 | Dr. Dewan Hasan Ahmed | |
| Prospects of Renewables for Rural Electrification in Bangladesh | Others | 2004 | Prof. Dr. Mazharul Islam | ||
| Solar Energy Options for the Off-grid Areas in the LDCs | Journal Article | Development | 2004 | Prof. Dr. Mazharul Islam | |
| Status of Renewable Energy Technologies in Bangladesh | Others | 2004 | Prof. Dr. Mazharul Islam | ||
| Current utilization and future prospects of emerging renewable energy applications in Canada | Journal Article | Renewable and Sustainable Energy Reviews | 2004 | Prof. Dr. Mazharul Islam | Paper Link |
| The Climate Change Convention: Bangladesh Perspective | Journal Article | Projukti Special Edition, Bangladesh Institution of Engineers, Dhaka Center, Bangladesh | 2003 | Prof. Dr. Mazharul Islam | |
| Renewable Energy Resources for Sustainable Development of Bangladesh | Others | 2003 | Prof. Dr. Mazharul Islam | ||
| Vertical Axis Wind Turbines: Past Initiatives \& Future Prospects | Others | 2003 | Prof. Dr. Mazharul Islam | ||
| Fabrication of Miniature Components using Microturning Process | Conference Proceedings | 5th International Conference on Mechanical Engineering (ICME) | 2003 | Dr. Muhommad Azizur Rahman | |
| Assessment of Renewable Energy Resources Of Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Utilization of Renewable Energies in Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Anthropogenic Climate Change | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Renewable Energy Scenario: Bangladesh Perspective | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Proposal for a Micro Hydro Power Plant at Teesta Canal In Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Energy Efficiency Potentials in the Power Sector of Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Renewable Energy Prospects {\&} Trends in Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Satellite Remote Sensing Applications for Renewable Energy Technologies | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Energy Audit of Ashuganj Power Station Complex | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Investment Opportunities for Renewable Energy Technologies in Selected Countries | Others | 2001 | Prof. Dr. Mazharul Islam | ||
| Framework for Accelerating the Use of Renewable Energy Technologies in Bangladesh | Others | 2001 | Prof. Dr. Mazharul Islam | ||
| 2{\_}Journal{\_}of{\_}Mechanical{\_}Engineering{\_}2000.pdf | Journal Article | Journal of Mechanical Engineering | 2000 | Prof. Dr. Mazharul Islam | |
| Solar PV Program of Bangladesh Power Development Board | Others | 2000 | Prof. Dr. Mazharul Islam | ||
| Energy Roundup | Others | 1999 | Prof. Dr. Mazharul Islam | ||
| Renewable Energy Sources | Journal Article | Engineering News, Institution of Engineers, Dhaka, Bangladesh | 1999 | Prof. Dr. Mazharul Islam | |
| 1{\_}Journal{\_}of{\_}Energy{\_}Nov99.pdf | Journal Article | Journal of Energy {\&} Environment | 1999 | Prof. Dr. Mazharul Islam | |
| Utilization of Renewable Energy in Bangladesh Power Development Board | Others | 1999 | Prof. Dr. Mazharul Islam | ||
| Solar Photovoltaic Installations in Bangladesh Power Development Board | Others | 1999 | Prof. Dr. Mazharul Islam | ||
| The Internet | Journal Article | Engineering News, Institution of Engineers, Dhaka, Bangladesh | 1999 | Prof. Dr. Mazharul Islam | |
| Theoretical Investigation of Performance Characteristics and Design of VAWT with Pitching | Others | 1998 | Prof. Dr. Mazharul Islam | ||
| Numerical investigation of convective heat transfer characteristics of circular and oval tube banks with vortex generators | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| Influence of alkalisation and eggshell particles on mechanical, thermal and physical properties of rattan-bamboo fibre reinforced hybrid polyester laminated composite | Journal Article | Advances in Materials and Processing Technologies | 0 | Dr. Mohammad Rejaul Haque | |
| Numerical investigation of heat transfer performance for rectangular, elliptical, and airfoil shaped pin fin heatsinks through the novel combination of perforation and bulge inserts | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| Experimental Investigation of Condensation and Freezing Phenomenon on Hydrophilic and Hydrophobic Titanium Nanopillared Glass Surfaces | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| Accelerated freezing due to droplet pinning on a nanopillared surface | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| Droplet Growth Dynamics during Atmospheric Condensation on Nanopillar Surfaces | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| EFFECT OF DIFFERENT FIBERS LOADING ON PALM AND ARAMID FIBER REINFORCED HYBRID EPOXY COMPOSITE | Journal Article | Advances in Materials and Processing Technologies, Taylor & Francis | 0 | Mr. Md. Merajul Haque | |
| PHYSICO-MECHANICAL PROPERTIES INVESTIGATION OF SPONGE-GOURD AND BETEL NUT REINFORCED HYBRID POLYESTER COMPOSITES | Journal Article | Advances in Materials and Processing Technologies, Taylor & Francis | 0 | Mr. Md. Merajul Haque | |
| Study of Heat Transfer Enhancement in Tubular Heat Exchanger with Twisted Tape Inserts | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 0 | Mr. Sadman Hassan Labib | Paper Link |
| Multi-Criteria Decision Making Models for Performance Evaluation and Selection of Suppliers applying Fuzzy TOPSIS and DEA | Journal Article | International Journal of Applications of Fuzzy Sets and Artificial Intelligence | 0 | Mr. Kazi Safowan Shahed | |
| “ Analysis of Supply Chain Efficiency and Suggestions for improvement, A CASE STUDY ” Proceedings of the International Conference on Mechanical, Industrial & Energy Engineering (ICMIEE), 2014. ISBN: 978-984-33-8429, ISSN: 2409-7365 | Conference Proceedings | 0 | Mr. A K M Sarower Kabir | ||
| Eco-friendly food packaging innovations: A review of recent progress on recyclable polymers | Book | In Book: Reference Module in Materials Science and Materials Engineering | 0 | Dr. Md Zillur Rahman | Paper Link |
| Green synthesis of CuO nanoparticles for biological applications | Journal Article | Inorganic Chemistry Communications | 0 | Dr. Md Zillur Rahman | Paper Link |
| “Development of a mathematical model for Elastic Field simulation during unloading condition in Surface Burnishing Processes”, | Journal Article | Journal of Engineering, TOME VI (2008), Page: 55-64, Annals of faculty of Engineering Hunedoara Romania, 2008. | 0 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Ride Comfort of a 4 DOF Nonlinear Heavy Vehicle Suspension” I | Journal Article | SESCO JOURNAL of Science and Technology Volume 8, Number 13, May 2012 (80-85). | 0 | Prof. Dr. Md Nurul Absar Chowdhury | |
| " Design and Construction of a coordinate measuring machine and computerized simulation of a measuring object with flexible means of performing accurate and fast dimensional inspection of objects" | Journal Article | ournal of Mechanical Engineering, JME (IEB) IEB, Vol. ME 35, June issue 2006, page 67-76. | 0 | Prof. Dr. Md Nurul Absar Chowdhury | |
| “Optimization of blank `holding force in deep drawing process by fuzzy logic”, | Journal Article | Journal of Engineering and Technology, Vol. 6 No. 1 January – June 2007, Islamic University of Technology (IUT), OIC, Bangladesh, pp. 29-39. | 0 | Prof. Dr. Md Nurul Absar Chowdhury |
Faculty of Engineering
Ahsanullah University of Science and Technology
141 & 142, Love Road, Tejgaon Industrial Area, Dhaka-1208
Tel. (8802) 8870422, Ext. 107, 114, Fax : (8802) 8870418
Email: info@aust.edu, regr@aust.edu