Department of
| Title | Type | Journal Name | Year | Author | URL |
|---|---|---|---|---|---|
| Societal Impact of Recycling Waste into Composite Materials | Journal Article | Societal Impacts | 2024 | Dr. Fazlar Rahman | Paper Link |
| Experimental and Numerical Study of Conical-Shaped Pin Finned Heat Sink with PCM Material | Journal Article | Malaysian Journal on Composites Science and Manufacturing | 2024 | Dr. Fazlar Rahman | Paper Link |
| Mechanical characterizations of waste face masks reinforced polyester composites: Recycling wastes into resources | Journal Article | Heliyon | 2024 | Dr. Fazlar Rahman | Paper Link |
| Measurement and Controlling Friction Force in a Sliding Microwire by Size and Boundary Condition Variation | Conference Proceedings | Proceedings of ICME 2023,14th International Conference on Mechanical Engineering, 18-19 December 2023, BUET, Dhaka | 2024 | Dr. Fazlar Rahman | |
| Efect of Sesbania grandifora stem fber reinforcement on mechanical, chemical, thermal, and physical properties of vinyl ester material | Journal Article | Biomass Conversion and Biorefnery | 2024 | Dr. Fazlar Rahman | Paper Link |
| Effect of fiber orientation on mechanical properties of betel nut (areca palm) stem fiber reinforced laminated polyester composites | Journal Article | Advances in Materials and Processing Technologies | 2024 | Dr. Fazlar Rahman | Paper Link |
| Fundamental of Finite Element Analysis (FEA) and Solving Stiffness Matrix by Newton-Raphson Method | Journal Article | Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh | 2024 | Dr. Fazlar Rahman | Paper Link |
| Non-simultaneous impact of droplet pairs on solid surfaces | Journal Article | Physics of Fluids | 2024 | Dr. Anjan Goswami | Paper Link |
| Efect of Sesbania grandifora stem fber reinforcement on mechanical, chemical, thermal, andphysical properties of vinyl ester material | Journal Article | Biomass Conversion and Biorefinery | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Characterization of Mechanical Properties of Woven Jute, Kenaf & Woven E-Glass Hybrid Composite Laminates and their Response to Low Velocity Impact | Conference Proceedings | Proceedings of ICME 2023 14th International Conference on Mechanical Engineering 18-19 December 2023, BUET, Dhaka, Bangladesh | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Tensile Properties of 3D-Printed Jute-Reinforced Composites via Stereolithography | Journal Article | Applied Mechanics | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Stacking Sequence and Weight Fraction Effect on Tensile and Flexural Properties of Woven Jute and Woven Carbon-Jute Reinforced Polyester Composites | Conference Proceedings | IOP Conf. Series: Materials Science and Engineering | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Enhancement of Additively Manufactured Bagasse Fiber-Reinforced Composite Material Properties Utilizing a Novel Fiber Extraction Process Used for 3D SLA Printing | Journal Article | Journal of Manufacturing and Materials Processing | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Evaluation of the Mechanical Properties of a Novel Hybrid Composite Composed of Rattan and Date Palm Fiber: An Experimental Study | Journal Article | Advances in Polymer Technology | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| FEM Simulation of Dry Machining Using Ansys Workbench | Conference Proceedings | Proceedings of ICME 2023 14th International Conference on Mechanical Engineering, SSRN | 2024 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Additive manufacturing-based composites for sensors and other applications | Book | 2024 | Mr. Mohammad Joynal Abedin | Paper Link | |
| Recent developments in functional plant fiber-based composites and their engineering applications | Book | 2024 | Mr. Mohammad Joynal Abedin | Paper Link | |
| Advances in the performance of engineered cementitious composites under extreme conditions | Book | 2024 | Mr. Mohammad Joynal Abedin | Paper Link | |
| A Comprehensive Analysis and Ranking of Barriers to implement lean practices in chemical management of Leather Tanning Industries in Bangladesh | Conference Proceedings | Proceedings of the 6th Industrial Engineering and Operations Management | 2024 | Dr. Abu Hamja | Paper Link |
| Numerical investigation of the enhancement of the aerodynamic performance for newly modified blended airfoils utilizing S809, S829, and NACA 2412 baseline shapes | Journal Article | Arabian Journal for Science and Engineering | 2024 | Dr. Abu Hamja | Paper Link |
| Improving Occupational Health Condition and Implementing 5S in the Leather Tanning Industry: An Initiative Towards Sustainability | Conference Proceedings | 1st International Conference on Science and Technology for Sustainable Development 2024 (ICSTSD2024) | 2024 | Dr. Abu Hamja | |
| Improving Occupational Health and Sustainability of Leather Industry in Bangladesh: An Initiative of SusLeather Project | Conference Proceedings | 1st International Conference on Science and Technology for Sustainable Development 2024 (ICSTSD2024) | 2024 | Dr. Abu Hamja | |
| Recent trends in the customization of sensor materials for biomedical applications | Book | In Book: Materials Science and Materials Engineering | 2024 | Mr. Mohammad Ali Noor Zaman | Paper Link |
| Hybrid synthetic fibers: composites and automotive applications | Book | In book: Synthetic and Mineral Fibers, Their Composites and Applications | 2024 | Mr. Mohammad Ali Noor Zaman | Paper Link |
| Production of syngas from oil palm shell biomass using microwave gasification | Journal Article | Energy | 2024 | Dr. Istiaq Jamil Siddique | Paper Link |
| Hydro-Thermal and Entropy Generation Effects of Helical Tube Heat Exchanger across Different Dean Numbers with Novel Filleted-Hexagonal Profile using Sio2-Zno/Water Hybrid Nanofluid | Conference Proceedings | 14th International Conference on Mechanical Engineering (ICME 2023) | 2024 | Dr. Istiaq Jamil Siddique | Paper Link |
| Numerical Simulation of Microwave Heating of Cylindrical Shaped Biomass Material | Conference Proceedings | 14th International Conference on Mechanical Engineering (ICME 2023) | 2024 | Dr. Istiaq Jamil Siddique | Paper Link |
| Developments in sensor materials, technologies and applications | Book | Reference Module in Materials Science and Materials Engineering | 2024 | Mr. Md. Araf Hossan | Paper Link |
| A novel pin finned structure-embedded microchannel heat sink: CFD-data driven MLP, MLR, and XGBR machine learning models for thermal and fluid flow prediction | Journal Article | Energy | 2024 | Mr. Nabil Mohammad Chowdhury | Paper Link |
| A novel case of honeycomb shaped pin fin heat sink: CFD-data driven machine learning models for thermal performance prediction | Journal Article | Case Studies in Thermal Engineering | 2024 | Mr. Nabil Mohammad Chowdhury | Paper Link |
| Solar thermal adsorption cooling system in Bangladesh: INSEL simulation and economic analysis | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE) | 2023 | Dr. Mahbubul Muttakin | |
| Numerical investigation of the hydrothermal performance of novel pin-fin heat sinks with hyperbolic, wavy, and crinkle geometries and various perforations | Journal Article | International Journal of Thermal Sciences | 2023 | Dr. Mohammad Rejaul Haque | |
| Numerical Investigation of the Enhancement of the Aerodynamic Performance for Newly Modified Blended Airfoils Utilizing S809, S829, and NACA 2412 Baseline Shapes | Journal Article | Arabian Journal for Science and Engineering | 2023 | Dr. Mohammad Rejaul Haque | |
| Effect of fibre orientation and stacking sequence on properties of hybrid composites | Journal Article | Materials Science and Technology | 2023 | Dr. Mohammad Rejaul Haque | |
| Numerical investigation of the thermal performance optimization inside a heat exchanger tube using different novel combination of perforations on Y-shaped insert | Journal Article | International Journal of Thermal Sciences | 2023 | Dr. Mohammad Rejaul Haque | |
| Mechanical characterization of banana-nylon fibre reinforced Vinyl ester composites | Journal Article | Advances in Materials and Processing Technologies | 2023 | Dr. Mohammad Rejaul Haque | |
| Numerical Investigation of MHD Mixed Convection Phenomenon in a Lid-Driven Hexagonal Enclosure with Wavy Wall and SWCNT-MWCNT Nanofluids | Journal Article | Arabian Journal for Science and Engineering | 2023 | Dr. Mohammad Rejaul Haque | |
| Quantification of Electrostatic and Adhesive Forces Between Microwire and Microprobe Using Experimental and Numerical Approaches | Journal Article | Arabian Journal for Science and Engineering | 2023 | Dr. Fazlar Rahman | Paper Link |
| Measurement and Controlling Friction Force in a Sliding Microwire by Size and Boundary Condition Variation | Conference Proceedings | International Conference on Mechanical Engineering (ICME 2023), BUET, Paper ID 311 | 2023 | Dr. Fazlar Rahman | |
| Effect of Human Hair on Mechanical Properties of Jute and BNH Fiber Reinforced Hybrid Polyester Composites | Journal Article | Journal of Natural Fibers | 2023 | Dr. Fazlar Rahman | Paper Link |
| Experimental and Numerical Study of Conical Shaped Pin Finned Heat Sink with PCM Material | Conference Proceedings | International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE) 2023 | 2023 | Dr. Fazlar Rahman | |
| Suppression of wetting transition on evaporative fakir droplets by using slippery superhydrophobic surfaces with low depinning force. | Journal Article | Scientific Reports | 2023 | Dr. Anjan Goswami | Paper Link |
| Central sheet formation from simultaneous impacts of two droplets on a dry substrate | Conference Proceedings | 11th International Conference on Multiphase Flow, Kobe, Japan | 2023 | Dr. Anjan Goswami | |
| Simultaneous impact of droplet pairs on solid surfaces | Journal Article | Journal of Fluid Mechanics | 2023 | Dr. Anjan Goswami | Paper Link |
| Reduction of Total Drag for Finite Cylinders in Turbulent Flow with a Half-C Shape Upstream Body | Journal Article | International Journal of Fluid Mechanics Research | 2023 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| DESIGN AND DEVELOPMENT OF A GPS-BASED HOVER QUADCOPTER USING THE STM-32 MICROCONTROLLER | Conference Proceedings | 17th Annual Paper Meet-2022, Jan 2023, IEB, Bangladesh | 2023 | Dr. Mohammad Harun-Or-Rashid | |
| Design and Development of a Battery Powered Motor Driven Rice Transplanting Machine | Conference Proceedings | 17th Annual Paper Meet-2022, Jan 2023, IEB, Bangladesh | 2023 | Dr. Mohammad Harun-Or-Rashid | |
| Design and Development of a Stair Climbing Four-Wheeled Robot | Conference Proceedings | 17th Annual Paper Meet-2022, Jan 2023, IEB, Bangladesh | 2023 | Dr. Mohammad Harun-Or-Rashid | |
| Unveiling the microstructure of LES manufactured parts for sustainable productive business | Journal Article | Journal of Alloys and Metallurgical Systems | 2023 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Review of Intelligence for Additive and Subtractive Manufacturing: Current Status and Future Prospects | Journal Article | Micromachines | 2023 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| EVALUATION OF MECHANICAL PROPERTIES OF KENAF-WOVEN KEVLAR & JUTE-WOVEN KEVLAR REINFORCED HYBRID COMPOSITES WITH DIFFERENT WEIGHT FRACTIONS AND PLY SEQUENCES | Conference Proceedings | 7 th International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE2023) | 2023 | Dr. Md. Shahnewaz Bhuiyan | |
| EXPERIMENTAL INVESTIGATION ON THE PERFORMANCES OF DIFFERENT PAD MATERIALS USED IN A SUSTAINABLE ECO-FRIENDLY REFRIGERATOR | Journal Article | Journal of Mechanical Engineering, The Institute of Engineers, Bangladesh | 2023 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Modeling approaches for bio-based composites | Book | Materials Science and Materials Engineering | 2023 | Mr. Yeadul Islam Sazal | Paper Link |
| Fabrication and analysis of Biomass pallets from rice husk and wood | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy 2023 | 2023 | Mr. Yeadul Islam Sazal | |
| Recent advances in applications of hybrid composites | Book | Materials Science and Materials Engineering | 2023 | Mr. Yeadul Islam Sazal | Paper Link |
| A novel approach to optimize material distributions of rotating functionally graded circular disk under minimum and prescribed stresses | Journal Article | Materials Today Communications | 2023 | Mr. Sazedur Rahman | Paper Link |
| Modeling approaches for bio-based composites | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Annual Plant Reinforced Biocomposite Fiberboards—Investigation on Mechanical Properties | Book | Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives: Processing, Properties and Applications | 2023 | Mr. Sazedur Rahman | Paper Link |
| Overview of Bioceramics | Book | Advanced Bioceramics | 2023 | Mr. Sazedur Rahman | Paper Link |
| Biobased composites reinforced with annual plants—Design, manufacturing techniques, and parameters influencing the overall properties | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Recent advances in applications of hybrid composites | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Biobased composites for advanced applications: Possibilities and difficulties on the path to circularity | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Fabrication and analysis of biomass pellets from rice husk and wood | Conference Proceedings | The 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2023) | 2023 | Mr. Sazedur Rahman | |
| Recent developments in functional plant fiber-based composites and their engineering applications | Book | Reference Module in Materials Science and Materials Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Processing of Bioceramics by Extrusion and Slip Casting | Book | Advanced Bioceramics | 2023 | Mr. Sazedur Rahman | Paper Link |
| Design, fabrication, and characterization of 3D-printed ABS and PLA scaffolds potentially for tissue engineering | Journal Article | Results in Engineering | 2023 | Mr. Sazedur Rahman | Paper Link |
| Biobased composites reinforced with annual plants—Design, manufacturing techniques, and parameters influencing the overall properties | Book | Materials Science and Materials Engineering | 2023 | Mr. Mohammad Joynal Abedin | Paper Link |
| Recent advances in applications of hybrid composites | Book | Materials Science and Materials Engineering | 2023 | Mr. Mohammad Joynal Abedin | Paper Link |
| An Assessment of Solar Micro-Grid System in the Islands of Bangladesh: A Techno-Economic Analysis for Sustainable Energy Access | Conference Proceedings | International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE) | 2023 | Mr. Mohammad Joynal Abedin | |
| Study of Agricultural Waste Gasification to Meet the Energy Demand | Conference Proceedings | International Conference on Mechanical, Materials and Production Engineering (IUT-ICMMPE) | 2023 | Mr. Mohammad Joynal Abedin | |
| Engineered cementitious composites: Design, structural and 3D printing applications | Book | Materials Science and Materials Engineering | 2023 | Mr. Mohammad Joynal Abedin | Paper Link |
| Fabrication and Analysis of Biomass Pellets from Rice husk and Wood. | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy. | 2023 | Mr. Mohammad Joynal Abedin | |
| Fabrication and Analysis of Biomass Pellets from Rice Husk and Wood | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2023) | 2023 | Dr. Abu Hamja | |
| Evaluation of Mechanical Properties of Kenaf-Woven Kevlar & Jute-Woven Kevlar Reinforced Hybrid Composites with Different Weight Fractions and Ply Sequences | Conference Proceedings | 7th International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2023) | 2023 | Dr. Abu Hamja | |
| Reduction of changeover time through SMED with RACI integration in garment factories | Journal Article | International Journal of Lean Six Sigma | 2023 | Dr. Abu Hamja | Paper Link |
| Recycling of Plastic Polymer: Reinforcement of Building Material Using Polymer Plastics of Used COVID-19 Syringes | Journal Article | Buildings | 2023 | Dr. Abu Hamja | Paper Link |
| Flexural behaviors of sandwich panels with AR-glass textile-reinforced concrete under the low-velocity impact | Journal Article | Journal of Building Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| A critical review of developments in the characterization of metal matrix composites with particulate reinforcements | Book | In Book: Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Modeling approaches for bio-based composites | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Improving corrosion resistance of BFRP bars by coating CNTs modified resin in simulated pore solution of seawater sea sand concrete | Journal Article | Construction and Building Materials | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Effects of volume fractions and surface coating of textile yarns on the tensile performance of AR-glass textile reinforced concrete | Journal Article | Journal of Building Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Characterization and Comparative Evaluation of Structural, Chemical, Thermal, Mechanical, and Morphological Properties of Plant Fibers | Book | In Book: Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Advances in biocomposite fabrication: Emerging technologies and their potential applications | Book | In Book: Reference Module in Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| A comparative study of bare and seawater sea sand concrete wrapped basalt fiber-reinforced polymer bars exposed to laboratory and real marine environments | Journal Article | Journal of Construction and Building Materials | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Durability of BFRP bars embedded in seawater sea sand coral aggregate concrete in simulated seawater environment: Effects of coral coarse aggregate and cement contents | Journal Article | Journal of Construction and Building Materials | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Engineered cementitious composites: Design, structural and 3D printing applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Advanced biopolymers for automobile and aviation engineering applications | Journal Article | Journal of Polymer Research | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Damping under Varying Frequencies, Mechanical Properties, and Failure Modes of Flax/Polypropylene Composites | Journal Article | Journal of Polymers | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Eco-friendly green approach of nickel oxide nanoparticles for biomedical applications | Journal Article | Journal of Open Chemistry | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Composite materials from synthetic and natural sources: Fabrication techniques and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| A critical review of developments in characterizations of polymer matrix composites with particulate reinforcements | Book | In book: Comprehensive Materials Processing, Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Ceramic matrix composites with particulate reinforcements—Progress over the past 15 years | Book | In Book: Materials Science and Materials Engineering | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Plastic waste to plastic value: Role of industrial biotechnology | Book | In Book: Biodegradability of Conventional Plastics | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Recent advances in sustainable building materials for the construction industry: Mechanical performance and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Recent advances in applications of hybrid composites | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Nanoparticles, nanocomposites, green/eco-composites, and hybrid composites and their applications in energy sectors | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Advances in bioactive nanoparticles for wound healing, tissue engineering and drug delivery | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Recent advancements in polymer matrix nanocomposites for bone tissue engineering applications | Journal Article | Journal of Drug Delivery Science and Technology | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Properties Prediction of Composites Based on Machine Learning Models: A Focus on Statistical Index Approaches | Journal Article | Materials Today Communications | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Sensor to Electronics Applications of Graphene Oxide through AZO Grafting | Journal Article | Journal of Nanomaterials | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Biobased composites reinforced with annual plants—Design, manufacturing techniques, and parameters influencing the overall properties | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| A review on eco-friendly basalt fibers, their composites and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Biobased composites for advanced applications: Possibilities and difficulties on the path to circularity | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Advances in ceramic composites: Manufacture, performances, and applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Additive manufacturing techniques, their challenges, and additively manufactured composites for advanced engineering applications | Book | In book: Comprehensive Materials Processing, 2e | 2023 | Dr. Md Zillur Rahman | Paper Link |
| Recent advances in applications of hybrid composites | Book | 2023 | Ms. Zaimaa Salsabil | ||
| Recent developments in functional plant fiber-based composites and their engineering applications | Book | 2023 | Ms. Zaimaa Salsabil | ||
| Advances in the performance of engineered cementitious composites under extreme conditions | Book | 2023 | Ms. Zaimaa Salsabil | ||
| Phase change material-based rooftop on public transport for thermal management | Journal Article | Energy Storage and Saving | 2023 | Mr. Md. Araf Hossan | Paper Link |
| Overview of Bioceramics | Book | Advanced Bioceramics | 2023 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Annual Plant Reinforced Biocomposite Fiberboards—Investigation on Mechanical Properties | Book | Annual Plant: Sources of Fibres, Nanocellulose and Cellulosic Derivatives: Processing, Properties and Applications | 2023 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Processing of Bioceramics by Extrusion and Slip Casting | Book | Advanced Bioceramics | 2023 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Towards the Development of Compact and High Efficiency Adsorption Heat Pumps | Book | Rapid Refrigeration and Water Protection: Next Generation Adsorbents | 2022 | Dr. Mahbubul Muttakin | Paper Link |
| Mechanical and dynamic characteristics of double and single beam cantilevers for MEMS manipulation | Journal Article | Journal of Mechanical Science and Technology | 2022 | Dr. Fazlar Rahman | Paper Link |
| Influence of alkalisation and eggshell particles on mechanical, thermal and physical properties of rattan-bamboo fibre reinforced hybrid polyester laminated composite | Journal Article | ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES | 2022 | Dr. Fazlar Rahman | Paper Link |
| Investigation of fluid flow and heat transfer for an optimized lid driven cavity shape under the condition of inclined magnetic field | Journal Article | Energy and Thermofluids Engineering | 2022 | Dr. Fazlar Rahman | Paper Link |
| Numerical Analysis of Modified NACA 4412 Airfoil for Implementation of Low Reynolds Number VAWTs | Journal Article | Journal of Mechanical Engineering | 2022 | Dr. Fazlar Rahman | |
| Wetting transition of evaporating fakir drop on microstructured superhydrophobic surfaces: model development and validation in Surface Evolver. | Conference Proceedings | HEFAT-ATE | 2022 | Dr. Anjan Goswami | Paper Link |
| Characteristics of multiple droplet impacts on solid surfaces. | Conference Proceedings | ILASS Europe | 2022 | Dr. Anjan Goswami | |
| Simultaneous impact of two droplets on a solid Surface: central sheet evolution and splashing | Others | Bulletin of the American Physical Society | 2022 | Dr. Anjan Goswami | Paper Link |
| Air curtain in informal shopping malls: Optimization of the air curtain operating parameters for heat and smoke confinement | Journal Article | Energy and Buildings | 2022 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Solar thermal energy conversion | Book | 2022 | Mr. Mohsan Uddin Ahmad | ||
| Numerical investigation of wave impact characteristics on a vertical wall for the oscillating piston-type wave generator | Journal Article | International Journal of Energy and Water Resources | 2022 | Mr. Badhan Saha | Paper Link |
| Microstructural study of SME manufactured marine propeller, | Conference Proceedings | 7th International Conference on Mechanical, Industrial, and Energy Engineering, 22-24 Dec | 2022 | Dr. Md. Shahnewaz Bhuiyan | |
| Mechanical Characterization of Jute-Glass fiber reinforced composite: Effect of UV-C radiation on hybrid composites | Journal Article | Journal of Mechanical Engineering | 2022 | Dr. Md. Shahnewaz Bhuiyan | |
| Polymer nanocomposites for automotive applications | Book | Advanced Polymer Nanocomposites | 2022 | Mr. Sazedur Rahman | Paper Link |
| Novel Design and Construction of an Open Circuit Subsonic Wind Tunnel with Performance Test | Journal Article | Recent Trends in Production Engineering | 2022 | Mr. Sazedur Rahman | Paper Link |
| Effects of Asymmetric Channel on the Convective Heat Transfer: A Computational Study | Journal Article | Energy and Thermofluids Engineering | 2022 | Dr. Abu Hamja | Paper Link |
| Structural and mechanical properties of bamboo fiber bundle and fiber/bundle reinforced composites: A review | Journal Article | Journal of Materials Research and Technology | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Numerical investigation of heat transfer performance for rectangular, elliptical, and airfoil shaped pin fin heatsinks through the novel combination of perforation and bulge inserts | Journal Article | International Communications in Heat and Mass Transfer | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Experimental and numerical study on a new floor heating system using carbon fiber tape embedded in cement mortar | Journal Article | Journal of Building Engineering | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Tensile properties deterioration of BFRP bars in simulated pore solution and real seawater sea sand concrete environment with varying alkalinities | Journal Article | Composites Part B: Engineering | 2022 | Dr. Md Zillur Rahman | Paper Link |
| A state-of-the-art review on mechanical performance characterization and modelling of high-performance textile reinforced concretes | Journal Article | Construction and Building Materials | 2022 | Dr. Md Zillur Rahman | Paper Link |
| A review on mechanical properties and deterioration mechanisms of FRP bars under severe environmental and loading conditions | Journal Article | Cement and Concrete Composites | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Face Masks to Combat Coronavirus (COVID-19)—Processing, Roles, Requirements, Efficacy, Risk and Sustainability | Journal Article | Journal of Polymers | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Solar drying system | Book | In Book: Technologies for Solar Thermal Energy: Theory, Design and Optimization | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Influences of surface treatment on the mechanical performances of carbon and basalt textiles-reinforced concretes under harsh environments | Journal Article | Composites Part B: Engineering | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Static and dynamic tensile behaviors of BFRP bars embedded in seawater sea sand concrete under marine environment | Journal Article | Composites Part B: Engineering | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Mitigating the deterioration of BFRP bars in seawater sea sand mortar by reducing alkalinity | Journal Article | Journal of Construction and Building Materials | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Aging Effects on Mechanical Properties of Biocomposites with Recycled Polymers | Book | In Book: Aging Effects on Natural Fiber-reinforced Polymer Composites: Durability and Life Prediction | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Influence of Fiber Treatment on the Damping Performance of Plant Fiber Composites | Book | In Book: Vibration and Damping Behavior of Biocomposites | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Influence of Moisture Absorption on Physico-Chemical Properties of Natural Fiber-based Hybrid Composites | Book | In Book: Aging Effects on Natural Fiber-Reinforced Polymer Composites: Durability and Life Prediction | 2022 | Dr. Md Zillur Rahman | Paper Link |
| Technical challenges in scaling up the microwave technology for biomass processing | Journal Article | Renewable and Sustainable Energy Reviews | 2022 | Dr. Istiaq Jamil Siddique | Paper Link |
| Unraveling the metallic thermocouple effects during microwave heating of biomass | Journal Article | Energy | 2022 | Dr. Istiaq Jamil Siddique | Paper Link |
| Numerical Approach in Determination of Thermophysical Material Properties in Decomposition of Lumpy Dolomite Particles | Conference Proceedings | International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT'22) | 2022 | Mr. Md. Ishtiaque Hossain | Paper Link |
| Polymer nanocomposites for automotive applications | Book | Advanced Polymer Nanocomposites | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| CO2 Conversion to Chemicals and Fuel Cells Using Renewable Energy Sources | Book | 2D Nanomaterials for CO2 Conversion into Chemicals and Fuels | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Free vibration and damping properties of the pineapple leaf fiber-and sisal fiber-based polymer composites | Book | Vibration and Damping Behavior of Biocomposites | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Effect of corrugated pipe on laminar convective heat transfer by using SWCNT nanofluid: a numerical study | Journal Article | Latin American Applied Research-An international journal | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| Synthesis of Two-dimensional Hybrid Materials, Unique Properties, and Challenges | Book | 2D Nanomaterials for CO2 Conversion into Chemicals and Fuels | 2022 | Mr. Muhammad Ifaz Shahriar Chowdhury | |
| A critical overview of adsorption kinetics for cooling and refrigeration systems | Journal Article | Advances in Colloid and Interface Science | 2021 | Dr. Mahbubul Muttakin | Paper Link |
| Study on optimized adsorption chiller employing various heat and mass recovery schemes | Journal Article | International Journal of Refrigeration | 2021 | Dr. Mahbubul Muttakin | Paper Link |
| Minimizing Surface Driving and Disturbance Forces in MEMS's Microstructure-A Review | Journal Article | Annals of Engineering | 2021 | Dr. Fazlar Rahman | |
| Numerical Analysis of Reaction Forces at the Supports of Sliding Microwire | Journal Article | Journal of Mechanical Engineering and Sciences | 2021 | Dr. Fazlar Rahman | Paper Link |
| Turbulent heat transfer enhancement in tubular heat exchangers with different twisted tape inserts | Journal Article | Journal of Mechanical Engineering and Sciences | 2021 | Mr. Md. Jubayer Hossain | Paper Link |
| Design Optimization of Supercritical Carbon Dioxide (s-CO2) Cycles for Waste Heat Recovery From Marine Engines | Journal Article | Journal of Energy Resources Technology | 2021 | Mr. Md. Jubayer Hossain | Paper Link |
| Enhancement of Pool Boiling Heat Transfer over Plain and Rough Cylindrical Tubes | Journal Article | International Journal of Heat and Technology | 2021 | Mr. Md. Jubayer Hossain | Paper Link |
| EFFECT OF FIBER LOADING AND ORIENTATION ON MECHANICAL AND THERMAL PROPERTIES OF JUTE-POLYESTER LAMINATED COMPOSITE | Journal Article | Journal of Natural Fibers, Taylor & Francis | 2021 | Mr. Md. Merajul Haque | |
| AN EXPERIMENTAL STUDY OF PHYSICAL, MECHANICAL, AND THERMAL PROPERTIES OF RATTAN-BAMBOO FIBER REINFORCED HYBRID POLYESTER LAMINATED COMPOSITE | Journal Article | Journal of Natural Fibers, Taylor & Francis | 2021 | Mr. Md. Merajul Haque | |
| Enhancement of pool boiling heat transfer over plain and rough cylindrical tubes. | Journal Article | International Journal of Heat and Technology | 2021 | Dr. Anjan Goswami | Paper Link |
| Simultaneous impact of multiple droplets on a solid surface. | Conference Proceedings | Micro and Nano Flows | 2021 | Dr. Anjan Goswami | |
| Turbulent heat transfer enhancement in tubular heat exchangers with different twisted tape inserts. | Journal Article | Journal of Mechanical Engineering and Sciences | 2021 | Dr. Anjan Goswami | Paper Link |
| Effect of an Upstream Extended Surface on Reduction of Total Drag for Finite Cylinders in Turbulent Flow | Journal Article | International Journal of Fluid Mechanics Research | 2021 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Improvement of heat and smoke confinement using air curtains in informal shopping malls | Journal Article | Journal of Building Engineering | 2021 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Turbulent Heat Transfer Enhancement in Tubular Heat Exchangers with Different Twisted Tape Inserts | Journal Article | Journal of Mechanical Engineering and Sciences | 2021 | Mr. Sadman Hassan Labib | Paper Link |
| Enhancement of Pool Boiling Heat Transfer over Plain and Rough Cylindrical Tubes | Journal Article | International Journal of Heat and Technology | 2021 | Mr. Sadman Hassan Labib | Paper Link |
| Computational and Experimental Study of Frequency Dependent Impedance Response of Epoxy-Tin Composite | Journal Article | IOSR Journal of Mechanical and Civil Engineering | 2021 | Mr. Sadman Hassan Labib | Paper Link |
| Performance Analysis of a Low Head Water Vortex Turbine | Journal Article | MIST International Journal of Science and Technology | 2021 | Mr. Badhan Saha | Paper Link |
| Optimization of Thermal Performance of a Segmental Baffle Shell and Tube Heat Exchanger under Different Baffle Spaces and Baffle Numbers: A Numerical Case Study Using CFD | Journal Article | Journal of Advanced Research in Industrial Engineering | 2021 | Mr. Badhan Saha | Paper Link |
| Impact of Baffle Spaces and Baffle Numbers on Pressure Drop and Heat Transfer in a Shell and Tube Heat Exchanger: A CFD Analysis | Journal Article | Advancement in Mechanical Engineering and Technology | 2021 | Mr. Badhan Saha | Paper Link |
| Microstuctural study of LES manufactured part for understanding the predictive capabilities under service load | Journal Article | Journal of Mechanical Engineering | 2021 | Dr. Md. Shahnewaz Bhuiyan | |
| Microstructural Evaluation of Local LES Manufactured Piston | Others | 4th International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), December 26-27, 2021, Dhaka, Bangladesh | 2021 | Dr. Md. Shahnewaz Bhuiyan | |
| An Intelligent Cyber-Physical System of Machining Operation for Industry 4.0 | Others | 4th International Conference on Industrial and Mechanical Engineering and Operations Management (IMEOM), December 26-27, 2021, Dhaka, Bangladesh | 2021 | Dr. Md. Shahnewaz Bhuiyan | |
| Comparison of local SME manufactured Al-ally automotive piston in Bangladesh with imported counterparts by microstructural and chemical characterization | Journal Article | IOSR Journal of Mechanical and Civil Engineering (ISOR-JMCE) | 2021 | Dr. Md. Shahnewaz Bhuiyan | |
| Tensile Behavior of Geometrically Irregular Bagasse Fiber | Journal Article | Applied Mechanics | 2021 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Influence of Feed Rate Response (FRR) on Chip Formation in Micro and Macro Machining of Al Alloy | Journal Article | Metals- | 2021 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Optimization of Thermal Performance of a Segmental Baffle Shell and Tube Heat Exchanger under Different Baffle Spaces and Baffle Numbers: A Numerical Case Study Using CFD | Journal Article | Journal of Advanced Research in Industrial Engineering | 2021 | Mr. Md. Tofazzal Hossain | Paper Link |
| Impact of Baffle Spaces and Baffle Numbers on Pressure Drop and Heat Transfer in a Shell and Tube Heat Exchanger: A CFD Analysis | Journal Article | Advancement in Mechanical Engineering and Technology | 2021 | Mr. Md. Tofazzal Hossain | Paper Link |
| Numerical Analysis of Flow and Heat Transfer Characteristics between Two Parallel Plates with Constriction(s) | Journal Article | Computational Engineering and Physical Modeling | 2021 | Mr. Sazedur Rahman | Paper Link |
| Complementarities between Operations and Occupational Health and Safety in Garments | Journal Article | Sustainability | 2021 | Dr. Abu Hamja | Paper Link |
| Transfer mechanisms for lean implementation with OHS integration in the garment industry | Journal Article | International Journal of Productivity and Performance Management | 2021 | Dr. Abu Hamja | Paper Link |
| A review on the tensile behavior of fiber-reinforced polymer composites under varying strain rates and temperatures | Journal Article | Journal of Construction and Building Materials | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Mechanical and damping performances of flax fibre composites – A review | Journal Article | Journal of Composites Part C: Open Access | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Effect of alkalinity on the shear performance degradation of basalt fiber-reinforced polymer bars in simulated seawater sea sand concrete environment | Journal Article | Journal of Construction and Building Materials | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Transverse low-velocity impact performance of BFRP bars after exposure to the saline-alkaline environment | Journal Article | Journal of Construction and Building Materials | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Preparation of nano-xylan and its influences on the anti-fungi performance of straw fiber/HDPE composite | Journal Article | Journal of Industrial Crops and Products | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Structural and mechanical properties of fish scales for the bio-inspired design of flexible body armors: A review | Journal Article | Journal of Acta Biomaterialia | 2021 | Dr. Md Zillur Rahman | Paper Link |
| Computational fluid dynamics modelling of the visible light photocatalytic oxidation process of toluene for indoor building materials with locally doped titanium dioxide | Journal Article | Indoor and Built Environment | 2020 | Dr. Mahbubul Muttakin | Paper Link |
| Effect of Fiber Loading and Orientation on Mechanical and Thermal Properties of Jute-Polyester Laminated Composite | Journal Article | Journal of Natural Fiber, Taylor & Francis | 2020 | Dr. Fazlar Rahman | Paper Link |
| Physico-mechanical properties investigation of sponge-gourd and betel nut reinforced hybrid polyester composites | Journal Article | Advances in Materials and Processing Technologies, Taylor & Francis | 2020 | Dr. Fazlar Rahman | Paper Link |
| Experimental Study of Physical, Mechanical and Thermal Properties of Rattan-Bamboo Fiber Reinforced Hybrid Polyester Laminated Composite | Journal Article | Journal of Natural Fiber, Taylor & Francis | 2020 | Dr. Fazlar Rahman | Paper Link |
| Optimization of sewing line production rate and cost using Taguchi signal-to-noise method | Journal Article | Journal of Production Systems and Manufacturing Science | 2020 | Mr. Md. Jubayer Hossain | Paper Link |
| Investigation for the drag reduction by introducing a passage through a circular cylinder | Journal Article | Annals of Engineering | 2020 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Effect of Fuel Orientation on the Performance of Air Curtains in Confining Fire and Smoke Propagation in Informal Shopping Malls | Conference Proceedings | International Exchange and Innovation Conference on Engineering & Sciences (IEICES) | 2020 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Damage micromechanisms in high Mn and Zn content 7XXX aluminum alloys | Journal Article | Materials Science and Engineering: A | 2020 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Tensile Strength Study of Stainless-Steel using Weibull Distribution | Journal Article | MIST International Journal of Science and Technology | 2020 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Rapid pre-concentration of Escherichia coli in a microfluidic paper-based device using ion concentration polarization | Journal Article | Electrophoresis | 2020 | Mr. Syed Shaheer Uddin Ahmed | |
| An Electroporation Device with Microbead-Enhanced Electric Field for Bacterial Inactivation | Journal Article | Inventions | 2020 | Mr. Syed Shaheer Uddin Ahmed | |
| Performance Comparison of Nanofluids In Laminar Convective Flow Region Through a Channel | Conference Proceedings | International Conference on Advances in Materials and Manufacturing Engineering (ICAMME 2019) | 2020 | Mr. Sazedur Rahman | Paper Link |
| Energy storage technologies | Book | In Book: Energy for Sustainable Development: Demand, Supply, Conversion and Management | 2020 | Dr. Md Zillur Rahman | Paper Link |
| A comprehensive study to evaluate absolute uptake of carbon dioxide adsorption onto composite adsorbent | Journal Article | International Journal of Refrigeration | 2019 | Dr. Mahbubul Muttakin | Paper Link |
| A Statistical Approach Employing Bootstrap Sample to Determine Optimum Models for IUPAC Type-I and Type-V Isotherms | Conference Proceedings | Proceedings of the 5th International Conference on Polygeneration (ICP) | 2019 | Dr. Mahbubul Muttakin | |
| Experimental study on the effect of adsorbent height on adsorption dynamics | Conference Proceedings | International Meeting on Advances in Thermofluids (IMAT) | 2019 | Dr. Mahbubul Muttakin | Paper Link |
| Solar Thermal-Powered Adsorption Chiller | Book | Tyagi H., Chakraborty P., Powar S., Agarwal A. (eds) Solar Energy. Energy, Environment, and Sustainability | 2019 | Dr. Mahbubul Muttakin | Paper Link |
| A Statistical Approach to Determine Optimal Models for IUPAC-Classified Adsorption Isotherms | Journal Article | Energies | 2019 | Dr. Mahbubul Muttakin | Paper Link |
| Study of an adsorption chiller that incorporates mass and heat recovery schemes | Conference Proceedings | International Conference on Polygeneration (ICP) | 2019 | Dr. Mahbubul Muttakin | |
| Harvesting of electrical energy from wasted heat from common household stoves using thermoelectric generators (TEGs) | Conference Proceedings | 8TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING | 2019 | Dr. Md. Kharshiduzzaman | Paper Link |
| Determination of the thermal conductivity of poor conductive materials in the form of disc by self-constructed Lee’s disc apparatus | Conference Proceedings | 8TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING | 2019 | Dr. Md. Kharshiduzzaman | Paper Link |
| Experimental analysis of the response of fiber Bragg grating sensors under non-uniform strain field in a twill woven composite | Journal Article | Journal of Composite Materials | 2019 | Dr. Md. Kharshiduzzaman | Paper Link |
| Waste heat of a brick kiln – an opportunity of power generation | Journal Article | Journal of Alternative and Renewable Energy Sources | 2019 | Dr. Dewan Hasan Ahmed | |
| A Conceptual Design of Energy Harvest from Roadside Trees of a Highway | Journal Article | European Journal of Sustainable Development Research | 2019 | Dr. Dewan Hasan Ahmed | |
| TiO2 and zeolite nanopowder enhanced mechanical properties of hybrid polymer composites | Journal Article | Journal of Thermoplastic Composite Materials | 2019 | Mr. Md. Merajul Haque | Paper Link |
| Numerical study of wetting stability and sliding behavior of liquid droplets on microgrooved surfaces. | Journal Article | Colloid and Polymer Science | 2019 | Dr. Anjan Goswami | Paper Link |
| Effectiveness of Air Curtains as Thermal and Smoke Barrier Against High Gradients of Flow Parameters | Conference Proceedings | 5th World Congress on Mechanical, Chemical, and Material Engineering (MCM’19) | 2019 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Spread and Propagation of Generic Shopping Mall Fire of Bangladesh Under Different Scenarios | Conference Proceedings | International Conference on Disaster Risk Management | 2019 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Replacement of present conventional condenser of household refrigerator by louver fin micro channel condenser | Journal Article | Arabian Journal for Science and Engineering | 2019 | Dr. Mohammad Harun-Or-Rashid | Paper Link |
| Seesaw Dynamics and Control- Experimental Study, journal of Mechanical Robotics | Journal Article | Journal of Mechanical Robotics | 2019 | Dr. Mohammad Harun-Or-Rashid | |
| Fabrication and Study of an Unmanned Under Water Vehicle | Journal Article | IOSR Journal of Mechanical and Civil Engineering | 2019 | Dr. Mohammad Harun-Or-Rashid | |
| Study the Leg Mechanism of a Four Legged Field Robot | Journal Article | Journal of Mechanical Robotics | 2019 | Dr. Mohammad Harun-Or-Rashid | Paper Link |
| CFD ANALYSIS AROUND AHMED BODY USING A LAMINAR KINETIC ENERGY BASED TRANSITION AND TURBULENCE MODEL | Conference Proceedings | Topical Problems of Fluid Mechanics 2019 | 2019 | Prof. Dr. Mazharul Islam | Paper Link |
| Waste heat of a brick kiln – an opportunity of power generation | Journal Article | Journal of Alternative and Renewable Energy Sources | 2019 | Mr. Sadman Hassan Labib | Paper Link |
| Comparison of linear displacement measurement between a MEMS accelerometer and HC-SR04 low cost ultrasonic sensor | Conference Proceedings | 1st International Conference on Advances in Science, Engineering and Robotics Technology | 2019 | Mr. Mohsan Uddin Ahmad | |
| A CFD investigation of conventional brick kilns | Conference Proceedings | 8th BSME International Conference on Thermal Engineering | 2019 | Mr. Mohsan Uddin Ahmad | Paper Link |
| Assessing the effects of lean on occupational health and safety in the Ready-Made Garment industry | Journal Article | Work | 2019 | Dr. Abu Hamja | Paper Link |
| Removing bottlenecks in the sewing line – possible consequences for workers’ health, in: International Scientific Conference on Sustainability of Global Garment Industry | Conference Proceedings | International Scientific Conference: Sustainability of Global Garment Industry | 2019 | Dr. Abu Hamja | |
| The effect of lean on occupational health and safety and productivity in the garment industry–a literature review | Journal Article | Production & Manufacturing Research | 2019 | Dr. Abu Hamja | Paper Link |
| Single Minute Exchange of Dies (SMED) practice in readymade garments factories in Bangladesh- Issues and challenges | Conference Proceedings | International Conference on Engineering Research and Education School of Applied sciences & Technology | 2019 | Dr. Abu Hamja | |
| Assessment of Productivity and Ergonomic Conditions at the Production Floor: An Investigation into the Bangladesh Readymade Garments Industry | Book | International Ergonomics Association 20th congress | 2019 | Dr. Abu Hamja | Paper Link |
| Transfer mechanisms of lean implementation in the apparel industry in Bangladesh | Conference Proceedings | International Student Congress- New Technologies in Engineering | 2019 | Dr. Abu Hamja | |
| A Numerical Model to Simulate the Impact Response of Flax-PP Composites | Conference Proceedings | Proceedings of the 22nd International Conference on Composite Materials | 2019 | Dr. Md Zillur Rahman | |
| Study on the influence of adsorbent particle size and heat exchanger aspect ratio on dynamic adsorption characteristics | Journal Article | Applied Thermal Engineering | 2018 | Dr. Mahbubul Muttakin | Paper Link |
| Experimental study of CO\_2 adsorption kinetics onto activated carbon | Conference Proceedings | International Exchange and Innovation Conference on Engineering & Sciences (IEICES 2018) | 2018 | Dr. Mahbubul Muttakin | Paper Link |
| Theoretical framework to evaluate minimum desorption temperature for IUPAC classified adsorption isotherms | Journal Article | International Journal of Heat and Mass Transfer | 2018 | Dr. Mahbubul Muttakin | Paper Link |
| Effect of thermal ageing on mechanical behavior of synthetic and natural rubber dominated short flat bars | Conference Proceedings | International Conference on Mechanical Engineering | 2018 | Mr. Md. Faysal Khan | Paper Link |
| Prediction and optimization of surface roughness in minimum quantity coolant lubrication applied turning of high hardness steel | Journal Article | Measurement | 2018 | Dr. Md. Kharshiduzzaman | Paper Link |
| Stress, Deformation and Failure Analysis of Parabolic Leaf Spring by Finite Element Analysis with Material Optimization | Conference Proceedings | 4th International Conference On "Structure, Processing and Properties of Materials" SPPM 2018,BUET | 2018 | Dr. Fazlar Rahman | Paper Link |
| Numerical Analysis Of Boiler Fabricated From Ship Breaking Yard Steel Plate And Minimizing Workplace Casualties In Bangladesh | Journal Article | American Journal of Mechanical Engineering | 2018 | Dr. Fazlar Rahman | Paper Link |
| Effect of Heat Transfer Through Wall On Response Of Pneumatic System | Journal Article | Arabian Journal of Science and Engineering | 2018 | Dr. Fazlar Rahman | Paper Link |
| Experimental Study of Concentric Staggered Annular Fin with Radial Outlet and Staggered Rectangular Fin with Lateral Outlet | Journal Article | Journal of Mechanical and Mechanics Engineering (MATT Journal) | 2018 | Dr. Fazlar Rahman | |
| Numerical Study of Wing with Winglets for Different Cant Angle | Journal Article | Journal of Mechanical and Mechanics Engineering | 2018 | Dr. Dewan Hasan Ahmed | |
| Effect of cavity shape and heat source/sink orientation on PCM melting | Journal Article | J. Therm. Energy Syst | 2018 | Dr. Dewan Hasan Ahmed | |
| Stress, Deformation and Failure Analysis of Parabolic Leaf Spring by Finite Element Analysis with Material Optimization | Journal Article | IOP Conference Series: Materials Science and Engineering | 2018 | Mr. Md. Jubayer Hossain | Paper Link |
| Drive cycle of heavy vehicles in Dhaka city: A case study | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 2018 | Mr. Md. Jubayer Hossain | |
| Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning | Journal Article | Measurement | 2018 | Mr. Md. Jubayer Hossain | Paper Link |
| Influence of fiber surface treatment on physicomechanical properties of betel nut and glass fiber reinforced hybrid polyethylene composites | Journal Article | Advances in Materials and Processing Technologies | 2018 | Mr. Md. Merajul Haque | Paper Link |
| Stress, Deformation and Failure Analysis of Parabolic Leaf Spring by Finite Element Analysis with Material Optimization | Journal Article | IOP Conference Series: Materials Science and Engineering | 2018 | Mr. Md. Merajul Haque | Paper Link |
| Drive cycle of heavy vehicles in Dhaka city: a case study. | Conference Proceedings | 5th International Conference on Mechanical, Industrial and Energy Engineering | 2018 | Dr. Anjan Goswami | Paper Link |
| Study of heat transfer enhancement in tubular heat exchanger with twisted tape inserts. | Conference Proceedings | 5th International Conference on Mechanical, Industrial and Energy Engineering | 2018 | Dr. Anjan Goswami | Paper Link |
| Multi-objective optimization of chip-tool interaction parameters using Grey-Taguchi method in MQL-assisted turning. | Journal Article | Measurement | 2018 | Dr. Anjan Goswami | Paper Link |
| Morphological Study of Dispersion Phases in Heterogeneous Waste Form Materials for Efficient Nuclear Waste Containment | Others | 2018 | Dr. Fazle Rabbi | ||
| Influence of hydrogen on strain localization and fracture behavior in AlZnMgCu aluminum alloys | Journal Article | Acta Materialia | 2018 | Dr. Md. Shahnewaz Bhuiyan | |
| The Role of Hydrogen on the Local Fracture Toughness Properties of 7XXX Aluminum Alloys | Journal Article | Metallurgical and Materials Transactions A | 2018 | Dr. Md. Shahnewaz Bhuiyan | |
| Numerical simulation of residential building on the basis of natural ventilation | Conference Proceedings | AIP Conference Proceedings | 2018 | Mr. Md. Tofazzal Hossain | Paper Link |
| Numerical Investigation of Laminar Convective Heat Transfer and Friction Factor of a Pipe by Using Al2O3-Water Nanofluid | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 2018 | Mr. Sazedur Rahman | Paper Link |
| Investigating the complementarity between operational and OHS capabilities in the garment industry in Bangladesh | Conference Proceedings | Production and Operations Management Society (POMS) | 2018 | Dr. Abu Hamja | |
| Enabling the creation of synergies between Occupational Health and Safety and Productivity | Conference Proceedings | 5th International EurOMA Sustainable Operations and Supply Chains Forum | 2018 | Dr. Abu Hamja | Paper Link |
| Influence of Damping on the Bending and Twisting Modes of Flax Fibre-reinforced Polypropylene Composite | Journal Article | Journal of Fibers and Polymers | 2018 | Dr. Md Zillur Rahman | Paper Link |
| Performance of combined PTFE hydrophilic and hydrophobic membrane during laundry/detergent wastewater treatment by air gap membrane distillation (AGMD): an experimental study | Journal Article | DESALINATION AND WATER TREATMENT | 2018 | Dr. Istiaq Jamil Siddique | |
| Computational investigation of turbulent flow development in 180 channel with circular cross section | Journal Article | European Journal of Engineering and Technology Research | 2018 | Mr. Md. Ishtiaque Hossain | |
| CFD modelling to study the influence of activation energy and domain size on adsorption dynamics | Conference Proceedings | International Exchange and Innovation Conference on Engineering & Sciences (IEICES) | 2017 | Dr. Mahbubul Muttakin | Paper Link |
| A numerical study on the influence of adsorption heat exchanger geometry on its system performance | Conference Proceedings | International Conference on Polygeneration (ICP) | 2017 | Dr. Mahbubul Muttakin | |
| Investigation of Drag Coefficient at Subcritical and Critical Reynolds Number Region for Circular Cylinder with Helical Grooves | Journal Article | International Journal of Maritime Technology | 2017 | Dr. Dewan Hasan Ahmed | |
| Effect of time-controlled MQL pulsing on surface roughness in hard turning by statistical analysis and artificial neural network | Journal Article | The International Journal of Advanced Manufacturing Technology | 2017 | Dr. Dewan Hasan Ahmed | |
| Investigation of Wave Characteristics with Rotor Type Water Wave Generator | Journal Article | Journal on Today's Ideas-Tomorrow's Technologies | 2017 | Dr. Dewan Hasan Ahmed | |
| Energy Harvest from Water Wave--Bangladesh Prospect | Journal Article | Journal of Thermal Energy Systems | 2017 | Dr. Dewan Hasan Ahmed | |
| Water and thermal management in PEMFCs--influencing parameters and operational conditions: A Review | Journal Article | Journal of Alternative and Renewable Energy Sources | 2017 | Dr. Dewan Hasan Ahmed | |
| Study of Forced Convection Heat Transfer with Single Phase and Mixture Phase Nanofluid Model at Different Reynolds Numbers | Journal Article | International Organization of Scientific Research (IOSR) | 2017 | Mr. Mir Moniruzzaman Mobin | Paper Link |
| Analysis of the energetics and stability of liquid droplets on textured surfaces with square micropillars. | Conference Proceedings | HEFAT | 2017 | Dr. Anjan Goswami | Paper Link |
| Numerical study of energetics and wetting stability of liquid droplets on microtextured surfaces. | Journal Article | Colloid and Polymer Science | 2017 | Dr. Anjan Goswami | Paper Link |
| Finite element analysis of ion transport in solid state nuclear waste form materials | Journal Article | Journal of Nuclear Materials | 2017 | Dr. Fazle Rabbi | |
| Critical path-driven property and performance transitions in heterogeneous microstructures | Journal Article | Journal of Materials Science | 2017 | Dr. Fazle Rabbi | |
| CFD Analysis of a SD 7003 Airfoil with a Local Correlation Based Transition and Turbulence Model | Journal Article | IOP Conference Series: Materials Science and Engineering | 2017 | Prof. Dr. Mazharul Islam | Paper Link |
| Cfd Analysis of SD 7003 Airfoil at Low Reynolds Number with A Laiminar Kinetic Energy Based Transition Model | Journal Article | 2017 | Prof. Dr. Mazharul Islam | Paper Link | |
| Study of Mesh Quality Improvement for CFD Analysis of an Airfoil | Journal Article | Jurnal Teknologi | 2017 | Prof. Dr. Mazharul Islam | |
| Performance Analyses Of Horizontal Axis wind Turbines Using QBlade | Others | 2017 | Prof. Dr. Mazharul Islam | ||
| 3D CFD Analysis of Straight-bladed Vertical Axis Wind Turbine using the General Grid Interface | Journal Article | 2017 | Prof. Dr. Mazharul Islam | ||
| Investigation of Wave Characteristics with Rotor Type Water Wave Generator | Journal Article | Journal on Today's Ideas - Tomorrow's Technologies. | 2017 | Mr. Badhan Saha | Paper Link |
| Influence of intermetallic particles on the initiation and growth behavior of hydrogen micropores during high-temperature exposure in Al-Zn-Mg-Cu aluminum alloys | Journal Article | Scripta Materialia | 2017 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Investigating the role of organizational routines in the creation of synergies between Occupational Health and Safety (OHS) and Productivity | Conference Proceedings | The 24th International Annual EurOMA Conference 2017 - Edinburgh, United Kingdom | 2017 | Dr. Abu Hamja | Paper Link |
| A review paper on Lean and Occupational Health and Safety (OHS) in RMG industry | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy (ICMERE2017) | 2017 | Dr. Abu Hamja | |
| Static and Dynamic Characterisation of Flax Fibre-Reinforced Polypropylene Composites | Book | 2017 | Dr. Md Zillur Rahman | Paper Link | |
| Impact energy absorption of flax fiber-reinforced polypropylene composites | Journal Article | Journal of Polymer Composites | 2017 | Dr. Md Zillur Rahman | Paper Link |
| Vibration damping of flax fibre-reinforced polypropylene composites | Journal Article | Journal of Fibers and Polymers | 2017 | Dr. Md Zillur Rahman | Paper Link |
| Wastewater treatment by solar air gap multi-stage membrane distillation | Journal Article | European Water | 2017 | Dr. Istiaq Jamil Siddique | Paper Link |
| Development of Economical Overload Detection System for Maritime Vehicles in Bangladesh | Journal Article | Journal of Maritime Research | 2017 | Dr. Istiaq Jamil Siddique | Paper Link |
| Analyzing the Turbulent Flow Characteristics by Utilizing k-εTurbulence Model | Journal Article | European Journal of Engineering and Technology Research | 2017 | Mr. Md. Ishtiaque Hossain | Paper Link |
| Fatigue crack growth monitoring in composite bonded lap joints by a distributed fibre optic sensing system and comparison with ultrasonic testing | Journal Article | The Journal of Adhesion | 2016 | Dr. Md. Kharshiduzzaman | Paper Link |
| Strain Profile Measurement for Structural Health Monitoring of Woven Carbon-fiber Reinforced Polymer Composite Bonded joints by Fiber Optic Sensing Using an Optical Backscatter Reflectometer | Journal Article | The Journal of Adhesion | 2016 | Dr. Md. Kharshiduzzaman | Paper Link |
| Pressure and Temperature Response of Pneumatic System with Thermal Consideration | Journal Article | Global Journals Inc. (USA), | 2016 | Dr. Fazlar Rahman | |
| Analysis of Accelerated Flow Over an Insulated Wedge Surface by Using Von Karman-Pohlhausen's Momentum Integral Method | Journal Article | Journal of Mechanical Engineering | 2016 | Dr. Fazlar Rahman | |
| Particles impact characteristics on cutting surface during the abrasive water jet machining: Numerical study | Journal Article | Journal of materials processing technology | 2016 | Dr. Dewan Hasan Ahmed | |
| Mechanical Properties of betel nut and glass fiber reinforced hybrid polyethylene composites | Journal Article | International journal of Automotive and Mechanical Engineering (IJAME) | 2016 | Mr. Md. Merajul Haque | Paper Link |
| Effect of angle of attack on an optimized vortex induced vibrated energy harvester: A numerical approach. | Journal Article | AIP Conference Proceedings | 2016 | Dr. Anjan Goswami | Paper Link |
| Conformal Analysis of Ion Transport in Heterogeneous Solid State Nuclear Waste Forms | Others | 2016 | Dr. Fazle Rabbi | ||
| Heterogeneous Materials Design for Sustainable Nuclear Waste Storage Using Life Prediction by Conformal Finite Element Analysis | Others | 2016 | Dr. Fazle Rabbi | ||
| Performance and Strength Prediction of Composite Materials Based on Dielectric Property Investigation | Journal Article | 2016 | Dr. Fazle Rabbi | ||
| Heterogeneous Fracture Mechanics Representations of the Effects of Defects from Manufacturing to End of Life | Others | 2016 | Dr. Fazle Rabbi | ||
| Analysis of an Airfoil using a Transition and Turbulence Model | Journal Article | Applied Mechanics and Materials | 2016 | Prof. Dr. Mazharul Islam | |
| CFD Analysis of a SD 7003 Airfoil with a Local Correlation Based Transition and Turbulence Model | Others | 2016 | Prof. Dr. Mazharul Islam | ||
| Combined microtomography, thermal desorption spectroscopy, X-ray diffraction study of hydrogen trapping behavior in 7XXX aluminum alloys | Journal Article | Materials Science and Engineering: A | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Influences of hydrogen micropores and intermetallic particles on fracture behaviors of Al-Zn-Mg-Cu aluminum alloys | Journal Article | Metallurgical and Materials Transactions A | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Corrigendum to “Combined microtomography, thermal desorption spectroscopy, X-ray diffraction study of hydrogen trapping behavior in 7XXX aluminum alloys”[Mater. Sci. Eng. A 655 (2016) 221--228] | Journal Article | Materials Science and Engineering: A | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Fatigue strength scatter characteristics of JIS SUS630 stainless steel with duplex S--N curve | Journal Article | International Journal of Fatigue | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Influences of hydrogen on deformation and fracture behaviors of high Zn 7XXX aluminum alloys | Journal Article | International Journal of Fracture | 2016 | Dr. Md. Shahnewaz Bhuiyan | |
| Methodology for baseline study - Project: Productivity and occupational health and safety in the garment industry in Bangladesh (POHS-BD) | Book | 2016 | Dr. Abu Hamja | ||
| Vibration Damping of Natural Fibre-reinforced Composite Materials | Conference Proceedings | Proceedings of the 17th European Conference on Composite Materials | 2016 | Dr. Md Zillur Rahman | |
| An experimental study on the performance of closed loop pulsating heat pipe (CLPHP) with methanol as a working fluid | Conference Proceedings | INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING: Proceedings of the 11th International Conference on Mechanical Engineering (ICME 2015) | 2016 | Ms. Zaimaa Salsabil | Paper Link |
| Effect of using ethanol and methanol on thermal performance of a closed loop pulsating heat pipe (CLPHP) with different filling ratios | Conference Proceedings | INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING: Proceedings of the 11th International Conference on Mechanical Engineering (ICME 2015) | 2016 | Ms. Zaimaa Salsabil | Paper Link |
| Heat Transfer Enhancement in Turbulent Flow Through a Circular Tube with Various Arrangements of a Delta Winglet Vortex Generator | Journal Article | International Journal of Energy for a Clean Environment | 2015 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Validated predictive computational methods for surface charge in heterogeneous functional materials: HeteroFoaM™ | Journal Article | Mechanics of Advanced Materials and Modern Processes | 2015 | Dr. Fazle Rabbi | |
| Composite materials damage modeling based on dielectric properties | Journal Article | Materials Sciences and Applications | 2015 | Dr. Fazle Rabbi | |
| CFD Analysis of NACA4415 Airfoil with $\gamma-Re_\theta$ Model considering Natural Transition | Others | 2015 | Prof. Dr. Mazharul Islam | Paper Link | |
| CFD Analysis of SD 7003 Airfoil at Low Reynolds Number with a Laiminar Kinetic Energy based Transition Model | Others | 2015 | Prof. Dr. Mazharul Islam | ||
| Towards Pressure Gradient Sensitive Transitional k-kl-w Model: the Natural Transition for Low Re Airfoils | Others | 2015 | Prof. Dr. Mazharul Islam | Paper Link | |
| Modifications to the k-kL-$\omega$ Transition Model based on Pohlhausen and Falkner-Skan Profiles | Others | 2015 | Prof. Dr. Mazharul Islam | Paper Link | |
| Commercial-Scale Coal- to - SNG Plant: Modeling, Simulation and performance evaluation using Illinois # 6 Coal and IBC low rank coal by Aspen Plus | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy (ICMERE2015) | 2015 | Dr. Abu Hamja | |
| Mathematical Modelling and Experimental Validation of Solar Assisted Heat Pump System | Journal Article | IOSR Journal of Mechanical and Civil Engineering | 2014 | Dr. Mahbubul Muttakin | Paper Link |
| Corrosion Comparison of Galvanized Steel and Aluminium Im Aqueous Environments | Journal Article | International Journal of Automotive and Mechanical Engineering (IJAME) | 2014 | Mr. Md. Merajul Haque | Paper Link |
| Review Of Heat Transfer Augmentation Using Delta Winglet Vortex Generators | Conference Proceedings | 15th Annual Paper Meet of Mechanical Division, IEB | 2014 | Mr. Md. Arif Mahmud Shuklo Shoshe | |
| Heat transfer augmentation in turbulent flow through a circular tube with delta winglet vortex generators | Conference Proceedings | 19th Australasian Fluid Mechanics Conference | 2014 | Mr. Md. Arif Mahmud Shuklo Shoshe | Paper Link |
| Relationship of dielectric property change to composite material state degradation | Journal Article | Composites Science and Technology | 2014 | Dr. Fazle Rabbi | |
| Meso-design of heterogeneous dielectric material systems: Structure property relationships | Journal Article | Journal of Advanced Dielectrics | 2014 | Dr. Fazle Rabbi | |
| Processing-property relationships in advanced multi-functional composite materials: Management of dielectric behavior | Others | 2014 | Dr. Fazle Rabbi | ||
| Nano-Mechanics foundations and experimental methodologies for multiphysics prognosis of functional behaviour in heterogeneous functional materials (HeteroFoaM) | Journal Article | Procedia IUTAM | 2014 | Dr. Fazle Rabbi | |
| Chapter 3: Design of Darrieus-Type Wind Turbines | Others | 2014 | Prof. Dr. Mazharul Islam | ||
| Evaluation of the Prospects of Using Solar Thermal Air-Conditioning Systems in Saudi Arabia | Others | 2014 | Prof. Dr. Mazharul Islam | ||
| Evaluation of the Prospects of Using Solar Thermal Air-Conditioning Systems in Saudi Arabia | Journal Article | Applied Mechanics and Materials | 2014 | Prof. Dr. Mazharul Islam | Paper Link |
| Analysis of an Airfoil using a Transition and Turbulence Model | Others | 2014 | Prof. Dr. Mazharul Islam | ||
| A Study on Catalytic Steam Gasification of HCK Coal by Changing Operating Temperature at Fixed Bed Reactor | Conference Proceedings | Summer Conference, Korea Institute of Energy and Climate Change | 2014 | Dr. Abu Hamja | |
| Modeling of low rank coal and biomass co-gasification for production of syngas by Aspen Plus | Conference Proceedings | Winter Conference, Korea Institute of Energy and Climate Change | 2014 | Dr. Abu Hamja | |
| Single Polymer Composites of Poly(Butylene Terephthalate) Microfibrils Loaded with Carbon Nanotubes Exhibiting Electrical Conductivity and Improved Mechanical Properties | Journal Article | Journal of Macromolecular Materials and Engineering | 2014 | Dr. Md Zillur Rahman | Paper Link |
| Experimental Analysis of Wetting Delay during Jet Impingement Quenching of High Temperature Brass Block | Journal Article | Procedia Engineering | 2013 | Mr. Md. Jubayer Hossain | Paper Link |
| Study and performance simulation of passive suspension system using MATLAB/SIMULINK | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 2013 | Mr. Md. Jubayer Hossain | |
| Corrosion of Galvanized Steel and Copper in Aqueous Environments | Journal Article | Journal of Mechanical Engineering | 2013 | Mr. Md. Merajul Haque | Paper Link |
| Corrosion Behaviour Of Galvanized Steel And Its Subtitutes In Various Environments | Conference Proceedings | International Conference on Mechanical, Industrial and Materials Engineering | 2013 | Mr. Md. Merajul Haque | Paper Link |
| The Effect of Constituent, Interfacial Properties and Morphology on the Dielectric Response of MIEC Membranes | Journal Article | Carbon Dioxide Management and Other Technologies | 2013 | Dr. Fazle Rabbi | |
| A dielectric spectroscopy method of directly assessing composite micro-state evolution during manufacturing and deformation | Journal Article | Society for the Advancement of Material and Process Engineering (SAMPE) | 2013 | Dr. Fazle Rabbi | |
| Multiphysics design and development of heterogeneous functional materials for renewable energy devices: the HeteroFoaM story | Journal Article | Journal of The Electrochemical Society | 2013 | Dr. Fazle Rabbi | |
| Role of micromorphology and interfacial mismatch in the design of heterogeneous functional materials for fuel cell applications | Others | 2013 | Dr. Fazle Rabbi | ||
| Analysis of the plug-in hybrid electric vehicle for the smart grid of Canada | Journal Article | International Journal of Environmental Studies | 2013 | Prof. Dr. Mazharul Islam | Paper Link |
| Fatigue life prediction of sus 630 (H900) steel under high cycle loading | Journal Article | Acta Mechanica Solida Sinica | 2013 | Dr. Md. Shahnewaz Bhuiyan | |
| PHASE CHANGE MATERIALS: Characteristics and Encapsulation | Conference Proceedings | International Conference on Mechanical Engineering and Renewable Energy (ICMERE2013) | 2013 | Dr. Abu Hamja | |
| Fabrication, morphologies and properties of single polymer composites based on LLDPE, PP, and CNT loaded PBT | Book | 2013 | Dr. Md Zillur Rahman | Paper Link | |
| Optical Trapping Forces on Non-Spherical Particles in Fluid Flows | Journal Article | International Journal of Optomechatronics | 2012 | Dr. Dewan Hasan Ahmed | |
| HeteroFoaMs: Electrode modeling in nanostructured heterogeneous materials for energy systems | Journal Article | Journal of Fuel Cell Science and Technology | 2012 | Dr. Fazle Rabbi | |
| Heterofoam: New concepts and tools for heterogeneous functional material design | Journal Article | Advances in Materials Science for Environmental and Energy Technologies: Ceramic Transactions | 2012 | Dr. Fazle Rabbi | |
| Relationship of micromophology to charge storage and transfer properties in heterogeneous functional materials | Others | 2012 | Dr. Fazle Rabbi | ||
| Multi-Physics Functional Design of HeteroFoaM Nanomaterials for Energy Systems | Others | 2012 | Dr. Fazle Rabbi | ||
| Performance analyses of a fixed-pitch straight-bladed VAWT with selected low Reynolds number airfoils | Journal Article | International Journal of Environmental Studies | 2012 | Prof. Dr. Mazharul Islam | Paper Link |
| Renewable-energy education for mechanical engineering undergraduate students | Journal Article | International Journal of Mechanical Engineering Education | 2012 | Prof. Dr. Mazharul Islam | Paper Link |
| The influence of mechanical surface treatments on fatigue behavior of extruded AZ61 magnesium alloy | Journal Article | Materials Science and Engineering: A | 2012 | Dr. Md. Shahnewaz Bhuiyan | |
| Optical forces on non-spherical nanoparticles trapped by optical waveguides | Journal Article | International Journal of Optomechatronics | 2011 | Dr. Dewan Hasan Ahmed | |
| Simulation of non-Newtonian ink transfer between two separating plates for gravure-offset printing | Journal Article | International Journal of Heat and Fluid Flow | 2011 | Dr. Dewan Hasan Ahmed | |
| Non-Newtonian ink transfer in gravure--offset printing | Journal Article | International journal of heat and fluid flow | 2011 | Dr. Dewan Hasan Ahmed | |
| Performance of sub-cooled PEMFCs | Journal Article | International journal of energy research | 2011 | Dr. Dewan Hasan Ahmed | |
| Design and development of an electric hybrid rickshaw. | Conference Proceedings | International Conference on Mechanical Engineering | 2011 | Dr. Anjan Goswami | Paper Link |
| Experimental Mechanics for Prognosis of Material State Changes in Heterogeneous Materials for Energy Systems | Others | 2011 | Dr. Fazle Rabbi | ||
| Effect of Porous Electrode Morphology on Broadband Dielectric Characteristics of SOFC and Methodologies for Analytical Predictions | Others | 2011 | Dr. Fazle Rabbi | ||
| Design analysis of a smaller-capacity straight-bladed VAWT with an asymmetric airfoil | Journal Article | International Journal of Sustainable Energy | 2011 | Prof. Dr. Mazharul Islam | Paper Link |
| Corrosion fatigue behavior of conversion coated and painted AZ61 magnesium alloy | Journal Article | International Journal of Fatigue | 2011 | Dr. Md. Shahnewaz Bhuiyan | Paper Link |
| Corrosion fatigue behavior of die-cast and shot-blasted AM60 magnesium alloy | Journal Article | Materials Science and Engineering: A | 2011 | Dr. Md. Shahnewaz Bhuiyan | |
| The geometrical design of membraneless micro fuel cells: Failure and success | Journal Article | International journal of energy research | 2010 | Dr. Dewan Hasan Ahmed | |
| Relationship of micro-structure morphology to impedance in heterogeneous functional materials | Others | 2010 | Dr. Fazle Rabbi | ||
| Fixed-Pitch Straight-Bladed Vertical Axis Wind Turbine: Design Challenges and Prospective Applications | Others | 2010 | Prof. Dr. Mazharul Islam | ||
| Investigation of Smaller-Capacity Fixed-pitch SB-VAWT for Urban Rooftops | Others | 2010 | Prof. Dr. Mazharul Islam | ||
| Could Saudi Arabia have a major contribution in renewable energy in the near-to-long term future? | Others | 2010 | Prof. Dr. Mazharul Islam | ||
| Thermal Design Correlations for Single- and Two-Phase flow in Meso-Scale Heat Exchangers | Others | 2010 | Prof. Dr. Mazharul Islam | ||
| Corrosion fatigue behavior of extruded magnesium alloy AZ80-T5 in a 5\% NaCl environment | Journal Article | Engineering Fracture Mechanics | 2010 | Dr. Md. Shahnewaz Bhuiyan | |
| Corrosion fatigue behavior of conversion coated AZ61 magnesium alloy | Journal Article | Materials Science and Engineering: A | 2010 | Dr. Md. Shahnewaz Bhuiyan | |
| An H-shaped design for membraneless micro fuel cells | Journal Article | Electrochimica Acta | 2009 | Dr. Dewan Hasan Ahmed | |
| Investigation of low Reynolds number airfoils for fixed- pitch straight-bladed VAWT | Others | 2009 | Prof. Dr. Mazharul Islam | Paper Link | |
| Analysis of Three Selected Design Parameters related to a Fixed-pitch Straight-Bladed Vertical Axis Wind Turbine | Others | 2009 | Prof. Dr. Mazharul Islam | ||
| Computational Analysis of a High-Lift and Low Reynolds Number Airfoil at Turbulent Atmospheric Conditions | Others | 2009 | Prof. Dr. Mazharul Islam | Paper Link | |
| Two Stage S-N curve in Corrosion Fatigue of Extruded Magnesium alloy AZ31 | Journal Article | Songklanakarin Journal of Science and Technology (SJST) | 2009 | Dr. Md. Shahnewaz Bhuiyan | |
| Optimum geometrical design for improved fuel utilization in membraneless micro fuel cell | Journal Article | Journal of Power Sources | 2008 | Dr. Dewan Hasan Ahmed | |
| Reactants flow behavior and water management for different current densities in PEMFC | Journal Article | International journal of heat and mass transfer | 2008 | Dr. Dewan Hasan Ahmed | |
| Effect of GDL permeability on water and thermal management in PEMFCs—I. Isotropic and anisotropic permeability | Journal Article | International Journal of Hydrogen Energy | 2008 | Dr. Dewan Hasan Ahmed | |
| Design of a deflected membrane electrode assembly for PEMFCs | Journal Article | International Journal of Heat and Mass Transfer | 2008 | Dr. Dewan Hasan Ahmed | |
| Effect of GDL permeability on water and thermal management in PEMFCs—II. Clamping force | Journal Article | International journal of hydrogen energy | 2008 | Dr. Dewan Hasan Ahmed | |
| Analysis of Fixed-Pitch Straight-Bladed VAWT with Asymmetric Airfoils | Others | 2008 | Prof. Dr. Mazharul Islam | Paper Link | |
| Aerodynamic models for Darrieus-type straight-bladed vertical axis wind turbines | Journal Article | Renewable and Sustainable Energy Reviews | 2008 | Prof. Dr. Mazharul Islam | Paper Link |
| Performance Analysis of a Smaller-capacity Straight-bladed VAWT with Prospective Airfoils | Others | 2008 | Prof. Dr. Mazharul Islam | ||
| Designing straight-bladed vertical axis wind turbine using the cascade theory | Others | 2008 | Prof. Dr. Mazharul Islam | Paper Link | |
| Design Analysis of Fixed-pitch Straight-bladed Vertical Axis Wind Turbines with an Alternative Material | Others | 2008 | Prof. Dr. Mazharul Islam | ||
| Selection of Airfoils for Straight-Bladed Vertical Axis Wind Turbines Based on Desirable Aerodynamic Characteristics | Others | 2008 | Prof. Dr. Mazharul Islam | Paper Link | |
| A new airfoil for the supporting struts of smaller-capacity straight-bladed VAWT BT - 12th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, MAO, September 10, 2008 - September 12, 2008 | Others | 2008 | Prof. Dr. Mazharul Islam | ||
| Analysis of the Design Parameters related to a Fixed-pitch Straight-Bladed Vertical Axis Wind Turbine | Journal Article | Wind Engineering | 2008 | Prof. Dr. Mazharul Islam | Paper Link |
| Corrosion fatigue behavior of extruded magnesium alloy AZ61 under three different corrosive environments | Journal Article | International Journal of Fatigue | 2008 | Dr. Md. Shahnewaz Bhuiyan | |
| High Cycle Fatigue Behavior of Magnesium Alloys under Corrosive Environment | Journal Article | Key Engineering Materials | 2008 | Dr. Md. Shahnewaz Bhuiyan | |
| Local current density and water management in PEMFCs | Journal Article | International journal of heat and mass transfer | 2007 | Dr. Dewan Hasan Ahmed | |
| Aerodynamic Factors Affecting Performance of Straight-Bladed Vertical Axis Wind Turbines | Others | 2007 | Prof. Dr. Mazharul Islam | Paper Link | |
| Desirable Airfoil Features for Smaller-Capacity Straight-Bladed VAWT | Journal Article | Wind Engineering | 2007 | Prof. Dr. Mazharul Islam | Paper Link |
| Assessment of the small‐capacity straight‐bladed VAWT for sustainable development of Canada | Journal Article | International Journal of Environmental Studies | 2007 | Prof. Dr. Mazharul Islam | Paper Link |
| Design of a Special-purpose Airfoil for Smaller-Capacity Straight-Bladed VAWT | Journal Article | Wind Engineering | 2007 | Prof. Dr. Mazharul Islam | Paper Link |
| Numerical study for the effect of inlet humidity condition at PEMFC channel | Journal Article | Transactions of the Korean Society of Mechanical Engineers B | 2006 | Dr. Dewan Hasan Ahmed | |
| Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density | Journal Article | Journal of Power Sources | 2006 | Dr. Dewan Hasan Ahmed | |
| Effective renewable energy activities in Bangladesh | Journal Article | Renewable Energy | 2006 | Prof. Dr. Mazharul Islam | Paper Link |
| Renewable Energy Powered Rural Community Development Centres in the Developing Countries | Others | 2006 | Prof. Dr. Mazharul Islam | Paper Link | |
| Small-scale decentralized renewable energy systems for the remote communities of the developing countries | Others | 2005 | Prof. Dr. Mazharul Islam | Paper Link | |
| Prospects of Solar Energy Applications in the Off-Shore Islands of Bangladesh | Others | 2005 | Prof. Dr. Mazharul Islam | ||
| Applications of Vertical Axis Wind Turbines for Remote Areas | Others | 2005 | Prof. Dr. Mazharul Islam | ||
| Status of Renewable Energy Technologies in Bangladesh | Journal Article | ISESCO Science {\&} Technology Vision | 2005 | Prof. Dr. Mazharul Islam | |
| Photovoltaic for sustainable livelihoods in off-grid areas of Bangladesh | Others | 2005 | Prof. Dr. Mazharul Islam | ||
| Modelling of the Abrasive Water jet Cutting Process | Journal Article | Wear | 2004 | Dr. Dewan Hasan Ahmed | |
| Prospects of Renewables for Rural Electrification in Bangladesh | Others | 2004 | Prof. Dr. Mazharul Islam | ||
| Solar Energy Options for the Off-grid Areas in the LDCs | Journal Article | Development | 2004 | Prof. Dr. Mazharul Islam | |
| Status of Renewable Energy Technologies in Bangladesh | Others | 2004 | Prof. Dr. Mazharul Islam | ||
| Current utilization and future prospects of emerging renewable energy applications in Canada | Journal Article | Renewable and Sustainable Energy Reviews | 2004 | Prof. Dr. Mazharul Islam | Paper Link |
| The Climate Change Convention: Bangladesh Perspective | Journal Article | Projukti Special Edition, Bangladesh Institution of Engineers, Dhaka Center, Bangladesh | 2003 | Prof. Dr. Mazharul Islam | |
| Renewable Energy Resources for Sustainable Development of Bangladesh | Others | 2003 | Prof. Dr. Mazharul Islam | ||
| Vertical Axis Wind Turbines: Past Initiatives \& Future Prospects | Others | 2003 | Prof. Dr. Mazharul Islam | ||
| Assessment of Renewable Energy Resources Of Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Utilization of Renewable Energies in Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Anthropogenic Climate Change | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Renewable Energy Scenario: Bangladesh Perspective | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Proposal for a Micro Hydro Power Plant at Teesta Canal In Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Energy Efficiency Potentials in the Power Sector of Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Renewable Energy Prospects {\&} Trends in Bangladesh | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Satellite Remote Sensing Applications for Renewable Energy Technologies | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Energy Audit of Ashuganj Power Station Complex | Others | 2002 | Prof. Dr. Mazharul Islam | ||
| Investment Opportunities for Renewable Energy Technologies in Selected Countries | Others | 2001 | Prof. Dr. Mazharul Islam | ||
| Framework for Accelerating the Use of Renewable Energy Technologies in Bangladesh | Others | 2001 | Prof. Dr. Mazharul Islam | ||
| 2{\_}Journal{\_}of{\_}Mechanical{\_}Engineering{\_}2000.pdf | Journal Article | Journal of Mechanical Engineering | 2000 | Prof. Dr. Mazharul Islam | |
| Solar PV Program of Bangladesh Power Development Board | Others | 2000 | Prof. Dr. Mazharul Islam | ||
| Energy Roundup | Others | 1999 | Prof. Dr. Mazharul Islam | ||
| Renewable Energy Sources | Journal Article | Engineering News, Institution of Engineers, Dhaka, Bangladesh | 1999 | Prof. Dr. Mazharul Islam | |
| 1{\_}Journal{\_}of{\_}Energy{\_}Nov99.pdf | Journal Article | Journal of Energy {\&} Environment | 1999 | Prof. Dr. Mazharul Islam | |
| Utilization of Renewable Energy in Bangladesh Power Development Board | Others | 1999 | Prof. Dr. Mazharul Islam | ||
| Solar Photovoltaic Installations in Bangladesh Power Development Board | Others | 1999 | Prof. Dr. Mazharul Islam | ||
| The Internet | Journal Article | Engineering News, Institution of Engineers, Dhaka, Bangladesh | 1999 | Prof. Dr. Mazharul Islam | |
| Theoretical Investigation of Performance Characteristics and Design of VAWT with Pitching | Others | 1998 | Prof. Dr. Mazharul Islam | ||
| Numerical investigation of convective heat transfer characteristics of circular and oval tube banks with vortex generators | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| Influence of alkalisation and eggshell particles on mechanical, thermal and physical properties of rattan-bamboo fibre reinforced hybrid polyester laminated composite | Journal Article | Advances in Materials and Processing Technologies | 0 | Dr. Mohammad Rejaul Haque | |
| Numerical investigation of heat transfer performance for rectangular, elliptical, and airfoil shaped pin fin heatsinks through the novel combination of perforation and bulge inserts | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| Experimental Investigation of Condensation and Freezing Phenomenon on Hydrophilic and Hydrophobic Titanium Nanopillared Glass Surfaces | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| Accelerated freezing due to droplet pinning on a nanopillared surface | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| Droplet Growth Dynamics during Atmospheric Condensation on Nanopillar Surfaces | Journal Article | 0 | Dr. Mohammad Rejaul Haque | ||
| EFFECT OF DIFFERENT FIBERS LOADING ON PALM AND ARAMID FIBER REINFORCED HYBRID EPOXY COMPOSITE | Journal Article | Advances in Materials and Processing Technologies, Taylor & Francis | 0 | Mr. Md. Merajul Haque | |
| PHYSICO-MECHANICAL PROPERTIES INVESTIGATION OF SPONGE-GOURD AND BETEL NUT REINFORCED HYBRID POLYESTER COMPOSITES | Journal Article | Advances in Materials and Processing Technologies, Taylor & Francis | 0 | Mr. Md. Merajul Haque | |
| Study of Heat Transfer Enhancement in Tubular Heat Exchanger with Twisted Tape Inserts | Conference Proceedings | International Conference on Mechanical, Industrial and Energy Engineering | 0 | Mr. Sadman Hassan Labib | Paper Link |
| Eco-friendly food packaging innovations: A review of recent progress on recyclable polymers | Book | In Book: Reference Module in Materials Science and Materials Engineering | 0 | Dr. Md Zillur Rahman | Paper Link |
| Green synthesis of CuO nanoparticles for biological applications | Journal Article | Inorganic Chemistry Communications | 0 | Dr. Md Zillur Rahman | Paper Link |
Faculty of Engineering
Ahsanullah University of Science and Technology
141 & 142, Love Road, Tejgaon Industrial Area, Dhaka-1208
Tel. (8802) 8870422, Ext. 107, 114, Fax : (8802) 8870418
Email: info@aust.edu, regr@aust.edu