MENU

×

Page
  • Page
  • News
  • Events
  • Notice
AHSANULLAH UNIVERSITY OF SCIENCE AND TECHNOLOGY

Department of

Mechanical and Production Engineering




Prof. Dr. Imtiaz Ahmed Choudhury



Designation: Professor

Email: imtiaz.ipe@aust.edu

Office Extension:

Room No:



Research Interests

Educational Background

  • Ph.D, (Manufacturing and Mechanical Engineering), Dublin City University, Ireland
  • Master of Science (MSc), (Mechanical Engnieering), Arizona State University (ASU), USA
  • Masters in Engineering (MEngg), (Mechanical Engineering), Asian Institute of Technology (AIT), Thailand
  • Bachelor in Engineering (BEngg), (Mechanical), Bangladesh University of Engineering and Technology

Honors and Achievements

  • Certificate of Session Chair: 17th Annual Paper Meet, Mechanical Engineering Division: The Institution of Engineers, Bangladesh, 2023
  • Certificate of Keynote Speech: 17th Annual Paper Meet, Mechanical Engineering Division: The Institution of Engineers, Bangladesh, 2023
  • Outstanding Professor Award, IEOM Society International: The Fifth International Conference on Industrial & Mechanical Engineering and Operations Management, 2022
  • Keynote Speaker Certificate: 5th IEOM Dhaka Bangladesh, IEOM Society International, 2022
  • Silver Medal, PECIPTA’17 The International Conference and Exposition on Inventions by Institutions of Higher Learning, 7-9 October 2017, Malaysia, 2017
  • William Johnson Gold Medal, AMPT2016, International Conference on Advances in Material and Processing Technologies, 2017
  • Gold Medal, Malaysian Technological Expo 2016, Malaysian Association of Research Scientists (MARS) held on 18-20 February 2016, 2016
  • Gold Medal, International Invention, Innovation & Technology Exhibition 2016 held on 12-14 May 2016, at Kuala Lumpur, Malaysia, 2016
  • Gold Medal, iCompEx’15 National Innovation and Invention Competition through Exhibition 2015 held on 24-26 March 2015, Malaysia, 2015
  • Silver Medal, Inventions & Innovation Awards 2014, Malaysian Technology Expo, 2014, 20-22 February, 2014, Malaysia, 2014
  • Bronze Medal, PECIPTA International Conference and Exposition on Invention of Institutions of Higher Learning, 7-9 November 2013, Malaysia, 2013

Publications

Book Chapter
  1. Developments in Coatings technologies for optical fibre sensors, Comprehensive Materials Processing, 2nd Edition, 2023, Elsevier. URL
  2. Review of Developments in Sensor Technology For Monitoring of Health-Related Conditions, Reference Module in Materials Science and Materials Engineering 2023, 2023, Elsevier. URL
  3. Review of Recent Developments in processing and application of Aluminium Matrix Composites with Alumina particles, Reference Module in Materials Science and Materials Engineering 2023, 2023, Elsevier. URL
  4. Review of the Developments in Composite Materials Over the Last 15 Years, Reference Module in Materials Science and Materials Engineering 2023, 2023, Elsevier. URL
  5. Review of The Current Issues of Connectivity, Durability and Reliability of Sensors and Their Solutions, Reference Module in Materials Science and Materials Engineering 2023, 2023, Elsevier. URL
  6. Encyclopedia of Renewable and Sustainable Materials (vol. 1 - 5), Encyclopedia of Renewable and Sustainable Materials 2020, 2020, Elsevier. URL
Journal Article
  1. Municipal solid waste management: Identification and analysis of technology selection criteria using Fuzzy Delphi and Fuzzy DEMATEL technique, Heliyon, 2024, Cell Press. URL
  2. Turning SKD 11 Hardened Steel: An Experimental Study of Surface Roughness and Material Removal Rate Using Taguchi Method, Advances in Materials Science and Engineering, 2023, Hindawi. URL
  3. Optimum Utilisation of CuO Nanofluid in Flat Plate Solar Collector, International Journal of Automotive and Mechanical Engineering, 2020.
  4. Metal cutting lubricants and cutting tools: a review on the performance improvement and sustainability assessment, International Journal of Advanced Manufacturing Technology, 2020, Springer.
  5. Current development on using Rotary Inverted Pendulum as a benchmark for testing linear and nonlinear control algorithms ., Mechanical Systems and Signal Processing, 2019, Elsevier. URL
  6. The Effect of Elevated Temperature on the Drawability of a Circular Deep Drawn Metal Cup, Metals, 2019.
  7. A survey on advancement of hybrid type 2 fuzzy sliding mode control, Neural Computing and Applications, 2018, Springer.
  8. Effects of process parameters on the properties of brake pad developed from seashell as reinforcement material using grey relational analysis, Engineering Science And Technology-An International Journal-JESTECH, 2018.
  9. An Investigation into a Gear-Based Knee Joint Designed for Lower Limb Prosthesis., Applied Bionics and Biomechanics, 2017, Hindawi. URL
  10. Effect of Mixing Process Parameters and Suitability of Backbone Polymer for Aluminum Powder Injection Molding Feedstock., SAINS MALAYSIANA, 2017.
  11. Predicting the colour properties of viscose knitted fabrics using soft computing approaches., Journal of the Textile Institute, 2017, Taylor and Francis. URL
  12. Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar, Solar Energy, 2017, Elsevier. URL
  13. Recent advances on the use of meta-heuristic optimization algorithms to optimize the type-2 fuzzy logic systems in intelligent control, Neural Computing and Applications, 2017.
  14. Cuckoo search algorithm-based design of interval Type-2 Fuzzy PID Controller for Furuta pendulum system, Engineering Applications of Artificial Intelligence, 2017.
  15. Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar, Solar Energy, 2017.
  16. Predicting the Mechanical Properties of Viscose/Lycra Knitted Fabrics Using Fuzzy Technique., Advances in Fuzzy Systems, 2016, Hindawi. URL
  17. Dyeing process parameters optimization and colour strength prediction for viscose/lycra blended knitted fabrics using Taguchi method., Journal of the Textile Institute, 2016, Taylor and Francis. URL
  18. Fuzzy Knowledge Based Expert System for Prediction of Color Strength of Cotton Knitted Fabrics, Journal of Engineered Fibres and Fabrics, 2016, SAGE Journals. URL
  19. An off-grid stand-alone wave energy supply system with maximum power extraction scheme for green energy utilization in Malaysian Island., Desalination and Water Treatment, 2016, Taylor and Francis. URL
  20. Prospect of stand-alone wave-powered water desalination system, Desalination and Water Treatment, 2016, Taylor and Francis. URL
  21. An Investigation into Turning of ASSAB-705 Steel Using Multiple Sensors, Materials and Manufacturing Processes, 2016, Springer. URL
  22. Application of acoustic emission sensor to investigate the frequency of tool wear and plastic deformation in tool condition monitoring., Measurement, 2016, Elsevier. URL
  23. Experimental and Theoretical Investigation of Powder-Binder Mixing Mechanism for Metal Injection Molding, Materials and Manufacturing Processes, 2015, Taylor and Francis. URL
  24. Multiple-objective optimization in precision laser cutting of different thermoplastics., Optics And Lasers In Engineering, 2015, Elsevier ScienceDirect. URL
  25. Development of a control system for artificially rehabilitated limbs: a review, Biological Cybernetics, 2015, Springer. URL
  26. Investigation of Tool Wear and Surface Finish by Analyzing Vibration Signals in Turning Assab-705 Steel, Machining Science And Technology, 2015. URL
  27. Technical Study of a Standalone Photovoltaic-Wind Energy Based Hybrid Power Supply Systems for Island Electrification in Malaysia, PLOS ONE, 2015. URL
  28. Computer Aided Design and Fabrication of A Custom Articulated Ankle Foot Orthosis, Journal Of Mechanics in Medicine and Biology, 2015, World Scientific. URL
  29. Process Development and Product Quality of Micro-Metal Powder Injection Molding, Materials and Manufacturing Processes, 2015.
Conference Proceedings
Others
  1. Review of New Developments in Different Types of Sensors Over the Past 15 Years, Reference Module in Materials Science and Materials Engineering 2023, 2023, Elsevier. URL